* [PATCH 0/8] xilinx: Various DT changes and syncups
@ 2020-01-09 14:18 Michal Simek
2020-01-09 14:18 ` [PATCH 1/8] arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up Michal Simek
` (8 more replies)
0 siblings, 9 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-09 14:18 UTC (permalink / raw)
To: u-boot
Hi,
I am sending some patches to fix bugs we found in xilinx release cycle.
Also do some syncs to keep kernel/u-boot dts in pseudo sync.
Thanks,
Michal
Jan Kiszka (1):
arm64: dts: zcu100-revC: Give wifi some time after power-on
Michal Simek (4):
arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up
arm64: dts: zynqmp: Fix node names which contain "_"
arm64: zynqmp: Sync gpio-controller name location
arm64: zynqmp: Sync gem clock nodes with mainline Linux
Rob Herring (1):
arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string
Sudeep Holla (1):
arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source
property
Zumeng Chen (1):
ARM: dts: zynq: enablement of coresight topology
arch/arm/dts/zynq-7000.dtsi | 135 ++++++++++++++++++++++++++++
arch/arm/dts/zynqmp-clk-ccf.dtsi | 22 +++--
arch/arm/dts/zynqmp-clk.dtsi | 4 +-
arch/arm/dts/zynqmp-zcu100-revC.dts | 7 +-
arch/arm/dts/zynqmp-zcu102-revA.dts | 12 +--
arch/arm/dts/zynqmp-zcu102-revB.dts | 2 +-
arch/arm/dts/zynqmp-zcu106-revA.dts | 4 +-
arch/arm/dts/zynqmp-zcu111-revA.dts | 4 +-
arch/arm/dts/zynqmp.dtsi | 14 +--
9 files changed, 172 insertions(+), 32 deletions(-)
--
2.24.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/8] arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
@ 2020-01-09 14:18 ` Michal Simek
2020-01-09 14:18 ` [PATCH 2/8] arm64: dts: Remove inconsistent use of 'arm, armv8' compatible string Michal Simek
` (7 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-09 14:18 UTC (permalink / raw)
To: u-boot
zcu102-revB/up are not removing phy from revA properly because of incorrect
name.
Fixes: 2975a42b42c5 ("arm64: zynqmp: Use ethernet-phy as node name for ethernet phys")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp-zcu102-revB.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index 2132024a253d..38ec18816456 100644
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -25,7 +25,7 @@
/* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */
};
/* Cleanup from RevA */
- /delete-node/ phy at 21;
+ /delete-node/ ethernet-phy at 21;
};
/* Fix collision with u61 */
--
2.24.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/8] arm64: dts: Remove inconsistent use of 'arm, armv8' compatible string
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
2020-01-09 14:18 ` [PATCH 1/8] arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up Michal Simek
@ 2020-01-09 14:18 ` Michal Simek
2020-01-10 15:36 ` Masahiro Yamada
2020-01-09 14:18 ` [PATCH 3/8] arm64: dts: zynqmp: Fix node names which contain "_" Michal Simek
` (6 subsequent siblings)
8 siblings, 1 reply; 12+ messages in thread
From: Michal Simek @ 2020-01-09 14:18 UTC (permalink / raw)
To: u-boot
From: Rob Herring <robh@kernel.org>
The 'arm,armv8' compatible string is only for software models. It adds
little value otherwise and is inconsistently used as a fallback on some
platforms. Remove it from those platforms.
This fixes warnings generated by the DT schema.
Reported-by: Michal Simek <michal.simek@xilinx.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index b453941baf05..8646c4c3a340 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -25,7 +25,7 @@
#size-cells = <0>;
cpu0: cpu at 0 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
operating-points-v2 = <&cpu_opp_table>;
@@ -34,7 +34,7 @@
};
cpu1: cpu at 1 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x1>;
@@ -43,7 +43,7 @@
};
cpu2: cpu at 2 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x2>;
@@ -52,7 +52,7 @@
};
cpu3: cpu at 3 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x3>;
--
2.24.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 3/8] arm64: dts: zynqmp: Fix node names which contain "_"
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
2020-01-09 14:18 ` [PATCH 1/8] arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up Michal Simek
2020-01-09 14:18 ` [PATCH 2/8] arm64: dts: Remove inconsistent use of 'arm, armv8' compatible string Michal Simek
@ 2020-01-09 14:18 ` Michal Simek
2020-01-09 14:18 ` [PATCH 4/8] arm64: dts: zcu100-revC: Give wifi some time after power-on Michal Simek
` (5 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-09 14:18 UTC (permalink / raw)
To: u-boot
s/_/-/ for node names.
It fixes warnings like this:
... Warning (node_name_chars_strict): /cpu_opp_table:
Character '_' not recommended in node name ...
Issues reported by make dtbs W=12
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp-clk.dtsi | 4 ++--
arch/arm/dts/zynqmp-zcu100-revC.dts | 4 ++--
arch/arm/dts/zynqmp-zcu102-revA.dts | 10 +++++-----
arch/arm/dts/zynqmp-zcu106-revA.dts | 2 +-
arch/arm/dts/zynqmp-zcu111-revA.dts | 2 +-
arch/arm/dts/zynqmp.dtsi | 4 ++--
6 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
index 9ef55ad0d18e..c9464ec8eb27 100644
--- a/arch/arm/dts/zynqmp-clk.dtsi
+++ b/arch/arm/dts/zynqmp-clk.dtsi
@@ -61,13 +61,13 @@
clock-accuracy = <100>;
};
- dpdma_clk: dpdma_clk {
+ dpdma_clk: dpdma-clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <533000000>;
};
- drm_clock: drm_clock {
+ drm_clock: drm-clock {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <262750000>;
diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index 106b56b66222..02573a1f3294 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -95,7 +95,7 @@
linux,default-trigger = "bluetooth-power";
};
- vbus_det { /* U5 USB5744 VBUS detection via MIO25 */
+ vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
label = "vbus_det";
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -120,7 +120,7 @@
regulator-boot-on;
};
- sdio_pwrseq: sdio_pwrseq {
+ sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
};
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 78110c490e8d..7d2f59b88c6f 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -58,7 +58,7 @@
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -213,25 +213,25 @@
gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
"", "", "", "", "", "", "", "", "";
- gtr_sel0 {
+ gtr-sel0 {
gpio-hog;
gpios = <0 0>;
output-low; /* PCIE = 0, DP = 1 */
line-name = "sel0";
};
- gtr_sel1 {
+ gtr-sel1 {
gpio-hog;
gpios = <1 0>;
output-high; /* PCIE = 0, DP = 1 */
line-name = "sel1";
};
- gtr_sel2 {
+ gtr-sel2 {
gpio-hog;
gpios = <2 0>;
output-high; /* PCIE = 0, USB0 = 1 */
line-name = "sel2";
};
- gtr_sel3 {
+ gtr-sel3 {
gpio-hog;
gpios = <3 0>;
output-high; /* PCIE = 0, SATA = 1 */
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 7c73ff283e7a..6faac956848b 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -58,7 +58,7 @@
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index ca95d7e059a8..5b648ceb2df6 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -58,7 +58,7 @@
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 8646c4c3a340..232fd0c11cd7 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -74,7 +74,7 @@
};
};
- cpu_opp_table: cpu_opp_table {
+ cpu_opp_table: cpu-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp00 {
@@ -252,7 +252,7 @@
};
};
- amba_apu: amba_apu at 0 {
+ amba_apu: amba-apu at 0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
--
2.24.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 4/8] arm64: dts: zcu100-revC: Give wifi some time after power-on
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
` (2 preceding siblings ...)
2020-01-09 14:18 ` [PATCH 3/8] arm64: dts: zynqmp: Fix node names which contain "_" Michal Simek
@ 2020-01-09 14:18 ` Michal Simek
2020-01-09 14:18 ` [PATCH 5/8] arm64: dts: zynqmp: replace gpio-key, wakeup with wakeup-source property Michal Simek
` (4 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-09 14:18 UTC (permalink / raw)
To: u-boot
From: Jan Kiszka <jan.kiszka@siemens.com>
Somewhere along recent changes to power control of the wl1831, power-on
became very unreliable on the Ultra96, failing like this:
wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16
After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms,
Ultra96 is already happy with 10 ms.
