From: Jan Kiszka <jan.kiszka@siemens.com>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: chao zeng <chao.zeng@siemens.com>, Su Baocheng <baocheng.su@siemens.com>
Subject: [PATCH V6 00/13] IOT2050-related enhancements
Date: Sat, 4 Feb 2023 10:04:54 +0100 [thread overview]
Message-ID: <cover.1675501507.git.jan.kiszka@siemens.com> (raw)
(Almost) flushing our upstream queue for the IOT2050 device, this mostly
brings board-specific changes such as:
- updated build process and firmware layout for PG1 vs. PG2 devices
- more watchdog preparations
- preparations for verified boot on IOT2050 Advanced devices
This series depends on
https://lore.kernel.org/u-boot/cover.1675426972.git.jan.kiszka@siemens.com/
("env: Enhancements for establishing variable protection")
Changes in v6:
- fixed CFG_ENV_FLAGS_LIST_STATIC setup
- migrated to board env file
- cleaned up #ifdef in "Optionally embed OTP programming data into image"
- rebased over latest master
Changes in v5:
- factored out two patches
Changes in v4:
- rebased over latest master
- make use of new CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN
Changes in v3:
- further reworked patch 1 to load default env directly, leaving driver
ordering alone
Changes in v2:
- rebased over latest master
- reworked patch 1 to be less invasive to the code
- added "iot2050: use the named gpio to control the user-button"
Still in our backlog is support for a new variant that comes with M.2
slots. Related DT patches were sent to the kernel and are under review
now.
Jan
CC: chao zeng <chao.zeng@siemens.com>
CC: Su Baocheng <baocheng.su@siemens.com>
Jan Kiszka (10):
iot2050: Update firmware layout
iot2050: Migrate settings into board env file
iot2050: Add watchdog start to bootcmd
iot2050: Add CFG_ENV_FLAGS_LIST_STATIC
arm: dts: iot2050: Allow verifying U-Boot proper by SPL
tools: Add script for converting public key into device tree include
iot2050: Add script for signing artifacts
arm: dts: iot2050: Optionally embed OTP programming data into image
doc: iot2050: Add a note about the watchdog firmware
iot2050: Refresh defconfigs and activate
CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN
Su Baocheng (2):
board: siemens: iot2050: Split the build for PG1 and PG2
arm: dts: iot2050: Use the auto generator nodes for fdt
chao zeng (1):
board: siemens: iot2050: use the named gpio to control the user-button
arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 133 ++++++------------
board/siemens/iot2050/Kconfig | 35 ++++-
board/siemens/iot2050/board.c | 17 +--
board/siemens/iot2050/iot2050.env | 17 +++
...ot2050_defconfig => iot2050_pg1_defconfig} | 13 +-
...ot2050_defconfig => iot2050_pg2_defconfig} | 15 +-
doc/board/siemens/iot2050.rst | 79 ++++++++++-
include/configs/iot2050.h | 18 +--
tools/binman/missing-blob-help | 14 +-
tools/iot2050-sign-fw.sh | 51 +++++++
tools/key2dtsi.py | 64 +++++++++
11 files changed, 318 insertions(+), 138 deletions(-)
create mode 100644 board/siemens/iot2050/iot2050.env
copy configs/{iot2050_defconfig => iot2050_pg1_defconfig} (93%)
rename configs/{iot2050_defconfig => iot2050_pg2_defconfig} (91%)
create mode 100755 tools/iot2050-sign-fw.sh
create mode 100755 tools/key2dtsi.py
--
2.35.3
next reply other threads:[~2023-02-04 9:05 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-04 9:04 Jan Kiszka [this message]
2023-02-04 9:04 ` [PATCH V6 01/13] board: siemens: iot2050: Split the build for PG1 and PG2 Jan Kiszka
2023-02-04 9:04 ` [PATCH V6 02/13] arm: dts: iot2050: Use the auto generator nodes for fdt Jan Kiszka
2023-02-04 22:23 ` Simon Glass
2023-02-04 9:04 ` [PATCH V6 03/13] iot2050: Update firmware layout Jan Kiszka
2023-02-04 9:04 ` [PATCH V6 04/13] iot2050: Migrate settings into board env file Jan Kiszka
2023-02-04 9:04 ` [PATCH V6 05/13] iot2050: Add watchdog start to bootcmd Jan Kiszka
2023-02-04 9:05 ` [PATCH V6 06/13] iot2050: Add CFG_ENV_FLAGS_LIST_STATIC Jan Kiszka
2023-02-04 9:05 ` [PATCH V6 07/13] arm: dts: iot2050: Allow verifying U-Boot proper by SPL Jan Kiszka
2023-02-04 9:05 ` [PATCH V6 08/13] tools: Add script for converting public key into device tree include Jan Kiszka
2023-02-04 9:05 ` [PATCH V6 09/13] iot2050: Add script for signing artifacts Jan Kiszka
2023-02-04 9:05 ` [PATCH V6 10/13] arm: dts: iot2050: Optionally embed OTP programming data into image Jan Kiszka
2023-02-04 9:05 ` [PATCH V6 11/13] doc: iot2050: Add a note about the watchdog firmware Jan Kiszka
2023-02-04 9:05 ` [PATCH V6 12/13] board: siemens: iot2050: use the named gpio to control the user-button Jan Kiszka
2023-02-04 9:05 ` [PATCH V6 13/13] iot2050: Refresh defconfigs and activate CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1675501507.git.jan.kiszka@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=baocheng.su@siemens.com \
--cc=chao.zeng@siemens.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox