From: Camelia Groza <camelia.groza@oss.nxp.com>
To: wd@denx.de, Shengzhou.Liu@nxp.com, priyanka.jain@nxp.com,
Zhiqiang.Hou@nxp.com, u-boot@lists.denx.de
Cc: Camelia Groza <camelia.groza@nxp.com>
Subject: [PATCH 0/4] board: freescale: add T2080RDB rev D support
Date: Thu, 10 Jun 2021 15:39:35 +0300 [thread overview]
Message-ID: <cover.1623327658.git.camelia.groza@nxp.com> (raw)
From: Camelia Groza <camelia.groza@nxp.com>
The T2080RDB boards revision D and up have updated Aquantia PHYs on the
two 10Gbps copper ports connected to MAC1 and MAC2 (from AQ1202 to
AQR113C). The second PHY connected to MAC2 is located at a different
address on the MDIO bus compared to revision C boards. Device tree
fixups are required for both Linux and u-boot to set the correct PHY
address for the new board revisions.
The first patch in the series implements a callback that detects the
board revision based on the CPLD registers.
The second patch updates the PHY addresses in u-boot for the legacy,
non-DM, driver implementation.
The third patch adds a fixup for Linux's device tree that is called from
both DM and non-DM code paths.
The last patch corrects u-boot's device tree under DM based on a newly
introduced CONFIG_T2080RDB_REV_D build option. We are unable to use the
board_fix_fdt callback to update the device tree before relocation because
the dts is stored in flash at that point and isn't writable. Instead,
the config option is used until a more robust solution is implemented.
Defconfig targets with the config option enabled by default are added for
convenience.
Camelia Groza (4):
board: freescale: t208xrdb: detect the board revision letter
board: freescale: t208xrdb: add rev D support for the non-DM_ETH mode
board: freescale: t208xrdb: add Linux fdt fixups for rev D
board: freescale: t208xrdb: add a config option for rev D dts fixups
arch/powerpc/dts/t2080rdb.dts | 7 ++
board/freescale/t208xrdb/Kconfig | 4 +
board/freescale/t208xrdb/eth_t208xrdb.c | 49 ++++++++++++-
board/freescale/t208xrdb/t208xrdb.c | 20 ++++-
board/freescale/t208xrdb/t208xrdb.h | 1 +
configs/T2080RDB_revD_NAND_defconfig | 93 ++++++++++++++++++++++++
configs/T2080RDB_revD_SDCARD_defconfig | 90 +++++++++++++++++++++++
configs/T2080RDB_revD_SPIFLASH_defconfig | 92 +++++++++++++++++++++++
configs/T2080RDB_revD_defconfig | 77 ++++++++++++++++++++
include/configs/T208xRDB.h | 8 +-
10 files changed, 434 insertions(+), 7 deletions(-)
create mode 100644 configs/T2080RDB_revD_NAND_defconfig
create mode 100644 configs/T2080RDB_revD_SDCARD_defconfig
create mode 100644 configs/T2080RDB_revD_SPIFLASH_defconfig
create mode 100644 configs/T2080RDB_revD_defconfig
--
2.17.1
next reply other threads:[~2021-06-10 12:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 12:39 Camelia Groza [this message]
2021-06-10 12:39 ` [PATCH 1/4] board: freescale: t208xrdb: detect the board revision letter Camelia Groza
2021-06-10 12:39 ` [PATCH 2/4] board: freescale: t208xrdb: add rev D support for the non-DM_ETH mode Camelia Groza
2021-06-10 12:39 ` [PATCH 3/4] board: freescale: t208xrdb: add Linux fdt fixups for rev D Camelia Groza
2021-06-10 12:39 ` [PATCH 4/4] board: freescale: t208xrdb: add a config option for rev D dts fixups Camelia Groza
2021-06-10 19:19 ` [PATCH 0/4] board: freescale: add T2080RDB rev D support Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1623327658.git.camelia.groza@nxp.com \
--to=camelia.groza@oss.nxp.com \
--cc=Shengzhou.Liu@nxp.com \
--cc=Zhiqiang.Hou@nxp.com \
--cc=camelia.groza@nxp.com \
--cc=priyanka.jain@nxp.com \
--cc=u-boot@lists.denx.de \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox