[PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k

[PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k

[Baruch Siach]

This series adds NAND flash support to Aramda 8k systems. Patches make the 
necessary changes to the pxa3xx_nand driver and DT files.

v2:
  Rebase on current master. Fixes conflict with commit 661c98121d4 ("mtd: nand:
  pxa3xx: Fix not calling dev_xxx with a device")

Baruch Siach (2):
  arm: dts: armada-cp110-master: update nand-controller
  mtd: pxa3xx_nand: remove dead code

Shmuel Hazan (3):
  arm: dts: armada-cp110-slave: add missing cps_nand
  mtd: pxa3xx_nand: port to use driver model
  mtd: nand: pxa3xx: enable NAND controller if the SoC needs it

 arch/arm/dts/armada-cp110-master.dtsi |  15 ++-
 arch/arm/dts/armada-cp110-slave.dtsi  |  16 +++
 drivers/mtd/nand/raw/Kconfig          |   2 +
 drivers/mtd/nand/raw/pxa3xx_nand.c    | 179 ++++++++++++++------------
 4 files changed, 124 insertions(+), 88 deletions(-)

-- 
2.28.0

[PATCH v2 1/5] arm: dts: armada-cp110-slave: add missing cps_nand

[Baruch Siach]

From: Shmuel Hazan <shmuel.h@siklu.com>

Align node properties to kernel dts node.

Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.

Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 arch/arm/dts/armada-cp110-slave.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/dts/armada-cp110-slave.dtsi b/arch/arm/dts/armada-cp110-slave.dtsi
index b426a4eb6910..6cf217783709 100644
--- a/arch/arm/dts/armada-cp110-slave.dtsi
+++ b/arch/arm/dts/armada-cp110-slave.dtsi
@@ -267,6 +267,22 @@
 				utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
 				status = "disabled";
 			};
+
+			cps_nand: nand at 720000 {
+				compatible = "marvell,armada-8k-nand-controller",
+					"marvell,armada370-nand-controller";
+				reg = <0x720000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core", "reg";
+				clocks = <&cps_syscon0 1 2>,
+					 <&cps_syscon0 1 17>;
+				marvell,system-controller = <&cps_syscon0>;
+				nand-enable-arbiter;
+				num-cs = <1>;
+				status = "disabled";
+			};
 		};
 
 		cps_pcie0: pcie at f4600000 {
-- 
2.28.0

[PATCH v2 1/5] arm: dts: armada-cp110-slave: add missing cps_nand

[Stefan Roese]

On 18.10.20 14:56, Baruch Siach wrote:
> From: Shmuel Hazan <shmuel.h@siklu.com>
> 
> Align node properties to kernel dts node.
> 
> Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
> with the current driver.
> 
> Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
>   arch/arm/dts/armada-cp110-slave.dtsi | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/dts/armada-cp110-slave.dtsi b/arch/arm/dts/armada-cp110-slave.dtsi
> index b426a4eb6910..6cf217783709 100644
> --- a/arch/arm/dts/armada-cp110-slave.dtsi
> +++ b/arch/arm/dts/armada-cp110-slave.dtsi
> @@ -267,6 +267,22 @@
>   				utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
>   				status = "disabled";
>   			};
> +
> +			cps_nand: nand at 720000 {
> +				compatible = "marvell,armada-8k-nand-controller",
> +					"marvell,armada370-nand-controller";
> +				reg = <0x720000 0x54>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core", "reg";
> +				clocks = <&cps_syscon0 1 2>,
> +					 <&cps_syscon0 1 17>;
> +				marvell,system-controller = <&cps_syscon0>;
> +				nand-enable-arbiter;
> +				num-cs = <1>;
> +				status = "disabled";
> +			};
>   		};
>   
>   		cps_pcie0: pcie at f4600000 {
> 


Viele Gr??e,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de

[PATCH v2 2/5] arm: dts: armada-cp110-master: update nand-controller

[Baruch Siach]

Align node properties to kernel dts node.

The change of compatible property does not affect any currently
supported board.

Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 arch/arm/dts/armada-cp110-master.dtsi | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi
index cd5c974482e6..7d0d31da306d 100644
--- a/arch/arm/dts/armada-cp110-master.dtsi
+++ b/arch/arm/dts/armada-cp110-master.dtsi
@@ -285,15 +285,18 @@
 			};
 
 			cpm_nand: nand at 720000 {
-				compatible = "marvell,mvebu-pxa3xx-nand";
-				reg = <0x720000 0x100>;
+				compatible = "marvell,armada-8k-nand-controller",
+					"marvell,armada370-nand-controller";
+				reg = <0x720000 0x54>;
 				#address-cells = <1>;
-
-				clocks = <&cpm_syscon0 1 2>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core", "reg";
+				clocks = <&cpm_syscon0 1 2>,
+					 <&cpm_syscon0 1 17>;
+				marvell,system-controller = <&cpm_syscon0>;
 				nand-enable-arbiter;
 				num-cs = <1>;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
 				status = "disabled";
 			};
 
-- 
2.28.0

[PATCH v2 2/5] arm: dts: armada-cp110-master: update nand-controller

[Stefan Roese]

On 18.10.20 14:56, Baruch Siach wrote:
> Align node properties to kernel dts node.
> 
> The change of compatible property does not affect any currently
> supported board.
> 
> Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
> with the current driver.
> 
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
>   arch/arm/dts/armada-cp110-master.dtsi | 15 +++++++++------
>   1 file changed, 9 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi
> index cd5c974482e6..7d0d31da306d 100644
> --- a/arch/arm/dts/armada-cp110-master.dtsi
> +++ b/arch/arm/dts/armada-cp110-master.dtsi
> @@ -285,15 +285,18 @@
>   			};
>   
>   			cpm_nand: nand at 720000 {
> -				compatible = "marvell,mvebu-pxa3xx-nand";
> -				reg = <0x720000 0x100>;
> +				compatible = "marvell,armada-8k-nand-controller",
> +					"marvell,armada370-nand-controller";
> +				reg = <0x720000 0x54>;
>   				#address-cells = <1>;
> -
> -				clocks = <&cpm_syscon0 1 2>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core", "reg";
> +				clocks = <&cpm_syscon0 1 2>,
> +					 <&cpm_syscon0 1 17>;
> +				marvell,system-controller = <&cpm_syscon0>;
>   				nand-enable-arbiter;
>   				num-cs = <1>;
> -				nand-ecc-strength = <4>;
> -				nand-ecc-step-size = <512>;
>   				status = "disabled";
>   			};
>   
> 


Viele Gr??e,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de

[PATCH v2 3/5] mtd: pxa3xx_nand: port to use driver model

[Baruch Siach]

From: Shmuel Hazan <shmuel.h@siklu.com>

Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 drivers/mtd/nand/raw/Kconfig       |   2 +
 drivers/mtd/nand/raw/pxa3xx_nand.c | 117 +++++++++++++----------------
 2 files changed, 55 insertions(+), 64 deletions(-)

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index cd7e598aa8a7..08df12a3daf9 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -195,6 +195,8 @@ endif
 config NAND_PXA3XX
 	bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
 	select SYS_NAND_SELF_INIT
+	select DM_MTD
+	select SYSCON
 	imply CMD_NAND
 	help
 	  This enables the driver for the NAND flash device found on
diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c
index 5fb3081c8390..6f66db065357 100644
--- a/drivers/mtd/nand/raw/pxa3xx_nand.c
+++ b/drivers/mtd/nand/raw/pxa3xx_nand.c
@@ -22,6 +22,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/types.h>
+#include <dm/uclass.h>
+#include <dm/read.h>
 
 #include "pxa3xx_nand.h"
 
@@ -417,6 +419,14 @@ static struct nand_ecclayout ecc_layout_8KB_bch8bit = {
 /* convert nano-seconds to nand flash controller clock cycles */
 #define ns2cycle(ns, clk)	(int)((ns) * (clk / 1000000) / 1000)
 
+static const struct udevice_id pxa3xx_nand_dt_ids[] = {
+	{
+		.compatible = "marvell,mvebu-pxa3xx-nand",
+		.data = PXA3XX_NAND_VARIANT_ARMADA370,
+	},
+	{}
+};
+
 static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(void)
 {
 	/* We only support the Armada 370/XP/38x for now */
@@ -1809,82 +1819,60 @@ fail_disable_clk:
 	return ret;
 }
 
-static int pxa3xx_nand_probe_dt(struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_probe_dt(struct udevice *dev, struct pxa3xx_nand_info *info)
 {
 	struct pxa3xx_nand_platform_data *pdata;
-	const void *blob = gd->fdt_blob;
-	int node = -1;
 
 	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
 
-	/* Get address decoding nodes from the FDT blob */
-	do {
-		node = fdt_node_offset_by_compatible(blob, node,
-						     "marvell,mvebu-pxa3xx-nand");
-		if (node < 0)
-			break;
-
-		/* Bypass disabeld nodes */
-		if (!fdtdec_get_is_enabled(blob, node))
-			continue;
-
-		/* Get the first enabled NAND controler base address */
-		info->mmio_base =
-			(void __iomem *)fdtdec_get_addr_size_auto_noparent(
-					blob, node, "reg", 0, NULL, true);
+	info->mmio_base = dev_read_addr_ptr(dev);
 
-		pdata->num_cs = fdtdec_get_int(blob, node, "num-cs", 1);
-		if (pdata->num_cs != 1) {
-			pr_err("pxa3xx driver supports single CS only\n");
-			break;
-		}
-
-		if (fdtdec_get_bool(blob, node, "nand-enable-arbiter"))
-			pdata->enable_arbiter = 1;
+	pdata->num_cs = dev_read_u32_default(dev, "num-cs", 1);
+	if (pdata->num_cs != 1) {
+		pr_err("pxa3xx driver supports single CS only\n");
+		return -EINVAL;
+	}
 
-		if (fdtdec_get_bool(blob, node, "nand-keep-config"))
-			pdata->keep_config = 1;
+	if (dev_read_bool(dev, "nand-enable-arbiter"))
+		pdata->enable_arbiter = 1;
 
-		/*
-		 * ECC parameters.
-		 * If these are not set, they will be selected according
-		 * to the detected flash type.
-		 */
-		/* ECC strength */
-		pdata->ecc_strength = fdtdec_get_int(blob, node,
-						     "nand-ecc-strength", 0);
+	if (dev_read_bool(dev, "nand-keep-config"))
+		pdata->keep_config = 1;
 
-		/* ECC step size */
-		pdata->ecc_step_size = fdtdec_get_int(blob, node,
-						      "nand-ecc-step-size", 0);
-
-		info->pdata = pdata;
+	/*
+	 * ECC parameters.
+	 * If these are not set, they will be selected according
+	 * to the detected flash type.
+	 */
+	/* ECC strength */
+	pdata->ecc_strength = dev_read_u32_default(dev, "nand-ecc-strength", 0);
 
-		/* Currently support only a single NAND controller */
-		return 0;
+	/* ECC step size */
+	pdata->ecc_step_size = dev_read_u32_default(dev, "nand-ecc-step-size",
+			0);
 
-	} while (node >= 0);
+	info->pdata = pdata;
 
-	return -EINVAL;
+	return 0;
 }
 
-static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_probe(struct udevice *dev)
 {
-	struct mtd_info *mtd = &info->controller.active->mtd;
 	struct pxa3xx_nand_platform_data *pdata;
 	int ret, cs, probe_success;
+	struct pxa3xx_nand_info *info = dev_get_priv(dev);
 
-	ret = pxa3xx_nand_probe_dt(info);
+	ret = pxa3xx_nand_probe_dt(dev, info);
 	if (ret)
 		return ret;
 
 	pdata = info->pdata;
 
-	ret = alloc_nand_resource(info);
+	ret = alloc_nand_resource(dev, info);
 	if (ret) {
-		dev_err(mtd->dev, "alloc nand resource failed\n");
+		dev_err(dev, "alloc nand resource failed\n");
 		return ret;
 	}
 
@@ -1918,22 +1906,23 @@ static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
 	return 0;
 }
 
-/*
- * Main initialization routine
- */
+U_BOOT_DRIVER(pxa3xx_nand) = {
+	.name = "pxa3xx-nand",
+	.id = UCLASS_MTD,
+	.of_match = pxa3xx_nand_dt_ids,
+	.probe = pxa3xx_nand_probe,
+	.priv_auto_alloc_size = sizeof(struct pxa3xx_nand_info) +
+		sizeof(struct pxa3xx_nand_host) * CONFIG_SYS_MAX_NAND_DEVICE,
+};
+
 void board_nand_init(void)
 {
-	struct pxa3xx_nand_info *info;
-	struct pxa3xx_nand_host *host;
+	struct udevice *dev;
 	int ret;
 
-	info = kzalloc(sizeof(*info) +
-		       sizeof(*host) * CONFIG_SYS_MAX_NAND_DEVICE,
-		       GFP_KERNEL);
-	if (!info)
-		return;
-
-	ret = pxa3xx_nand_probe(info);
-	if (ret)
-		return;
+	ret = uclass_get_device_by_driver(UCLASS_MTD,
+			DM_GET_DRIVER(pxa3xx_nand), &dev);
+	if (ret && ret != -ENODEV)
+		pr_err("Failed to initialize %s. (error %d)\n", dev->name,
+			   ret);
 }
-- 
2.28.0

[PATCH v2 3/5] mtd: pxa3xx_nand: port to use driver model

[Stefan Roese]

On 18.10.20 14:56, Baruch Siach wrote:
> From: Shmuel Hazan <shmuel.h@siklu.com>
> 

Please add at least a minimal commit text here.

> Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> ---
>   drivers/mtd/nand/raw/Kconfig       |   2 +
>   drivers/mtd/nand/raw/pxa3xx_nand.c | 117 +++++++++++++----------------
>   2 files changed, 55 insertions(+), 64 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index cd7e598aa8a7..08df12a3daf9 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -195,6 +195,8 @@ endif
>   config NAND_PXA3XX
>   	bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
>   	select SYS_NAND_SELF_INIT
> +	select DM_MTD
> +	select SYSCON
>   	imply CMD_NAND
>   	help
>   	  This enables the driver for the NAND flash device found on
> diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c
> index 5fb3081c8390..6f66db065357 100644
> --- a/drivers/mtd/nand/raw/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/raw/pxa3xx_nand.c
> @@ -22,6 +22,8 @@
>   #include <linux/mtd/mtd.h>
>   #include <linux/mtd/rawnand.h>
>   #include <linux/types.h>
> +#include <dm/uclass.h>
> +#include <dm/read.h>
>   
>   #include "pxa3xx_nand.h"
>   
> @@ -417,6 +419,14 @@ static struct nand_ecclayout ecc_layout_8KB_bch8bit = {
>   /* convert nano-seconds to nand flash controller clock cycles */
>   #define ns2cycle(ns, clk)	(int)((ns) * (clk / 1000000) / 1000)
>   
> +static const struct udevice_id pxa3xx_nand_dt_ids[] = {
> +	{
> +		.compatible = "marvell,mvebu-pxa3xx-nand",
> +		.data = PXA3XX_NAND_VARIANT_ARMADA370,
> +	},
> +	{}
> +};
> +
>   static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(void)
>   {
>   	/* We only support the Armada 370/XP/38x for now */
> @@ -1809,82 +1819,60 @@ fail_disable_clk:
>   	return ret;
>   }
>   
> -static int pxa3xx_nand_probe_dt(struct pxa3xx_nand_info *info)
> +static int pxa3xx_nand_probe_dt(struct udevice *dev, struct pxa3xx_nand_info *info)
>   {
>   	struct pxa3xx_nand_platform_data *pdata;
> -	const void *blob = gd->fdt_blob;
> -	int node = -1;
>   
>   	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
>   	if (!pdata)
>   		return -ENOMEM;
>   
> -	/* Get address decoding nodes from the FDT blob */
> -	do {
> -		node = fdt_node_offset_by_compatible(blob, node,
> -						     "marvell,mvebu-pxa3xx-nand");
> -		if (node < 0)
> -			break;
> -
> -		/* Bypass disabeld nodes */
> -		if (!fdtdec_get_is_enabled(blob, node))
> -			continue;
> -
> -		/* Get the first enabled NAND controler base address */
> -		info->mmio_base =
> -			(void __iomem *)fdtdec_get_addr_size_auto_noparent(
> -					blob, node, "reg", 0, NULL, true);
> +	info->mmio_base = dev_read_addr_ptr(dev);
>   
> -		pdata->num_cs = fdtdec_get_int(blob, node, "num-cs", 1);
> -		if (pdata->num_cs != 1) {
> -			pr_err("pxa3xx driver supports single CS only\n");
> -			break;
> -		}
> -
> -		if (fdtdec_get_bool(blob, node, "nand-enable-arbiter"))
> -			pdata->enable_arbiter = 1;
> +	pdata->num_cs = dev_read_u32_default(dev, "num-cs", 1);
> +	if (pdata->num_cs != 1) {
> +		pr_err("pxa3xx driver supports single CS only\n");
> +		return -EINVAL;
> +	}
>   
> -		if (fdtdec_get_bool(blob, node, "nand-keep-config"))
> -			pdata->keep_config = 1;
> +	if (dev_read_bool(dev, "nand-enable-arbiter"))
> +		pdata->enable_arbiter = 1;
>   
> -		/*
> -		 * ECC parameters.
> -		 * If these are not set, they will be selected according
> -		 * to the detected flash type.
> -		 */
> -		/* ECC strength */
> -		pdata->ecc_strength = fdtdec_get_int(blob, node,
> -						     "nand-ecc-strength", 0);
> +	if (dev_read_bool(dev, "nand-keep-config"))
> +		pdata->keep_config = 1;
>   
> -		/* ECC step size */
> -		pdata->ecc_step_size = fdtdec_get_int(blob, node,
> -						      "nand-ecc-step-size", 0);
> -
> -		info->pdata = pdata;
> +	/*
> +	 * ECC parameters.
> +	 * If these are not set, they will be selected according
> +	 * to the detected flash type.
> +	 */
> +	/* ECC strength */
> +	pdata->ecc_strength = dev_read_u32_default(dev, "nand-ecc-strength", 0);
>   
> -		/* Currently support only a single NAND controller */
> -		return 0;
> +	/* ECC step size */
> +	pdata->ecc_step_size = dev_read_u32_default(dev, "nand-ecc-step-size",
> +			0);
>   
> -	} while (node >= 0);
> +	info->pdata = pdata;
>   
> -	return -EINVAL;
> +	return 0;
>   }
>   
> -static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
> +static int pxa3xx_nand_probe(struct udevice *dev)
>   {
> -	struct mtd_info *mtd = &info->controller.active->mtd;
>   	struct pxa3xx_nand_platform_data *pdata;
>   	int ret, cs, probe_success;
> +	struct pxa3xx_nand_info *info = dev_get_priv(dev);
>   
> -	ret = pxa3xx_nand_probe_dt(info);
> +	ret = pxa3xx_nand_probe_dt(dev, info);
>   	if (ret)
>   		return ret;
>   
>   	pdata = info->pdata;
>   
> -	ret = alloc_nand_resource(info);
> +	ret = alloc_nand_resource(dev, info);
>   	if (ret) {
> -		dev_err(mtd->dev, "alloc nand resource failed\n");
> +		dev_err(dev, "alloc nand resource failed\n");
>   		return ret;
>   	}
>   
> @@ -1918,22 +1906,23 @@ static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
>   	return 0;
>   }
>   
> -/*
> - * Main initialization routine
> - */
> +U_BOOT_DRIVER(pxa3xx_nand) = {
> +	.name = "pxa3xx-nand",
> +	.id = UCLASS_MTD,
> +	.of_match = pxa3xx_nand_dt_ids,
> +	.probe = pxa3xx_nand_probe,
> +	.priv_auto_alloc_size = sizeof(struct pxa3xx_nand_info) +
> +		sizeof(struct pxa3xx_nand_host) * CONFIG_SYS_MAX_NAND_DEVICE,
> +};
> +
>   void board_nand_init(void)
>   {
> -	struct pxa3xx_nand_info *info;
> -	struct pxa3xx_nand_host *host;
> +	struct udevice *dev;
>   	int ret;
>   
> -	info = kzalloc(sizeof(*info) +
> -		       sizeof(*host) * CONFIG_SYS_MAX_NAND_DEVICE,
> -		       GFP_KERNEL);
> -	if (!info)
> -		return;
> -
> -	ret = pxa3xx_nand_probe(info);
> -	if (ret)
> -		return;
> +	ret = uclass_get_device_by_driver(UCLASS_MTD,
> +			DM_GET_DRIVER(pxa3xx_nand), &dev);
> +	if (ret && ret != -ENODEV)
> +		pr_err("Failed to initialize %s. (error %d)\n", dev->name,
> +			   ret);

Nitpicking: Use parenthesis for multi-line statements (even if its only
one line broken into 2 lines).

Thanks,
Stefan

[PATCH v2 4/5] mtd: pxa3xx_nand: remove dead code

[Baruch Siach]

The kfree() call is unreachable, and is not needed. Remove this call and
the fail_disable_clk label.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 drivers/mtd/nand/raw/pxa3xx_nand.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c
index 6f66db065357..635794b1691a 100644
--- a/drivers/mtd/nand/raw/pxa3xx_nand.c
+++ b/drivers/mtd/nand/raw/pxa3xx_nand.c
@@ -1768,7 +1768,7 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)
 	struct pxa3xx_nand_host *host;
 	struct nand_chip *chip = NULL;
 	struct mtd_info *mtd;
-	int ret, cs;
+	int cs;
 
 	pdata = info->pdata;
 	if (pdata->num_cs <= 0)
@@ -1804,19 +1804,13 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)
 	/* Allocate a buffer to allow flash detection */
 	info->buf_size = INIT_BUFFER_SIZE;
 	info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
-	if (info->data_buff == NULL) {
-		ret = -ENOMEM;
-		goto fail_disable_clk;
-	}
+	if (info->data_buff == NULL)
+		return -ENOMEM;
 
 	/* initialize all interrupts to be disabled */
 	disable_int(info, NDSR_MASK);
 
 	return 0;
-
-	kfree(info->data_buff);
-fail_disable_clk:
-	return ret;
 }
 
 static int pxa3xx_nand_probe_dt(struct udevice *dev, struct pxa3xx_nand_info *info)
-- 
2.28.0

[PATCH v2 4/5] mtd: pxa3xx_nand: remove dead code

[Stefan Roese]

On 18.10.20 14:56, Baruch Siach wrote:
> The kfree() call is unreachable, and is not needed. Remove this call and
> the fail_disable_clk label.
> 
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
>   drivers/mtd/nand/raw/pxa3xx_nand.c | 12 +++---------
>   1 file changed, 3 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c
> index 6f66db065357..635794b1691a 100644
> --- a/drivers/mtd/nand/raw/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/raw/pxa3xx_nand.c
> @@ -1768,7 +1768,7 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)
>   	struct pxa3xx_nand_host *host;
>   	struct nand_chip *chip = NULL;
>   	struct mtd_info *mtd;
> -	int ret, cs;
> +	int cs;
>   
>   	pdata = info->pdata;
>   	if (pdata->num_cs <= 0)
> @@ -1804,19 +1804,13 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)
>   	/* Allocate a buffer to allow flash detection */
>   	info->buf_size = INIT_BUFFER_SIZE;
>   	info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
> -	if (info->data_buff == NULL) {
> -		ret = -ENOMEM;
> -		goto fail_disable_clk;
> -	}
> +	if (info->data_buff == NULL)
> +		return -ENOMEM;
>   
>   	/* initialize all interrupts to be disabled */
>   	disable_int(info, NDSR_MASK);
>   
>   	return 0;
> -
> -	kfree(info->data_buff);
> -fail_disable_clk:
> -	return ret;
>   }
>   
>   static int pxa3xx_nand_probe_dt(struct udevice *dev, struct pxa3xx_nand_info *info)
> 


Viele Gr??e,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de

[PATCH v2 5/5] mtd: nand: pxa3xx: enable NAND controller if the SoC needs it

[Baruch Siach]

From: Shmuel Hazan <shmuel.h@siklu.com>

Based on Linux kernel commit fc256f5789cb ("mtd: nand: pxa3xx: enable
NAND controller if the SoC needs it"). This commit adds support for the
Armada 8040 nand controller.

The kernel commit says this:

    Marvell recent SoCs like A7k/A8k do not boot with NAND flash
    controller activated by default. Enabling the controller is a matter
    of writing in a system controller register that may also be used for
    other NAND related choices.

Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 drivers/mtd/nand/raw/pxa3xx_nand.c | 50 ++++++++++++++++++++++++------
 1 file changed, 41 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c
index 635794b1691a..beaa290f7480 100644
--- a/drivers/mtd/nand/raw/pxa3xx_nand.c
+++ b/drivers/mtd/nand/raw/pxa3xx_nand.c
@@ -22,6 +22,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/types.h>
+#include <syscon.h>
+#include <regmap.h>
 #include <dm/uclass.h>
 #include <dm/read.h>
 
@@ -119,6 +121,10 @@ DECLARE_GLOBAL_DATA_PTR;
 #define EXT_CMD_TYPE_LAST_RW	1 /* Last naked read/write */
 #define EXT_CMD_TYPE_MONO	0 /* Monolithic read/write */
 
+/* System control register and bit to enable NAND on some SoCs */
+#define GENCONF_SOC_DEVICE_MUX	0x208
+#define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0)
+
 /*
  * This should be large enough to read 'ONFI' and 'JEDEC'.
  * Let's use 7 bytes, which is the maximum ID count supported
@@ -159,6 +165,7 @@ enum {
 enum pxa3xx_nand_variant {
 	PXA3XX_NAND_VARIANT_PXA,
 	PXA3XX_NAND_VARIANT_ARMADA370,
+	PXA3XX_NAND_VARIANT_ARMADA_8K,
 };
 
 struct pxa3xx_nand_host {
@@ -424,13 +431,16 @@ static const struct udevice_id pxa3xx_nand_dt_ids[] = {
 		.compatible = "marvell,mvebu-pxa3xx-nand",
 		.data = PXA3XX_NAND_VARIANT_ARMADA370,
 	},
+	{
+		.compatible = "marvell,armada-8k-nand-controller",
+		.data = PXA3XX_NAND_VARIANT_ARMADA_8K,
+	},
 	{}
 };
 
-static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(void)
+static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(struct udevice *dev)
 {
-	/* We only support the Armada 370/XP/38x for now */
-	return PXA3XX_NAND_VARIANT_ARMADA370;
+	return dev_get_driver_data(dev);
 }
 
 static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
@@ -707,7 +717,8 @@ static irqreturn_t pxa3xx_nand_irq(struct pxa3xx_nand_info *info)
 		info->retcode = ERR_UNCORERR;
 	if (status & NDSR_CORERR) {
 		info->retcode = ERR_CORERR;
-		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
+		if ((info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+			 info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) &&
 		    info->ecc_bch)
 			info->ecc_err_cnt = NDSR_ERR_CNT(status);
 		else
@@ -762,7 +773,8 @@ static irqreturn_t pxa3xx_nand_irq(struct pxa3xx_nand_info *info)
 		nand_writel(info, NDCB0, info->ndcb2);
 
 		/* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
-		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+			info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
 			nand_writel(info, NDCB0, info->ndcb3);
 	}
 
@@ -1676,7 +1688,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 	}
 
 	/* Device detection must be done with ECC disabled */
-	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+		info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
 		nand_writel(info, NDECCCTRL, 0x0);
 
 	if (nand_scan_ident(mtd, 1, NULL))
@@ -1726,7 +1739,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 	 * (aka split) command handling,
 	 */
 	if (mtd->writesize > info->chunk_size) {
-		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) {
+		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
+			info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) {
 			chip->cmdfunc = nand_cmdfunc_extended;
 		} else {
 			dev_err(mtd->dev,
@@ -1762,7 +1776,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 	return nand_scan_tail(mtd);
 }
 
-static int alloc_nand_resource(struct pxa3xx_nand_info *info)
+static int alloc_nand_resource(struct udevice *dev, struct pxa3xx_nand_info *info)
 {
 	struct pxa3xx_nand_platform_data *pdata;
 	struct pxa3xx_nand_host *host;
@@ -1774,7 +1788,7 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)
 	if (pdata->num_cs <= 0)
 		return -ENODEV;
 
-	info->variant = pxa3xx_nand_get_variant();
+	info->variant = pxa3xx_nand_get_variant(dev);
 	for (cs = 0; cs < pdata->num_cs; cs++) {
 		chip = (struct nand_chip *)
 			((u8 *)&info[1] + sizeof(*host) * cs);
@@ -1810,6 +1824,24 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)
 	/* initialize all interrupts to be disabled */
 	disable_int(info, NDSR_MASK);
 
+	/*
+	 * Some SoCs like A7k/A8k need to enable manually the NAND
+	 * controller to avoid being bootloader dependent. This is done
+	 * through the use of a single bit in the System Functions registers.
+	 */
+	if (pxa3xx_nand_get_variant(dev) == PXA3XX_NAND_VARIANT_ARMADA_8K) {
+		struct regmap *sysctrl_base = syscon_regmap_lookup_by_phandle(
+				dev, "marvell,system-controller");
+		u32 reg;
+
+		if (IS_ERR(sysctrl_base))
+			return PTR_ERR(sysctrl_base);
+
+		regmap_read(sysctrl_base, GENCONF_SOC_DEVICE_MUX, &reg);
+		reg |= GENCONF_SOC_DEVICE_MUX_NFC_EN;
+		regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, reg);
+	}
+
 	return 0;
 }
 