Fixes: 5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp-zcu100-revC.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index 02573a1f3294..986f50cf323d 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -123,6 +123,7 @@
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ post-power-on-delay-ms = <10>;
};
ina226 {
--
2.24.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 5/8] arm64: dts: zynqmp: replace gpio-key, wakeup with wakeup-source property
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
` (3 preceding siblings ...)
2020-01-09 14:18 ` [PATCH 4/8] arm64: dts: zcu100-revC: Give wifi some time after power-on Michal Simek
@ 2020-01-09 14:18 ` Michal Simek
2020-01-09 14:18 ` [PATCH 6/8] arm64: zynqmp: Sync gpio-controller name location Michal Simek
` (3 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-09 14:18 UTC (permalink / raw)
To: u-boot
From: Sudeep Holla <sudeep.holla@arm.com>
Most of the legacy "gpio-key,wakeup" boolean property is already
replaced with "wakeup-source". However few occurrences of old property
has popped up again, probably from the remnants in downstream trees.
This patch replaces the legacy properties with the unified
"wakeup-source" property introduced by:
"Input: gpio_keys - switch to using generic device properties"
(sha1: 700a38b27eefc582099fdf69effacfad0ad738a4)
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp-zcu100-revC.dts | 2 +-
arch/arm/dts/zynqmp-zcu102-revA.dts | 2 +-
arch/arm/dts/zynqmp-zcu106-revA.dts | 2 +-
arch/arm/dts/zynqmp-zcu111-revA.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index 986f50cf323d..21118c8cc34a 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -53,7 +53,7 @@
label = "sw4";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 7d2f59b88c6f..b580f9263d02 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -51,7 +51,7 @@
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 6faac956848b..d31982fce784 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -51,7 +51,7 @@
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 5b648ceb2df6..bff224f78d1d 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -51,7 +51,7 @@
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
--
2.24.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 6/8] arm64: zynqmp: Sync gpio-controller name location
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
` (4 preceding siblings ...)
2020-01-09 14:18 ` [PATCH 5/8] arm64: dts: zynqmp: replace gpio-key, wakeup with wakeup-source property Michal Simek
@ 2020-01-09 14:18 ` Michal Simek
2020-01-09 14:18 ` [PATCH 7/8] arm64: zynqmp: Sync gem clock nodes with mainline Linux Michal Simek
` (2 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-09 14:18 UTC (permalink / raw)
To: u-boot
Sync location with mainline kernel.
Added by Linux kernel commit 75926f07baae
("arm64: dts: zynqmp: Add missing gpio-controller to ps gpio").
Fixes: 0b33e0b15600 ("arm64: zynqmp: Add missing gpio property to dtsi")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 232fd0c11cd7..9e7fae83f787 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -626,12 +626,12 @@
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
+ gpio-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
- gpio-controller;
power-domains = <&zynqmp_firmware PD_GPIO>;
};
--
2.24.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 7/8] arm64: zynqmp: Sync gem clock nodes with mainline Linux
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
` (5 preceding siblings ...)
