[PATCH 0/6] arm64: zynqmp: Update SOM boards

[Michal Simek <michal.simek@xilinx.com>]

Hi,

kv-g boards have been moved to new model where u-boot configures a lot of
things at run time which requires updates in DTs especially in connection
to enabling clocks for these platforms.
There are also small adjustment to match the latest state.

Thanks,
Michal


Michal Simek (6):
  arm64: zynqmp: Move usb hub from i2c to usb node
  arm64: zynqmp: Setup clock for DP and DPDMA
  arm64: zynqmp: Use assigned-clock-rates for setting up clock in SOM
  arm64: zynqmp: Switch to ethernet-phy-id in kv260
  arm64: zynqmp: Enable DP driver for SOMs
  arm64: zynqmp: Fix level of gpio reset for usb on kv260 boards

 arch/arm/dts/zynqmp-clk-ccf.dtsi      |  8 ++++++++
 arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 12 +++++++++---
 arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 26 ++++++++++++++++++--------
 arch/arm/dts/zynqmp-sm-k26-revA.dts   |  5 +++++
 4 files changed, 40 insertions(+), 11 deletions(-)

-- 
2.35.1