-- 
2.28.0

[PATCH v2 5/5] mtd: nand: pxa3xx: enable NAND controller if the SoC needs it

[Stefan Roese]

On 18.10.20 14:56, Baruch Siach wrote:
> From: Shmuel Hazan <shmuel.h@siklu.com>
> 
> Based on Linux kernel commit fc256f5789cb ("mtd: nand: pxa3xx: enable
> NAND controller if the SoC needs it"). This commit adds support for the
> Armada 8040 nand controller.
> 
> The kernel commit says this:
> 
>      Marvell recent SoCs like A7k/A8k do not boot with NAND flash
>      controller activated by default. Enabling the controller is a matter
>      of writing in a system controller register that may also be used for
>      other NAND related choices.
> 
> Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
>   drivers/mtd/nand/raw/pxa3xx_nand.c | 50 ++++++++++++++++++++++++------
>   1 file changed, 41 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c
> index 635794b1691a..beaa290f7480 100644
> --- a/drivers/mtd/nand/raw/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/raw/pxa3xx_nand.c
> @@ -22,6 +22,8 @@
>   #include <linux/mtd/mtd.h>
>   #include <linux/mtd/rawnand.h>
>   #include <linux/types.h>
> +#include <syscon.h>
> +#include <regmap.h>
>   #include <dm/uclass.h>
>   #include <dm/read.h>
>   
> @@ -119,6 +121,10 @@ DECLARE_GLOBAL_DATA_PTR;
>   #define EXT_CMD_TYPE_LAST_RW	1 /* Last naked read/write */
>   #define EXT_CMD_TYPE_MONO	0 /* Monolithic read/write */
>   
> +/* System control register and bit to enable NAND on some SoCs */
> +#define GENCONF_SOC_DEVICE_MUX	0x208
> +#define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0)
> +
>   /*
>    * This should be large enough to read 'ONFI' and 'JEDEC'.
>    * Let's use 7 bytes, which is the maximum ID count supported
> @@ -159,6 +165,7 @@ enum {
>   enum pxa3xx_nand_variant {
>   	PXA3XX_NAND_VARIANT_PXA,
>   	PXA3XX_NAND_VARIANT_ARMADA370,
> +	PXA3XX_NAND_VARIANT_ARMADA_8K,
>   };
>   
>   struct pxa3xx_nand_host {
> @@ -424,13 +431,16 @@ static const struct udevice_id pxa3xx_nand_dt_ids[] = {
>   		.compatible = "marvell,mvebu-pxa3xx-nand",
>   		.data = PXA3XX_NAND_VARIANT_ARMADA370,
>   	},
> +	{
> +		.compatible = "marvell,armada-8k-nand-controller",
> +		.data = PXA3XX_NAND_VARIANT_ARMADA_8K,
> +	},
>   	{}
>   };
>   
> -static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(void)
> +static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(struct udevice *dev)
>   {
> -	/* We only support the Armada 370/XP/38x for now */
> -	return PXA3XX_NAND_VARIANT_ARMADA370;
> +	return dev_get_driver_data(dev);
>   }
>   
>   static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
> @@ -707,7 +717,8 @@ static irqreturn_t pxa3xx_nand_irq(struct pxa3xx_nand_info *info)
>   		info->retcode = ERR_UNCORERR;
>   	if (status & NDSR_CORERR) {
>   		info->retcode = ERR_CORERR;
> -		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
> +		if ((info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
> +			 info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) &&
>   		    info->ecc_bch)
>   			info->ecc_err_cnt = NDSR_ERR_CNT(status);
>   		else
> @@ -762,7 +773,8 @@ static irqreturn_t pxa3xx_nand_irq(struct pxa3xx_nand_info *info)
>   		nand_writel(info, NDCB0, info->ndcb2);
>   
>   		/* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
> -		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
> +		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
> +			info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
>   			nand_writel(info, NDCB0, info->ndcb3);
>   	}
>   
> @@ -1676,7 +1688,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>   	}
>   
>   	/* Device detection must be done with ECC disabled */
> -	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
> +	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
> +		info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
>   		nand_writel(info, NDECCCTRL, 0x0);
>   
>   	if (nand_scan_ident(mtd, 1, NULL))
> @@ -1726,7 +1739,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>   	 * (aka split) command handling,
>   	 */
>   	if (mtd->writesize > info->chunk_size) {
> -		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) {
> +		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
> +			info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) {
>   			chip->cmdfunc = nand_cmdfunc_extended;
>   		} else {
>   			dev_err(mtd->dev,
> @@ -1762,7 +1776,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>   	return nand_scan_tail(mtd);
>   }
>   
> -static int alloc_nand_resource(struct pxa3xx_nand_info *info)
> +static int alloc_nand_resource(struct udevice *dev, struct pxa3xx_nand_info *info)
>   {
>   	struct pxa3xx_nand_platform_data *pdata;
>   	struct pxa3xx_nand_host *host;
> @@ -1774,7 +1788,7 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)
>   	if (pdata->num_cs <= 0)
>   		return -ENODEV;
>   
> -	info->variant = pxa3xx_nand_get_variant();
> +	info->variant = pxa3xx_nand_get_variant(dev);
>   	for (cs = 0; cs < pdata->num_cs; cs++) {
>   		chip = (struct nand_chip *)
>   			((u8 *)&info[1] + sizeof(*host) * cs);
> @@ -1810,6 +1824,24 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)
>   	/* initialize all interrupts to be disabled */
>   	disable_int(info, NDSR_MASK);
>   
> +	/*
> +	 * Some SoCs like A7k/A8k need to enable manually the NAND
> +	 * controller to avoid being bootloader dependent. This is done
> +	 * through the use of a single bit in the System Functions registers.
> +	 */
> +	if (pxa3xx_nand_get_variant(dev) == PXA3XX_NAND_VARIANT_ARMADA_8K) {
> +		struct regmap *sysctrl_base = syscon_regmap_lookup_by_phandle(
> +				dev, "marvell,system-controller");
> +		u32 reg;
> +
> +		if (IS_ERR(sysctrl_base))
> +			return PTR_ERR(sysctrl_base);
> +
> +		regmap_read(sysctrl_base, GENCONF_SOC_DEVICE_MUX, &reg);
> +		reg |= GENCONF_SOC_DEVICE_MUX_NFC_EN;
> +		regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, reg);
> +	}
> +
>   	return 0;
>   }
>   
> 


Viele Gr??e,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de

[PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k

[Chris Packham]

Hi Baruch,

On Mon, Oct 19, 2020 at 1:59 AM Baruch Siach <baruch@tkos.co.il> wrote:
>
> This series adds NAND flash support to Aramda 8k systems. Patches make the
> necessary changes to the pxa3xx_nand driver and DT files.
>
> v2:
>   Rebase on current master. Fixes conflict with commit 661c98121d4 ("mtd: nand:
>   pxa3xx: Fix not calling dev_xxx with a device")
>

Is it worth looking at bringing in the newer marvell_nand driver from
Linux? I suspect that it will be easier to keep in sync with changes
for the Armada 8K. I have considered it in the past but it kind of
fell off my radar.

> Baruch Siach (2):
>   arm: dts: armada-cp110-master: update nand-controller
>   mtd: pxa3xx_nand: remove dead code
>
> Shmuel Hazan (3):
>   arm: dts: armada-cp110-slave: add missing cps_nand
>   mtd: pxa3xx_nand: port to use driver model
>   mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
>
>  arch/arm/dts/armada-cp110-master.dtsi |  15 ++-
>  arch/arm/dts/armada-cp110-slave.dtsi  |  16 +++
>  drivers/mtd/nand/raw/Kconfig          |   2 +
>  drivers/mtd/nand/raw/pxa3xx_nand.c    | 179 ++++++++++++++------------
>  4 files changed, 124 insertions(+), 88 deletions(-)
>
> --
> 2.28.0
>

[PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k

[Baruch Siach]

Hi Chris,

On Sun, Oct 18 2020, Chris Packham wrote:
> On Mon, Oct 19, 2020 at 1:59 AM Baruch Siach <baruch@tkos.co.il> wrote:
>>
>> This series adds NAND flash support to Aramda 8k systems. Patches make the
>> necessary changes to the pxa3xx_nand driver and DT files.
>>
>> v2:
>>   Rebase on current master. Fixes conflict with commit 661c98121d4 ("mtd: nand:
>>   pxa3xx: Fix not calling dev_xxx with a device")
>
> Is it worth looking at bringing in the newer marvell_nand driver from
> Linux? I suspect that it will be easier to keep in sync with changes
> for the Armada 8K. I have considered it in the past but it kind of
> fell off my radar.

The kernel raw nand API has seen some significant changes recently. It
looks like the kernel marvell_nand driver relies on newer API. I'm not
sure how easy would be syncing the drivers to a degree that makes
porting of changes trivial. It would probably require many other changes
in generic U-Boot raw NAND code.

Maybe Miquel can shed some light on that.

Unfortunately, the U-Boot MAINTAINERS NAND FLASH entry is marked
"Orphaned (Since 2018-07)".

baruch

>> Baruch Siach (2):
>>   arm: dts: armada-cp110-master: update nand-controller
>>   mtd: pxa3xx_nand: remove dead code
>>
>> Shmuel Hazan (3):
>>   arm: dts: armada-cp110-slave: add missing cps_nand
>>   mtd: pxa3xx_nand: port to use driver model
>>   mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
>>
>>  arch/arm/dts/armada-cp110-master.dtsi |  15 ++-
>>  arch/arm/dts/armada-cp110-slave.dtsi  |  16 +++
>>  drivers/mtd/nand/raw/Kconfig          |   2 +
>>  drivers/mtd/nand/raw/pxa3xx_nand.c    | 179 ++++++++++++++------------
>>  4 files changed, 124 insertions(+), 88 deletions(-)
>>
>> --
>> 2.28.0
>>


-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

[PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k

[Stefan Roese]

Hi Baruch,
Hi Chris,

On 19.10.20 07:24, Baruch Siach wrote:
> Hi Chris,
> 
> On Sun, Oct 18 2020, Chris Packham wrote:
>> On Mon, Oct 19, 2020 at 1:59 AM Baruch Siach <baruch@tkos.co.il> wrote:
>>>
>>> This series adds NAND flash support to Aramda 8k systems. Patches make the
>>> necessary changes to the pxa3xx_nand driver and DT files.
>>>
>>> v2:
>>>    Rebase on current master. Fixes conflict with commit 661c98121d4 ("mtd: nand:
>>>    pxa3xx: Fix not calling dev_xxx with a device")
>>
>> Is it worth looking at bringing in the newer marvell_nand driver from
>> Linux? I suspect that it will be easier to keep in sync with changes
>> for the Armada 8K. I have considered it in the past but it kind of
>> fell off my radar.
> 
> The kernel raw nand API has seen some significant changes recently. It
> looks like the kernel marvell_nand driver relies on newer API. I'm not
> sure how easy would be syncing the drivers to a degree that makes
> porting of changes trivial. It would probably require many other changes
> in generic U-Boot raw NAND code.

I agree that without a re-sync with a more recent Linux MTD (NAND) core
code, this task might prove complex and failure prone. And sync'ing the
MTD core is also a pretty complex task which needs to be done very
carefully, to not break any existing platforms. FWICT, nobody is working
on it right now and we can't wait for this to happen and stall the
development here. So from my point of view, I'm okay with updates to
the current PXA NAND driver. Testing of these patches on other platforms
would be very welcome though.

> Maybe Miquel can shed some light on that.
> 
> Unfortunately, the U-Boot MAINTAINERS NAND FLASH entry is marked
> "Orphaned (Since 2018-07)".

Yes, this is unfortunate. Volunteers are always welcome. ;)

Thanks,
Stefan

> baruch
> 
>>> Baruch Siach (2):
>>>    arm: dts: armada-cp110-master: update nand-controller
>>>    mtd: pxa3xx_nand: remove dead code
>>>
>>> Shmuel Hazan (3):
>>>    arm: dts: armada-cp110-slave: add missing cps_nand
>>>    mtd: pxa3xx_nand: port to use driver model
>>>    mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
>>>
>>>   arch/arm/dts/armada-cp110-master.dtsi |  15 ++-
>>>   arch/arm/dts/armada-cp110-slave.dtsi  |  16 +++
>>>   drivers/mtd/nand/raw/Kconfig          |   2 +
>>>   drivers/mtd/nand/raw/pxa3xx_nand.c    | 179 ++++++++++++++------------
>>>   4 files changed, 124 insertions(+), 88 deletions(-)
>>>
>>> --
>>> 2.28.0
>>>
> 
> 


Viele Gr??e,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de

[PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k

[Baruch Siach]

Hi Stefan,

On Tue, Oct 20 2020, Stefan Roese wrote:
> On 19.10.20 07:24, Baruch Siach wrote:
>> On Sun, Oct 18 2020, Chris Packham wrote:
>>> On Mon, Oct 19, 2020 at 1:59 AM Baruch Siach <baruch@tkos.co.il> wrote:
>>>>
>>>> This series adds NAND flash support to Aramda 8k systems. Patches make the
>>>> necessary changes to the pxa3xx_nand driver and DT files.
>>>>
>>>> v2:
>>>>    Rebase on current master. Fixes conflict with commit 661c98121d4 ("mtd: nand:
>>>>    pxa3xx: Fix not calling dev_xxx with a device")
>>>
>>> Is it worth looking at bringing in the newer marvell_nand driver from
>>> Linux? I suspect that it will be easier to keep in sync with changes
>>> for the Armada 8K. I have considered it in the past but it kind of
>>> fell off my radar.
>>
>> The kernel raw nand API has seen some significant changes recently. It
>> looks like the kernel marvell_nand driver relies on newer API. I'm not
>> sure how easy would be syncing the drivers to a degree that makes
>> porting of changes trivial. It would probably require many other changes
>> in generic U-Boot raw NAND code.
>
> I agree that without a re-sync with a more recent Linux MTD (NAND) core
> code, this task might prove complex and failure prone. And sync'ing the
> MTD core is also a pretty complex task which needs to be done very
> carefully, to not break any existing platforms. FWICT, nobody is working
> on it right now and we can't wait for this to happen and stall the
> development here. So from my point of view, I'm okay with updates to
> the current PXA NAND driver. Testing of these patches on other platforms
> would be very welcome though.

I should note that the same driver with these modifications was tested
successfully on Armada 385 systems with NAND flash and UBIFS.

Thanks,
baruch

>> Maybe Miquel can shed some light on that.
>>
>> Unfortunately, the U-Boot MAINTAINERS NAND FLASH entry is marked
>> "Orphaned (Since 2018-07)".
>
> Yes, this is unfortunate. Volunteers are always welcome. ;)
>
> Thanks,
> Stefan
>
>> baruch
>>
>>>> Baruch Siach (2):
>>>>    arm: dts: armada-cp110-master: update nand-controller
>>>>    mtd: pxa3xx_nand: remove dead code
>>>>
>>>> Shmuel Hazan (3):
>>>>    arm: dts: armada-cp110-slave: add missing cps_nand
>>>>    mtd: pxa3xx_nand: port to use driver model
>>>>    mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
>>>>
>>>>   arch/arm/dts/armada-cp110-master.dtsi |  15 ++-
>>>>   arch/arm/dts/armada-cp110-slave.dtsi  |  16 +++
>>>>   drivers/mtd/nand/raw/Kconfig          |   2 +
>>>>   drivers/mtd/nand/raw/pxa3xx_nand.c    | 179 ++++++++++++++------------
>>>>   4 files changed, 124 insertions(+), 88 deletions(-)

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

[PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k

[Miquel Raynal]

Hi Stefan,

Stefan Roese <sr@denx.de> wrote on Tue, 20 Oct 2020 10:29:52 +0200:

> Hi Baruch,
> Hi Chris,
> 
> On 19.10.20 07:24, Baruch Siach wrote:
> > Hi Chris,
> > 
> > On Sun, Oct 18 2020, Chris Packham wrote:  
> >> On Mon, Oct 19, 2020 at 1:59 AM Baruch Siach <baruch@tkos.co.il> wrote:  
> >>>
> >>> This series adds NAND flash support to Aramda 8k systems. Patches make the
> >>> necessary changes to the pxa3xx_nand driver and DT files.
> >>>
> >>> v2:
> >>>    Rebase on current master. Fixes conflict with commit 661c98121d4 ("mtd: nand:
> >>>    pxa3xx: Fix not calling dev_xxx with a device")  
> >>
> >> Is it worth looking at bringing in the newer marvell_nand driver from
> >> Linux? I suspect that it will be easier to keep in sync with changes
> >> for the Armada 8K. I have considered it in the past but it kind of
> >> fell off my radar.  
> > 
> > The kernel raw nand API has seen some significant changes recently. It
> > looks like the kernel marvell_nand driver relies on newer API. I'm not
> > sure how easy would be syncing the drivers to a degree that makes
> > porting of changes trivial. It would probably require many other changes
> > in generic U-Boot raw NAND code.  
> 
> I agree that without a re-sync with a more recent Linux MTD (NAND) core
> code, this task might prove complex and failure prone. And sync'ing the
> MTD core is also a pretty complex task which needs to be done very
> carefully, to not break any existing platforms. FWICT, nobody is working
> on it right now and we can't wait for this to happen and stall the
> development here. So from my point of view, I'm okay with updates to
> the current PXA NAND driver. Testing of these patches on other platforms
> would be very welcome though.
> 
> > Maybe Miquel can shed some light on that.

Yes, the "new" marvell_nand.c driver is using the ->exec_op() interface
which is the one that must be ported to U-Boot. Many changes have been
brought to the raw NAND core but everything has been carefully patched
to be easily ported (besides the huge number of potential
dependencies that have not been brought to U-Boot already). Bringing-in 
this new interface does not affect the other controller drivers though,
as the ->cmdfunc() and ->cmd_ctrl() interfaces are still functional.

Thanks,
Miqu?l