2020-01-09 14:18 ` [PATCH 6/8] arm64: zynqmp: Sync gpio-controller name location Michal Simek
@ 2020-01-09 14:18 ` Michal Simek
2020-01-09 14:18 ` [PATCH 8/8] ARM: dts: zynq: enablement of coresight topology Michal Simek
2020-01-16 7:08 ` [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
8 siblings, 0 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-09 14:18 UTC (permalink / raw)
To: u-boot
Just fixing indentation and update year in Copyright.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynqmp-clk-ccf.dtsi | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi
index 998298cc9bee..8eacd22d7cda 100644
--- a/arch/arm/dts/zynqmp-clk-ccf.dtsi
+++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi
@@ -2,7 +2,7 @@
/*
* Clock specification for Xilinx ZynqMP
*
- * (C) Copyright 2017, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -173,26 +173,30 @@
};
&gem0 {
- clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk GEM0_TX>,
- <&zynqmp_clk GEM0_RX>, <&zynqmp_clk GEM_TSU>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
+ <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
+ <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gem1 {
- clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, <&zynqmp_clk GEM1_TX>,
- <&zynqmp_clk GEM1_RX>, <&zynqmp_clk GEM_TSU>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+ <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+ <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gem2 {
- clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>, <&zynqmp_clk GEM2_TX>,
- <&zynqmp_clk GEM2_RX>, <&zynqmp_clk GEM_TSU>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
+ <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
+ <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gem3 {
- clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>, <&zynqmp_clk GEM3_TX>,
- <&zynqmp_clk GEM3_RX>, <&zynqmp_clk GEM_TSU>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
+ <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
+ <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
--
2.24.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 8/8] ARM: dts: zynq: enablement of coresight topology
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
` (6 preceding siblings ...)
2020-01-09 14:18 ` [PATCH 7/8] arm64: zynqmp: Sync gem clock nodes with mainline Linux Michal Simek
@ 2020-01-09 14:18 ` Michal Simek
2020-01-16 7:08 ` [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
8 siblings, 0 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-09 14:18 UTC (permalink / raw)
To: u-boot
From: Zumeng Chen <zumeng.chen@windriver.com>
This patch is to build the coresight topology structure of zynq-7000
series according to the docs of coresight and userguide of zynq-7000.
Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/dts/zynq-7000.dtsi | 135 ++++++++++++++++++++++++++++++++++++
1 file changed, 135 insertions(+)
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 07dfa0d1074f..c35eb2344fa8 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -62,6 +62,39 @@
regulator-always-on;
};
+ replicator {
+ compatible = "arm,coresight-static-replicator";
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port at 0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+ };
+ in-ports {
+ /* replicator input port */
+ port {
+ replicator_in_port0: endpoint {
+ remote-endpoint = <&funnel_out_port>;
+ };
+ };
+ };
+ };
+
amba: amba {
u-boot,dm-pre-reloc;
compatible = "simple-bus";
@@ -415,5 +448,107 @@
reg = <0xf8005000 0x1000>;
timeout-sec = <10>;
};
+
+ etb at f8801000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0xf8801000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+ };
+
+ tpiu at f8803000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0xf8803000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+ };
+
+ funnel at f8804000 {
+ compatible = "arm,coresight-static-funnel", "arm,primecell";
+ reg = <0xf8804000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ /* funnel output ports */
+ out-ports {
+ port {
+ funnel_out_port: endpoint {
+ remote-endpoint =
+ <&replicator_in_port0>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port at 0 {
+ reg = <0>;
+ funnel0_in_port0: endpoint {
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ funnel0_in_port1: endpoint {
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ funnel0_in_port2: endpoint {
+ };
+ };
+ /* The other input ports are not connect to anything */
+ };
+ };
+
+ ptm at f889c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889c000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
+ };
+ };
+ };
+
+ ptm at f889d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889d000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
+ };
+ };
+ };
};
};
--
2.24.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/8] arm64: dts: Remove inconsistent use of 'arm, armv8' compatible string
2020-01-09 14:18 ` [PATCH 2/8] arm64: dts: Remove inconsistent use of 'arm, armv8' compatible string Michal Simek
@ 2020-01-10 15:36 ` Masahiro Yamada
2020-01-13 6:50 ` Michal Simek
0 siblings, 1 reply; 12+ messages in thread
From: Masahiro Yamada @ 2020-01-10 15:36 UTC (permalink / raw)
To: u-boot
On Thu, Jan 9, 2020 at 11:19 PM Michal Simek <michal.simek@xilinx.com> wrote:
>
> From: Rob Herring <robh@kernel.org>
>
> The 'arm,armv8' compatible string is only for software models. It adds
> little value otherwise and is inconsistently used as a fallback on some
> platforms. Remove it from those platforms.
>
> This fixes warnings generated by the DT schema.
>
> Reported-by: Michal Simek <michal.simek@xilinx.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
> Acked-by: Nishanth Menon <nm@ti.com>
> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Acked-by: Chanho Min <chanho.min@lge.com>
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> Acked-by: Thierry Reding <treding@nvidia.com>
> Acked-by: Heiko Stuebner <heiko@sntech.de>
> Acked-by: Simon Horman <horms+renesas@verge.net.au>
> Acked-by: Tero Kristo <t-kristo@ti.com>
> Acked-by: Wei Xu <xuwei5@hisilicon.com>
> Acked-by: Liviu Dudau <liviu.dudau@arm.com>
> Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
> Acked-by: Michal Simek <michal.simek@xilinx.com>
> Acked-by: Scott Branden <scott.branden@broadcom.com>
> Acked-by: Kevin Hilman <khilman@baylibre.com>
> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
> Acked-by: Robert Richter <rrichter@cavium.com>
> Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
> Acked-by: Dinh Nguyen <dinguyen@kernel.org>
I know you are importing this commit from Linux,
but these Ack lines look weird to me...
> Signed-off-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> arch/arm/dts/zynqmp.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
> index b453941baf05..8646c4c3a340 100644
> --- a/arch/arm/dts/zynqmp.dtsi
> +++ b/arch/arm/dts/zynqmp.dtsi
> @@ -25,7 +25,7 @@
> #size-cells = <0>;
>
> cpu0: cpu at 0 {
> - compatible = "arm,cortex-a53", "arm,armv8";
> + compatible = "arm,cortex-a53";
> device_type = "cpu";
> enable-method = "psci";
> operating-points-v2 = <&cpu_opp_table>;
> @@ -34,7 +34,7 @@
> };
>
> cpu1: cpu at 1 {
> - compatible = "arm,cortex-a53", "arm,armv8";
> + compatible = "arm,cortex-a53";
> device_type = "cpu";
> enable-method = "psci";
> reg = <0x1>;
> @@ -43,7 +43,7 @@
> };
>
> cpu2: cpu at 2 {
> - compatible = "arm,cortex-a53", "arm,armv8";
> + compatible = "arm,cortex-a53";
> device_type = "cpu";
> enable-method = "psci";
> reg = <0x2>;
> @@ -52,7 +52,7 @@
> };
>
> cpu3: cpu at 3 {
> - compatible = "arm,cortex-a53", "arm,armv8";
> + compatible = "arm,cortex-a53";
> device_type = "cpu";
> enable-method = "psci";
> reg = <0x3>;
> --
> 2.24.0
>
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/8] arm64: dts: Remove inconsistent use of 'arm, armv8' compatible string
2020-01-10 15:36 ` Masahiro Yamada
@ 2020-01-13 6:50 ` Michal Simek
0 siblings, 0 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-13 6:50 UTC (permalink / raw)
To: u-boot
On 10. 01. 20 16:36, Masahiro Yamada wrote:
> On Thu, Jan 9, 2020 at 11:19 PM Michal Simek <michal.simek@xilinx.com> wrote:
>>
>> From: Rob Herring <robh@kernel.org>
>>
>> The 'arm,armv8' compatible string is only for software models. It adds
>> little value otherwise and is inconsistently used as a fallback on some
>> platforms. Remove it from those platforms.
>>
>> This fixes warnings generated by the DT schema.
>>
>> Reported-by: Michal Simek <michal.simek@xilinx.com>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: Will Deacon <will.deacon@arm.com>
>> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
>> Acked-by: Nishanth Menon <nm@ti.com>
>> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
>> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>> Acked-by: Chanho Min <chanho.min@lge.com>
>> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
>> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
>> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
>> Acked-by: Thierry Reding <treding@nvidia.com>
>> Acked-by: Heiko Stuebner <heiko@sntech.de>
>> Acked-by: Simon Horman <horms+renesas@verge.net.au>
>> Acked-by: Tero Kristo <t-kristo@ti.com>
>> Acked-by: Wei Xu <xuwei5@hisilicon.com>
>> Acked-by: Liviu Dudau <liviu.dudau@arm.com>
>> Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
>> Acked-by: Michal Simek <michal.simek@xilinx.com>
>> Acked-by: Scott Branden <scott.branden@broadcom.com>
>> Acked-by: Kevin Hilman <khilman@baylibre.com>
>> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
>> Acked-by: Robert Richter <rrichter@cavium.com>
>> Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
>> Acked-by: Dinh Nguyen <dinguyen@kernel.org>
>
>
> I know you are importing this commit from Linux,
> but these Ack lines look weird to me...
I have not a problem to remove them but not sure if this is the right
thing to do.
Thanks,
Michal
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 0/8] xilinx: Various DT changes and syncups
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
` (7 preceding siblings ...)
2020-01-09 14:18 ` [PATCH 8/8] ARM: dts: zynq: enablement of coresight topology Michal Simek
@ 2020-01-16 7:08 ` Michal Simek
8 siblings, 0 replies; 12+ messages in thread
From: Michal Simek @ 2020-01-16 7:08 UTC (permalink / raw)
To: u-boot
On 09. 01. 20 15:18, Michal Simek wrote:
> Hi,
>
> I am sending some patches to fix bugs we found in xilinx release cycle.
> Also do some syncs to keep kernel/u-boot dts in pseudo sync.
>
> Thanks,
> Michal
>
>
> Jan Kiszka (1):
> arm64: dts: zcu100-revC: Give wifi some time after power-on
>
> Michal Simek (4):
> arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up
> arm64: dts: zynqmp: Fix node names which contain "_"
> arm64: zynqmp: Sync gpio-controller name location
> arm64: zynqmp: Sync gem clock nodes with mainline Linux
>
> Rob Herring (1):
> arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string
>
> Sudeep Holla (1):
> arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source
> property
>
> Zumeng Chen (1):
> ARM: dts: zynq: enablement of coresight topology
>
> arch/arm/dts/zynq-7000.dtsi | 135 ++++++++++++++++++++++++++++
> arch/arm/dts/zynqmp-clk-ccf.dtsi | 22 +++--
> arch/arm/dts/zynqmp-clk.dtsi | 4 +-
> arch/arm/dts/zynqmp-zcu100-revC.dts | 7 +-
> arch/arm/dts/zynqmp-zcu102-revA.dts | 12 +--
> arch/arm/dts/zynqmp-zcu102-revB.dts | 2 +-
> arch/arm/dts/zynqmp-zcu106-revA.dts | 4 +-
> arch/arm/dts/zynqmp-zcu111-revA.dts | 4 +-
> arch/arm/dts/zynqmp.dtsi | 14 +--
> 9 files changed, 172 insertions(+), 32 deletions(-)
>
Apply all.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 195 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200116/b3bbe113/attachment.sig>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-01-16 7:08 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
2020-01-09 14:18 ` [PATCH 1/8] arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up Michal Simek
2020-01-09 14:18 ` [PATCH 2/8] arm64: dts: Remove inconsistent use of 'arm, armv8' compatible string Michal Simek
2020-01-10 15:36 ` Masahiro Yamada
2020-01-13 6:50 ` Michal Simek
2020-01-09 14:18 ` [PATCH 3/8] arm64: dts: zynqmp: Fix node names which contain "_" Michal Simek
2020-01-09 14:18 ` [PATCH 4/8] arm64: dts: zcu100-revC: Give wifi some time after power-on Michal Simek
2020-01-09 14:18 ` [PATCH 5/8] arm64: dts: zynqmp: replace gpio-key, wakeup with wakeup-source property Michal Simek
2020-01-09 14:18 ` [PATCH 6/8] arm64: zynqmp: Sync gpio-controller name location Michal Simek
2020-01-09 14:18 ` [PATCH 7/8] arm64: zynqmp: Sync gem clock nodes with mainline Linux Michal Simek
2020-01-09 14:18 ` [PATCH 8/8] ARM: dts: zynq: enablement of coresight topology Michal Simek
2020-01-16 7:08 ` [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox