[PATCH v4 00/14] sc5xx Environment Cleanup and Fixes

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

* [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes
@ 2026-04-10 13:57 Caleb Ethridge
  2026-04-10 13:57 ` [PATCH v4 01/14] configs: sc5xx: Do not store environment in SPI flash Caleb Ethridge
                   ` (13 more replies)
  0 siblings, 14 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:57 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge, Caleb Ethridge

This series performs a general cleanup of the default U-boot environment
for sc5xx boards, stemming from the decision to no longer store the
environment in the SPI flash. The environments for each board have been
edited to contain the minimum number of commands needed for all supported
boot modes to avoid confusion, and the default boot command synced to spi
for all boards that support it. The filesystem for the SPI flash has also
been changed from jffs2 to ubifs.

A bug with the Ethernet reset line on the sc594 has been fixed, and the
sc573 has been renamed from the EZKIT to the EZLITE to match the name of the
publically available board. EZKIT was only used internally before release.
Preliminary binman support for sc5xx boards has been removed as it was unused
and full support never added.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>

---
Changes in v4:
- Added commit with default values for fdt_addr_r, kernel_addr_r, and initrd_addr
---

Caleb Ethridge (13):
  configs: sc5xx: Do not store environment in SPI flash
  mach-sc5xx: Remove update commands from default environment
  mach-sc5xx: Update boot commands
  mach-sc5xx: Switch from tftp to wget
  mach-sc5xx: Add USB boot command
  mach-sc5xx: Remove preliminary binman support
  dts: sc594: Fix gige-reset line on EZKIT
  mach-sc5xx: sc573: Rename EZKIT board to EZLITE
  mach-sc5xx: Update image load address
  mach-sc5xx: Update SPI bootargs for ubifs
  configs: sc5xx: Set default bootcmd to SPI boot
  arm: sc5xx: Remove SC5XX_LOADADDR
  arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and initrd_addr

Ozan Durgut (1):
  arm: sc5xx: add missing boot env selectors

 arch/arm/dts/Makefile                         |  2 +-
 .../dts/{sc573-ezkit.dts => sc573-ezlite.dts} |  4 +-
 arch/arm/dts/sc594-som-ezkit.dts              |  2 +-
 arch/arm/dts/sc5xx.dtsi                       | 41 --------
 arch/arm/mach-sc5xx/Kconfig                   | 47 +--------
 arch/arm/mach-sc5xx/init/dmcinit.c            |  2 +-
 board/adi/sc573-ezkit/sc573-ezkit.env         | 17 ----
 .../adi/{sc573-ezkit => sc573-ezlite}/Kconfig |  8 +-
 .../{sc573-ezkit => sc573-ezlite}/Makefile    |  2 +-
 .../sc573-ezlite.c}                           |  0
 board/adi/sc573-ezlite/sc573-ezlite.env       | 16 +++
 board/adi/sc584-ezkit/sc584-ezkit.env         |  8 +-
 board/adi/sc589-ezkit/sc589-ezkit.env         |  9 +-
 board/adi/sc589-mini/sc589-mini.env           |  9 +-
 board/adi/sc594-som-ezkit/sc594-som-ezkit.env |  9 +-
 .../adi/sc594-som-ezlite/sc594-som-ezlite.env |  8 +-
 board/adi/sc598-som-ezkit/sc598-som-ezkit.env |  9 +-
 .../adi/sc598-som-ezlite/sc598-som-ezlite.env | 14 ++-
 ...ezkit_defconfig => sc573-ezlite_defconfig} | 12 +--
 configs/sc584-ezkit_defconfig                 | 10 +-
 configs/sc589-ezkit_defconfig                 | 12 +--
 configs/sc589-mini_defconfig                  | 12 +--
 configs/sc594-som-ezkit-spl_defconfig         |  7 +-
 configs/sc594-som-ezlite-spl_defconfig        |  7 +-
 configs/sc598-som-ezkit-spl_defconfig         |  5 +-
 configs/sc598-som-ezlite-spl_defconfig        |  5 +-
 .../arm/adi/adi,sc5xx.yaml                    |  2 +-
 .../configs/{sc573-ezkit.h => sc573-ezlite.h} |  4 +-
 include/env/adi/adi_boot.env                  | 98 ++++++-------------
 29 files changed, 106 insertions(+), 275 deletions(-)
 rename arch/arm/dts/{sc573-ezkit.dts => sc573-ezlite.dts} (98%)
 delete mode 100644 board/adi/sc573-ezkit/sc573-ezkit.env
 rename board/adi/{sc573-ezkit => sc573-ezlite}/Kconfig (92%)
 rename board/adi/{sc573-ezkit => sc573-ezlite}/Makefile (79%)
 rename board/adi/{sc573-ezkit/sc573-ezkit.c => sc573-ezlite/sc573-ezlite.c} (100%)
 create mode 100644 board/adi/sc573-ezlite/sc573-ezlite.env
 rename configs/{sc573-ezkit_defconfig => sc573-ezlite_defconfig} (86%)
 rename include/configs/{sc573-ezkit.h => sc573-ezlite.h} (79%)

-- 
2.34.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v4 01/14] configs: sc5xx: Do not store environment in SPI flash
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
@ 2026-04-10 13:57 ` Caleb Ethridge
  2026-04-10 13:57 ` [PATCH v4 02/14] mach-sc5xx: Remove update commands from default environment Caleb Ethridge
                   ` (12 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:57 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Remove config option enabling storage of the environment
in the SPI flash, to match shift of programming boot media
to Linux.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 configs/sc573-ezkit_defconfig          | 4 ----
 configs/sc584-ezkit_defconfig          | 5 -----
 configs/sc589-ezkit_defconfig          | 5 -----
 configs/sc589-mini_defconfig           | 5 -----
 configs/sc594-som-ezkit-spl_defconfig  | 4 ----
 configs/sc594-som-ezlite-spl_defconfig | 4 ----
 configs/sc598-som-ezkit-spl_defconfig  | 4 ----
 configs/sc598-som-ezlite-spl_defconfig | 4 ----
 8 files changed, 35 deletions(-)

diff --git a/configs/sc573-ezkit_defconfig b/configs/sc573-ezkit_defconfig
index fc4ce13cc70..976d8e0306a 100644
--- a/configs/sc573-ezkit_defconfig
+++ b/configs/sc573-ezkit_defconfig
@@ -3,9 +3,6 @@ CONFIG_SYS_ARM_CACHE_WRITETHROUGH=y
 CONFIG_ARCH_SC5XX=y
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0xD0000
-CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
 CONFIG_SPL_SERIAL=y
@@ -52,7 +49,6 @@ CONFIG_CMD_FS_GENERIC=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_HOSTNAME=y
 CONFIG_HOSTNAME="sc573-ezkit"
 CONFIG_NET_RETRY_COUNT=20
diff --git a/configs/sc584-ezkit_defconfig b/configs/sc584-ezkit_defconfig
index a8c6b9f1224..27f55804199 100644
--- a/configs/sc584-ezkit_defconfig
+++ b/configs/sc584-ezkit_defconfig
@@ -3,9 +3,6 @@ CONFIG_SYS_ARM_CACHE_WRITETHROUGH=y
 CONFIG_ARCH_SC5XX=y
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0xD0000
-CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL_SERIAL=y
@@ -57,8 +54,6 @@ CONFIG_CMD_FS_GENERIC=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_SPI_MAX_HZ=10000000
 CONFIG_USE_HOSTNAME=y
 CONFIG_HOSTNAME="sc584-ezkit"
 CONFIG_NET_RETRY_COUNT=20
diff --git a/configs/sc589-ezkit_defconfig b/configs/sc589-ezkit_defconfig
index 9cd204e40ab..180b6904d95 100644
--- a/configs/sc589-ezkit_defconfig
+++ b/configs/sc589-ezkit_defconfig
@@ -5,9 +5,6 @@ CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xC203F000
 CONFIG_SF_DEFAULT_SPEED=1000000
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0xD0000
-CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL_SERIAL=y
@@ -61,8 +58,6 @@ CONFIG_CMD_FS_GENERIC=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_SPI_MAX_HZ=10000000
 CONFIG_USE_HOSTNAME=y
 CONFIG_HOSTNAME="sc589-ezkit"
 CONFIG_NET_RETRY_COUNT=20
diff --git a/configs/sc589-mini_defconfig b/configs/sc589-mini_defconfig
index 0908ab1708b..92c2741f701 100644
--- a/configs/sc589-mini_defconfig
+++ b/configs/sc589-mini_defconfig
@@ -4,9 +4,6 @@ CONFIG_ARCH_SC5XX=y
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xC203F000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_OFFSET=0xD0000
-CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL_SERIAL=y
@@ -58,8 +55,6 @@ CONFIG_CMD_FS_GENERIC=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_SPI_MAX_HZ=10000000
 CONFIG_USE_HOSTNAME=y
 CONFIG_HOSTNAME="sc589-mini"
 CONFIG_NET_RETRY_COUNT=20
diff --git a/configs/sc594-som-ezkit-spl_defconfig b/configs/sc594-som-ezkit-spl_defconfig
index c62097a2ac9..c379de2c146 100644
--- a/configs/sc594-som-ezkit-spl_defconfig
+++ b/configs/sc594-som-ezkit-spl_defconfig
@@ -4,9 +4,6 @@ CONFIG_ARCH_SC5XX=y
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8203f000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
@@ -40,7 +37,6 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_HOSTNAME=y
 CONFIG_HOSTNAME="sc594-som-ezkit"
 CONFIG_NET_RETRY_COUNT=20
diff --git a/configs/sc594-som-ezlite-spl_defconfig b/configs/sc594-som-ezlite-spl_defconfig
index 39481351102..54b26ed85c2 100644
--- a/configs/sc594-som-ezlite-spl_defconfig
+++ b/configs/sc594-som-ezlite-spl_defconfig
@@ -3,9 +3,6 @@ CONFIG_SYS_ARM_CACHE_WRITETHROUGH=y
 CONFIG_ARCH_SC5XX=y
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
@@ -45,7 +42,6 @@ CONFIG_CMD_FAT=y
 # CONFIG_DOS_PARTITION is not set
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_HOSTNAME=y
 CONFIG_HOSTNAME="sc594-som-ezlite"
 CONFIG_NET_RETRY_COUNT=20
diff --git a/configs/sc598-som-ezkit-spl_defconfig b/configs/sc598-som-ezkit-spl_defconfig
index ad3a6fcc236..7027a7f8a2a 100644
--- a/configs/sc598-som-ezkit-spl_defconfig
+++ b/configs/sc598-som-ezkit-spl_defconfig
@@ -4,9 +4,6 @@ CONFIG_COUNTER_FREQUENCY=31250000
 CONFIG_ARCH_SC5XX=y
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
@@ -63,7 +60,6 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_HOSTNAME=y
 CONFIG_HOSTNAME="sc598-som-ezkit"
 CONFIG_NET_RETRY_COUNT=20
diff --git a/configs/sc598-som-ezlite-spl_defconfig b/configs/sc598-som-ezlite-spl_defconfig
index 34dbedf12b4..0b59b36f264 100644
--- a/configs/sc598-som-ezlite-spl_defconfig
+++ b/configs/sc598-som-ezlite-spl_defconfig
@@ -4,9 +4,6 @@ CONFIG_COUNTER_FREQUENCY=31250000
 CONFIG_ARCH_SC5XX=y
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
@@ -62,7 +59,6 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_HOSTNAME=y
 CONFIG_HOSTNAME="sc598-som-ezlite"
 CONFIG_NET_RETRY_COUNT=20
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 02/14] mach-sc5xx: Remove update commands from default environment
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
  2026-04-10 13:57 ` [PATCH v4 01/14] configs: sc5xx: Do not store environment in SPI flash Caleb Ethridge
@ 2026-04-10 13:57 ` Caleb Ethridge
  2026-04-10 13:57 ` [PATCH v4 03/14] mach-sc5xx: Update boot commands Caleb Ethridge
                   ` (11 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:57 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Remove the update_spi family of commands from the U-boot
environment. These commands are not standard in U-boot,
and boot media programming has moved to Linux, so the
commands can be safely removed.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 board/adi/sc573-ezkit/sc573-ezkit.env         |  2 -
 board/adi/sc584-ezkit/sc584-ezkit.env         |  2 -
 board/adi/sc589-ezkit/sc589-ezkit.env         |  2 -
 board/adi/sc589-mini/sc589-mini.env           |  2 -
 board/adi/sc594-som-ezkit/sc594-som-ezkit.env |  2 -
 .../adi/sc594-som-ezlite/sc594-som-ezlite.env |  2 -
 board/adi/sc598-som-ezkit/sc598-som-ezkit.env |  2 -
 .../adi/sc598-som-ezlite/sc598-som-ezlite.env |  2 -
 configs/sc573-ezkit_defconfig                 |  3 --
 configs/sc584-ezkit_defconfig                 |  2 -
 configs/sc589-ezkit_defconfig                 |  2 -
 configs/sc589-mini_defconfig                  |  2 -
 include/env/adi/adi_boot.env                  | 53 -------------------
 13 files changed, 78 deletions(-)

diff --git a/board/adi/sc573-ezkit/sc573-ezkit.env b/board/adi/sc573-ezkit/sc573-ezkit.env
index 8b03a3d5da9..c8781aaad82 100644
--- a/board/adi/sc573-ezkit/sc573-ezkit.env
+++ b/board/adi/sc573-ezkit/sc573-ezkit.env
@@ -3,9 +3,7 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
 adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
-adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc573-ezkit.jffs2
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc584-ezkit/sc584-ezkit.env b/board/adi/sc584-ezkit/sc584-ezkit.env
index 8a6f7edd5e8..2a76c005d1c 100644
--- a/board/adi/sc584-ezkit/sc584-ezkit.env
+++ b/board/adi/sc584-ezkit/sc584-ezkit.env
@@ -3,9 +3,7 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
 adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
-adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc584-ezkit.jffs2
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.env b/board/adi/sc589-ezkit/sc589-ezkit.env
index b8206e85179..8eaa776cc6e 100644
--- a/board/adi/sc589-ezkit/sc589-ezkit.env
+++ b/board/adi/sc589-ezkit/sc589-ezkit.env
@@ -3,9 +3,7 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
 adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
-adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-ezkit.jffs2
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc589-mini/sc589-mini.env b/board/adi/sc589-mini/sc589-mini.env
index f7628b0b335..a7addcd3957 100644
--- a/board/adi/sc589-mini/sc589-mini.env
+++ b/board/adi/sc589-mini/sc589-mini.env
@@ -3,9 +3,7 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
 adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
-adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-mini.jffs2
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
index 069edc717da..85fa8c8d49c 100644
--- a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
+++ b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
@@ -3,9 +3,7 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
 adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
-adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezkit.jffs2
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
index e5382b67c81..f2ee8d06801 100644
--- a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
+++ b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
@@ -3,9 +3,7 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
 adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
-adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezlite.jffs2
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
index 2cb475e1001..080afaef406 100644
--- a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
+++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
@@ -3,9 +3,7 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
 adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
-adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezkit.jffs2
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
index 1d9ea6d188b..a3486de503e 100644
--- a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
+++ b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
@@ -3,9 +3,7 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
 adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
-adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
 loadaddr=CONFIG_SC5XX_LOADADDR
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezlite.jffs2
 
diff --git a/configs/sc573-ezkit_defconfig b/configs/sc573-ezkit_defconfig
index 976d8e0306a..a58e74d3a45 100644
--- a/configs/sc573-ezkit_defconfig
+++ b/configs/sc573-ezkit_defconfig
@@ -5,10 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
-CONFIG_SPL_SERIAL=y
-CONFIG_SC5XX_UBOOT_OFFSET=0x20000
 CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
-CONFIG_SC5XX_ROOTFS_OFFSET=0x6E0000
 CONFIG_SC5XX_LOADADDR=0x83000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_CGU0_CLKOUTSEL=7
diff --git a/configs/sc584-ezkit_defconfig b/configs/sc584-ezkit_defconfig
index 27f55804199..7975a610ca3 100644
--- a/configs/sc584-ezkit_defconfig
+++ b/configs/sc584-ezkit_defconfig
@@ -10,9 +10,7 @@ CONFIG_SPL_STACK=0x200C0000
 CONFIG_SPL_BSS_START_ADDR=0x200A0000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SC58X=y
-CONFIG_SC5XX_UBOOT_OFFSET=0x20000
 CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
-CONFIG_SC5XX_ROOTFS_OFFSET=0x6E0000
 CONFIG_SC5XX_LOADADDR=0x89300000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_ADI_BUG_EZKHW21=y
diff --git a/configs/sc589-ezkit_defconfig b/configs/sc589-ezkit_defconfig
index 180b6904d95..0ceb57f1f42 100644
--- a/configs/sc589-ezkit_defconfig
+++ b/configs/sc589-ezkit_defconfig
@@ -13,9 +13,7 @@ CONFIG_SPL_BSS_START_ADDR=0x200A0000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SC58X=y
 CONFIG_TARGET_SC589_EZKIT=y
-CONFIG_SC5XX_UBOOT_OFFSET=0x20000
 CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
-CONFIG_SC5XX_ROOTFS_OFFSET=0x6E0000
 CONFIG_SC5XX_LOADADDR=0xC3000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_ADI_USE_DMC1=y
diff --git a/configs/sc589-mini_defconfig b/configs/sc589-mini_defconfig
index 92c2741f701..32678b63a9f 100644
--- a/configs/sc589-mini_defconfig
+++ b/configs/sc589-mini_defconfig
@@ -12,9 +12,7 @@ CONFIG_SPL_BSS_START_ADDR=0x200A0000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SC58X=y
 CONFIG_TARGET_SC589_MINI=y
-CONFIG_SC5XX_UBOOT_OFFSET=0x20000
 CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
-CONFIG_SC5XX_ROOTFS_OFFSET=0x8E0000
 CONFIG_SC5XX_LOADADDR=0xC3000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_ADI_USE_DMC1=y
diff --git a/include/env/adi/adi_boot.env b/include/env/adi/adi_boot.env
index db4148b1af9..b574892e0a0 100644
--- a/include/env/adi/adi_boot.env
+++ b/include/env/adi/adi_boot.env
@@ -1,9 +1,7 @@
 /*
  * A target board needs to set these variables for the commands below to work:
  *
- * - adi_stage2_offset, the location of stage2-boot.ldr on the SPI flash
  * - adi_image_offset, location of the fitImage on the SPI flash
- * - adi_rfs_offset, location of the RFS on the SPI flash
  * - loadaddr, where you want to load things
  * - jffs2file, name of the jffs2 file for update, ex adsp-sc5xx-tiny-adsp-sc573.jffs2
  */
@@ -15,7 +13,6 @@
 #endif
 
 /* Config options */
-imagefile=fitImage
 ethaddr=02:80:ad:20:31:e8
 eth1addr=02:80:ad:20:31:e9
 uart_console=CONFIG_UART_CONSOLE
@@ -25,11 +22,6 @@ initrd_high=0xffffffffffffffff
 initrd_high=0xffffffff
 #endif
 
-/* Helper routines */
-init_ethernet=mii info;
-	dhcp;
-	setenv serverip ${tftpserverip}
-
 /* Args for each boot mode */
 adi_bootargs=EARLY_PRINTK console=ttySC0,CONFIG_BAUDRATE vmalloc=512M
 ramargs=setenv bootargs ${adi_bootargs}
@@ -73,48 +65,3 @@ ramboot=run init_ethernet;
 	run ramargs;
 	bootm ${loadaddr}
 #endif
-
-/* Update commands */
-stage1file=stage1-boot.ldr
-stage2file=stage2-boot.ldr
-
-#if defined(USE_SPI) || defined(USE_OSPI)
-update_spi_uboot_stage1=tftp ${loadaddr} ${tftp_dir_prefix}${stage1file};
-	sf probe ${sfdev};
-	sf update ${loadaddr} 0x0 ${filesize}
-update_spi_uboot_stage2=tftp ${loadaddr} ${tftp_dir_prefix}${stage2file};
-	sf probe ${sfdev};
-	sf update ${loadaddr} ${adi_stage2_offset} ${filesize}
-update_spi_uboot=run update_spi_uboot_stage1;
-	run update_spi_uboot_stage2;
-update_spi_fit=tftp ${loadaddr} ${tftp_dir_prefix}${imagefile};
-	sf probe ${sfdev};
-	sf update ${loadaddr} ${adi_image_offset} ${filesize};
-	setenv imagesize ${filesize}
-update_spi_rfs=tftp ${loadaddr} ${tftp_dir_prefix}${jffs2file};
-	sf probe ${sfdev};
-	sf update ${loadaddr} ${adi_rfs_offset} ${filesize}
-
-start_update_spi=run init_ethernet;
-	run update_spi_uboot;
-	run update_spi_fit;
-	run update_spi_rfs;
-start_update_spi_uboot_only=run init_ethernet;
-	run update_spi_uboot;
-#endif
-
-#if defined(USE_SPI)
-update_spi=setenv sfdev CONFIG_SC_BOOT_SPI_BUS:CONFIG_SC_BOOT_SPI_SSEL;
-	setenv bootcmd run spiboot;
-	setenv argscmd spiargs;
-	run start_update_spi;
-	saveenv
-#endif
-
-#if defined(USE_OSPI)
-update_ospi=setenv sfdev CONFIG_SC_BOOT_OSPI_BUS:CONFIG_SC_BOOT_OSPI_SSEL;
-	setenv bootcmd run ospiboot;
-	setenv argscmd spiargs;
-	run start_update_spi;
-	saveenv
-#endif
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 03/14] mach-sc5xx: Update boot commands
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
  2026-04-10 13:57 ` [PATCH v4 01/14] configs: sc5xx: Do not store environment in SPI flash Caleb Ethridge
  2026-04-10 13:57 ` [PATCH v4 02/14] mach-sc5xx: Remove update commands from default environment Caleb Ethridge
@ 2026-04-10 13:57 ` Caleb Ethridge
  2026-04-10 13:57 ` [PATCH v4 04/14] mach-sc5xx: Switch from tftp to wget Caleb Ethridge
                   ` (10 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:57 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Update the default boot commands to match the expected
bootargs in Linux and new SPI partitioning scheme.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 board/adi/sc573-ezkit/sc573-ezkit.env           |  2 +-
 board/adi/sc584-ezkit/sc584-ezkit.env           |  2 +-
 board/adi/sc589-ezkit/sc589-ezkit.env           |  2 +-
 board/adi/sc589-mini/sc589-mini.env             |  2 +-
 board/adi/sc594-som-ezkit/sc594-som-ezkit.env   |  2 +-
 board/adi/sc594-som-ezlite/sc594-som-ezlite.env |  2 +-
 board/adi/sc598-som-ezkit/sc598-som-ezkit.env   |  2 +-
 board/adi/sc598-som-ezlite/sc598-som-ezlite.env |  2 +-
 configs/sc573-ezkit_defconfig                   |  1 -
 configs/sc584-ezkit_defconfig                   |  1 -
 configs/sc589-ezkit_defconfig                   |  1 -
 configs/sc589-mini_defconfig                    |  1 -
 configs/sc594-som-ezkit-spl_defconfig           |  1 +
 configs/sc594-som-ezlite-spl_defconfig          |  1 +
 configs/sc598-som-ezkit-spl_defconfig           |  1 +
 configs/sc598-som-ezlite-spl_defconfig          |  1 +
 include/env/adi/adi_boot.env                    | 16 ++++++++++------
 17 files changed, 22 insertions(+), 18 deletions(-)

diff --git a/board/adi/sc573-ezkit/sc573-ezkit.env b/board/adi/sc573-ezkit/sc573-ezkit.env
index c8781aaad82..51157ff36aa 100644
--- a/board/adi/sc573-ezkit/sc573-ezkit.env
+++ b/board/adi/sc573-ezkit/sc573-ezkit.env
@@ -3,8 +3,8 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc573-ezkit.jffs2
+adi_image_offset=0xe0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc584-ezkit/sc584-ezkit.env b/board/adi/sc584-ezkit/sc584-ezkit.env
index 2a76c005d1c..6d4b20d70f6 100644
--- a/board/adi/sc584-ezkit/sc584-ezkit.env
+++ b/board/adi/sc584-ezkit/sc584-ezkit.env
@@ -3,8 +3,8 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc584-ezkit.jffs2
+adi_image_offset=0xe0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.env b/board/adi/sc589-ezkit/sc589-ezkit.env
index 8eaa776cc6e..d068b44573f 100644
--- a/board/adi/sc589-ezkit/sc589-ezkit.env
+++ b/board/adi/sc589-ezkit/sc589-ezkit.env
@@ -3,8 +3,8 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-ezkit.jffs2
+adi_image_offset=0xe0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc589-mini/sc589-mini.env b/board/adi/sc589-mini/sc589-mini.env
index a7addcd3957..3827cf4e9a5 100644
--- a/board/adi/sc589-mini/sc589-mini.env
+++ b/board/adi/sc589-mini/sc589-mini.env
@@ -3,8 +3,8 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-mini.jffs2
+adi_image_offset=0xe0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
index 85fa8c8d49c..69d2ec3ba03 100644
--- a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
+++ b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
@@ -3,8 +3,8 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezkit.jffs2
+adi_image_offset=0x110000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
index f2ee8d06801..f915175e041 100644
--- a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
+++ b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
@@ -3,8 +3,8 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezlite.jffs2
+adi_image_offset=0x110000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
index 080afaef406..b6f477c8402 100644
--- a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
+++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
@@ -3,8 +3,8 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezkit.jffs2
+adi_image_offset=0x110000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
index a3486de503e..cbf5d5e60f1 100644
--- a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
+++ b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
@@ -3,7 +3,7 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
+adi_image_offset=0x100000
 loadaddr=CONFIG_SC5XX_LOADADDR
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezlite.jffs2
 
diff --git a/configs/sc573-ezkit_defconfig b/configs/sc573-ezkit_defconfig
index a58e74d3a45..e0ce5fabd78 100644
--- a/configs/sc573-ezkit_defconfig
+++ b/configs/sc573-ezkit_defconfig
@@ -5,7 +5,6 @@ CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
-CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
 CONFIG_SC5XX_LOADADDR=0x83000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_CGU0_CLKOUTSEL=7
diff --git a/configs/sc584-ezkit_defconfig b/configs/sc584-ezkit_defconfig
index 7975a610ca3..52ab7c9337b 100644
--- a/configs/sc584-ezkit_defconfig
+++ b/configs/sc584-ezkit_defconfig
@@ -10,7 +10,6 @@ CONFIG_SPL_STACK=0x200C0000
 CONFIG_SPL_BSS_START_ADDR=0x200A0000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SC58X=y
-CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
 CONFIG_SC5XX_LOADADDR=0x89300000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_ADI_BUG_EZKHW21=y
diff --git a/configs/sc589-ezkit_defconfig b/configs/sc589-ezkit_defconfig
index 0ceb57f1f42..a249fe8df7b 100644
--- a/configs/sc589-ezkit_defconfig
+++ b/configs/sc589-ezkit_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_BSS_START_ADDR=0x200A0000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SC58X=y
 CONFIG_TARGET_SC589_EZKIT=y
-CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
 CONFIG_SC5XX_LOADADDR=0xC3000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_ADI_USE_DMC1=y
diff --git a/configs/sc589-mini_defconfig b/configs/sc589-mini_defconfig
index 32678b63a9f..25285695367 100644
--- a/configs/sc589-mini_defconfig
+++ b/configs/sc589-mini_defconfig
@@ -12,7 +12,6 @@ CONFIG_SPL_BSS_START_ADDR=0x200A0000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SC58X=y
 CONFIG_TARGET_SC589_MINI=y
-CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
 CONFIG_SC5XX_LOADADDR=0xC3000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_ADI_USE_DMC1=y
diff --git a/configs/sc594-som-ezkit-spl_defconfig b/configs/sc594-som-ezkit-spl_defconfig
index c379de2c146..89ef08c1a72 100644
--- a/configs/sc594-som-ezkit-spl_defconfig
+++ b/configs/sc594-som-ezkit-spl_defconfig
@@ -74,3 +74,4 @@ CONFIG_SPL_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
+CONFIG_SC5XX_LOADADDR=0xA2000000
diff --git a/configs/sc594-som-ezlite-spl_defconfig b/configs/sc594-som-ezlite-spl_defconfig
index 54b26ed85c2..9e907d31136 100644
--- a/configs/sc594-som-ezlite-spl_defconfig
+++ b/configs/sc594-som-ezlite-spl_defconfig
@@ -83,3 +83,4 @@ CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
 # CONFIG_SPL_CRC8 is not set
 # CONFIG_TOOLS_MKEFICAPSULE is not set
+CONFIG_SC5XX_LOADADDR=0xA2000000
diff --git a/configs/sc598-som-ezkit-spl_defconfig b/configs/sc598-som-ezkit-spl_defconfig
index 7027a7f8a2a..ea1e0b6202c 100644
--- a/configs/sc598-som-ezkit-spl_defconfig
+++ b/configs/sc598-som-ezkit-spl_defconfig
@@ -108,3 +108,4 @@ CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
 # CONFIG_SPL_CRC8 is not set
 # CONFIG_TOOLS_MKEFICAPSULE is not set
+CONFIG_SC5XX_LOADADDR=0x90000000
diff --git a/configs/sc598-som-ezlite-spl_defconfig b/configs/sc598-som-ezlite-spl_defconfig
index 0b59b36f264..0b47f6febba 100644
--- a/configs/sc598-som-ezlite-spl_defconfig
+++ b/configs/sc598-som-ezlite-spl_defconfig
@@ -106,3 +106,4 @@ CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
 # CONFIG_SPL_CRC8 is not set
 # CONFIG_TOOLS_MKEFICAPSULE is not set
+CONFIG_SC5XX_LOADADDR=0x90000000
diff --git a/include/env/adi/adi_boot.env b/include/env/adi/adi_boot.env
index b574892e0a0..3c196e40603 100644
--- a/include/env/adi/adi_boot.env
+++ b/include/env/adi/adi_boot.env
@@ -40,23 +40,27 @@ nfsboot=run init_ethernet;
 #endif
 
 #if defined(USE_MMC)
-mmcargs=setenv bootargs root=/dev/mmcblk0p1 rw rootfstype=ext4 rootwait ${adi_bootargs}
+mmcargs=setenv bootargs root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ${adi_bootargs}
 mmcboot=mmc rescan;
-	ext4load mmc 0:1 ${loadaddr} /boot/${imagefile};
+	ext4load mmc 0:1 ${loadaddr} /fitImage;
 	run mmcargs;
 	bootm ${loadaddr}
 #endif
 
-#if defined(USE_SPI) || defined(USE_OSPI)
-spiargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2 ${adi_bootargs}
+#if defined(USE_SPI)
+spiargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2 ${adi_bootargs}; setenv sfdev CONFIG_SC_BOOT_SPI_BUS:CONFIG_SC_BOOT_SPI_SSEL
 spiboot=run spiargs;
 	sf probe ${sfdev};
-	sf read ${loadaddr} ${adi_image_offset} ${imagesize};
+	sf read ${loadaddr} ${adi_image_offset} 0xF00000;
 	bootm ${loadaddr}
 #endif
 
 #if defined(USE_OSPI)
-ospiboot=run spiboot
+ospiargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2 ${adi_bootargs}; setenv sfdev CONFIG_SC_BOOT_OSPI_BUS:CONFIG_SC_BOOT_OSPI_SSEL
+ospiboot=run ospiargs;
+	sf probe ${sfdev};
+	sf read ${loadaddr} ${adi_image_offset} 0xF00000;
+	bootm ${loadaddr}
 #endif
 
 #if defined(USE_RAM)
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 04/14] mach-sc5xx: Switch from tftp to wget
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (2 preceding siblings ...)
  2026-04-10 13:57 ` [PATCH v4 03/14] mach-sc5xx: Update boot commands Caleb Ethridge
@ 2026-04-10 13:57 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 05/14] mach-sc5xx: Add USB boot command Caleb Ethridge
                   ` (9 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:57 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Switch the nfsboot and other relevant commands to use
wget instead of tftp. This also includes the addition of
the httpdstp variable for selecting the wget port.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 include/env/adi/adi_boot.env | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/include/env/adi/adi_boot.env b/include/env/adi/adi_boot.env
index 3c196e40603..eb098dd2256 100644
--- a/include/env/adi/adi_boot.env
+++ b/include/env/adi/adi_boot.env
@@ -15,6 +15,7 @@
 /* Config options */
 ethaddr=02:80:ad:20:31:e8
 eth1addr=02:80:ad:20:31:e9
+httpdstp=8000
 uart_console=CONFIG_UART_CONSOLE
 #ifdef CONFIG_SC59X_64
 initrd_high=0xffffffffffffffff
@@ -27,15 +28,14 @@ adi_bootargs=EARLY_PRINTK console=ttySC0,CONFIG_BAUDRATE vmalloc=512M
 ramargs=setenv bootargs ${adi_bootargs}
 
 addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off
+rootpath=/romfs
 
 /* Boot modes are selectable and should be defined in the board env before including */
 #if defined(USE_NFS)
-// rootpath is set by CONFIG_ROOTPATH
 nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath},tcp,nfsvers=3 ${adi_bootargs}
-nfsboot=run init_ethernet;
-	tftp ${loadaddr} ${tftp_dir_prefix}${imagefile};
-	run nfsargs;
+nfsboot= run nfsargs;
 	run addip;
+	wget ${loadaddr} ${serverip}:/fitImage;
 	bootm ${loadaddr}
 #endif
 
@@ -64,8 +64,7 @@ ospiboot=run ospiargs;
 #endif
 
 #if defined(USE_RAM)
-ramboot=run init_ethernet;
-	tftp ${loadaddr} ${tfpt_dir_prefix}${imagefile};
+ramboot= wget ${loadaddr} ${serverip}:/fitImage;
 	run ramargs;
 	bootm ${loadaddr}
 #endif
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 05/14] mach-sc5xx: Add USB boot command
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (3 preceding siblings ...)
  2026-04-10 13:57 ` [PATCH v4 04/14] mach-sc5xx: Switch from tftp to wget Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 06/14] mach-sc5xx: Remove preliminary binman support Caleb Ethridge
                   ` (8 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Add the USB boot command to the environments
of the boards that support it.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 board/adi/sc573-ezkit/sc573-ezkit.env         | 1 +
 board/adi/sc589-ezkit/sc589-ezkit.env         | 1 +
 board/adi/sc589-mini/sc589-mini.env           | 1 +
 board/adi/sc594-som-ezkit/sc594-som-ezkit.env | 1 +
 board/adi/sc598-som-ezkit/sc598-som-ezkit.env | 1 +
 include/env/adi/adi_boot.env                  | 7 +++++++
 6 files changed, 12 insertions(+)

diff --git a/board/adi/sc573-ezkit/sc573-ezkit.env b/board/adi/sc573-ezkit/sc573-ezkit.env
index 51157ff36aa..36bd207f410 100644
--- a/board/adi/sc573-ezkit/sc573-ezkit.env
+++ b/board/adi/sc573-ezkit/sc573-ezkit.env
@@ -11,5 +11,6 @@ loadaddr=CONFIG_SC5XX_LOADADDR
 #define USE_SPI
 #define USE_RAM
 #define USE_MMC
+#define USE_USB
 
 #include <env/adi/adi_boot.env>
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.env b/board/adi/sc589-ezkit/sc589-ezkit.env
index d068b44573f..a4a686158ca 100644
--- a/board/adi/sc589-ezkit/sc589-ezkit.env
+++ b/board/adi/sc589-ezkit/sc589-ezkit.env
@@ -11,5 +11,6 @@ loadaddr=CONFIG_SC5XX_LOADADDR
 #define USE_RAM
 #define USE_MMC
 #define USE_SPI
+#define USE_USB
 
 #include <env/adi/adi_boot.env>
diff --git a/board/adi/sc589-mini/sc589-mini.env b/board/adi/sc589-mini/sc589-mini.env
index 3827cf4e9a5..2a322bc6761 100644
--- a/board/adi/sc589-mini/sc589-mini.env
+++ b/board/adi/sc589-mini/sc589-mini.env
@@ -11,5 +11,6 @@ loadaddr=CONFIG_SC5XX_LOADADDR
 #define USE_RAM
 #define USE_SPI
 #define USE_MMC
+#define USE_USB
 
 #include <env/adi/adi_boot.env>
diff --git a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
index 69d2ec3ba03..a4c72f2e9c7 100644
--- a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
+++ b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
@@ -12,5 +12,6 @@ loadaddr=CONFIG_SC5XX_LOADADDR
 #define USE_OSPI
 #define USE_RAM
 #define USE_MMC
+#define USE_USB
 
 #include <env/adi/adi_boot.env>
diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
index b6f477c8402..754dcece976 100644
--- a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
+++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
@@ -12,5 +12,6 @@ loadaddr=CONFIG_SC5XX_LOADADDR
 #define USE_OSPI
 #define USE_RAM
 #define USE_MMC
+#define USE_USB
 
 #include <env/adi/adi_boot.env>
diff --git a/include/env/adi/adi_boot.env b/include/env/adi/adi_boot.env
index eb098dd2256..d6caa95325e 100644
--- a/include/env/adi/adi_boot.env
+++ b/include/env/adi/adi_boot.env
@@ -68,3 +68,10 @@ ramboot= wget ${loadaddr} ${serverip}:/fitImage;
 	run ramargs;
 	bootm ${loadaddr}
 #endif
+
+#if defined(USE_USB)
+usbargs=setenv bootargs root=/dev/sda2 rw rootfstype=ext4 rootwait ${adi_bootargs}
+usbboot=usb start;
+	ext4load usb 0:1 ${loadaddr} /fitImage; run usbargs;
+	bootm ${loadaddr}
+#endif
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 06/14] mach-sc5xx: Remove preliminary binman support
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (4 preceding siblings ...)
  2026-04-10 13:58 ` [PATCH v4 05/14] mach-sc5xx: Add USB boot command Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 07/14] dts: sc594: Fix gige-reset line on EZKIT Caleb Ethridge
                   ` (7 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Remove preliminary binman support from all sc5xx ADSP boards.
Full support was never added because it was unused.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 arch/arm/dts/sc5xx.dtsi     | 41 -------------------------------------
 arch/arm/mach-sc5xx/Kconfig | 33 -----------------------------
 2 files changed, 74 deletions(-)

diff --git a/arch/arm/dts/sc5xx.dtsi b/arch/arm/dts/sc5xx.dtsi
index 9d346ae62e0..072631e34f7 100644
--- a/arch/arm/dts/sc5xx.dtsi
+++ b/arch/arm/dts/sc5xx.dtsi
@@ -25,47 +25,6 @@
 		bootph-pre-ram;
 	};
 
-#ifdef CONFIG_SC5XX_USE_BINMAN
-	binman {
-		filename = CONFIG_SC5XX_BINMAN_FILENAME;
-		stage1-boot {
-			offset = <CONFIG_SC5XX_UBOOT_SPL_OFFSET>;
-			type = "blob-ext";
-			filename = "spl/u-boot-spl.ldr";
-		};
-
-		/* since falcon mode can jump from SPL to OS directly
-		 * full u-boot is optional
-		 *
-		 * @todo: review if we can say this given support has
-		 * not yet been upstreamed. Otherwise we might have to
-		 * invoke binman only for full u-boot.
-		 */
-		stage2-boot {
-			offset = <CONFIG_SC5XX_UBOOT_OFFSET>;
-			type = "blob-ext";
-			filename = "u-boot.ldr";
-			optional;
-		};
-
-#ifdef CONFIG_SC5XX_FITIMAGE_NAME
-		fitImage {
-			offset = <CONFIG_SC5XX_FITIMAGE_OFFSET>;
-			type = "blob-ext";
-			filename = CONFIG_SC5XX_FITIMAGE_NAME;
-		};
-#endif
-
-#ifdef CONFIG_SC5XX_ROOTFS_NAME
-		rfs {
-			offset = <CONFIG_SC5XX_ROOTFS_OFFSET>;
-			type = "blob-ext";
-			filename = CONFIG_SC5XX_ROOTFS_NAME;
-		};
-#endif
-	};
-#endif
-
 	clocks {
 		dummy: dummy {
 			compatible = "fixed-clock";
diff --git a/arch/arm/mach-sc5xx/Kconfig b/arch/arm/mach-sc5xx/Kconfig
index cfa7ed46a82..70fab57fb3c 100644
--- a/arch/arm/mach-sc5xx/Kconfig
+++ b/arch/arm/mach-sc5xx/Kconfig
@@ -146,39 +146,6 @@ config SC5XX_LOADADDR
 	help
 	  The default load address for u-boot.
 
-menu "Binman configuration"
-config SC5XX_USE_BINMAN
-	bool "Use binman for final image"
-	select BINMAN
-	help
-	  If you wish to use binman to assemble an image, say 'Y' here.
-	  This will enable binman-specific sections in the device tree.
-
-config SC5XX_BINMAN_FILENAME
-	string "Image name"
-	default "sc5xx-image.img"
-	depends on SC5XX_USE_BINMAN
-	help
-	  The name of the image that will be created by binman.
-	  This is used to create the final image.
-
-config SC5XX_FITIMAGE_NAME
-	string "FitImage name"
-	default "fitImage"
-	depends on SC5XX_USE_BINMAN
-	help
-	  The name of the fitImage to be packed by binman.
-	  This is used to create the final image.
-
-config SC5XX_ROOTFS_NAME
-	string "RootFS name"
-	default "rootfs"
-	depends on SC5XX_USE_BINMAN
-	help
-	  The name of the rootfs to be packed by binman.
-	  This is used to create the final image.
-endmenu
-
 config ADI_IMAGE
 	string "ADI fitImage type"
 	help
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 07/14] dts: sc594: Fix gige-reset line on EZKIT
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (5 preceding siblings ...)
  2026-04-10 13:58 ` [PATCH v4 06/14] mach-sc5xx: Remove preliminary binman support Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 08/14] mach-sc5xx: sc573: Rename EZKIT board to EZLITE Caleb Ethridge
                   ` (6 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

The gige-reset line on the EZKIT was updated for the
sc598 but not the sc594. This commit aligns the two .dts
files since they are describing the same hardware, the
EZKIT carrier board.

Fixes: be79378 ("board: adi: Add support for SC594")
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 arch/arm/dts/sc594-som-ezkit.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/dts/sc594-som-ezkit.dts b/arch/arm/dts/sc594-som-ezkit.dts
index dea9a6e27f2..396502b6745 100644
--- a/arch/arm/dts/sc594-som-ezkit.dts
+++ b/arch/arm/dts/sc594-som-ezkit.dts
@@ -130,7 +130,7 @@
 
 		gige-reset {
 			gpio-hog;
-			gpios = <15 GPIO_ACTIVE_HIGH>;
+			gpios = <15 GPIO_ACTIVE_LOW>;
 			output-high;
 			line-name = "gige-reset";
 			bootph-pre-ram;
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 08/14] mach-sc5xx: sc573: Rename EZKIT board to EZLITE
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (6 preceding siblings ...)
  2026-04-10 13:58 ` [PATCH v4 07/14] dts: sc594: Fix gige-reset line on EZKIT Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 09/14] mach-sc5xx: Update image load address Caleb Ethridge
                   ` (5 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Rename the SC573 EZKIT board to EZLITE across the device tree,
defconfig, board file, and related Kconfig/Makefile entries to
match with release naming. EZKIT was used internally before the
official product release.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 arch/arm/dts/Makefile                                     | 2 +-
 arch/arm/dts/{sc573-ezkit.dts => sc573-ezlite.dts}        | 4 ++--
 arch/arm/mach-sc5xx/Kconfig                               | 8 ++++----
 arch/arm/mach-sc5xx/init/dmcinit.c                        | 2 +-
 board/adi/{sc573-ezkit => sc573-ezlite}/Kconfig           | 8 ++++----
 board/adi/{sc573-ezkit => sc573-ezlite}/Makefile          | 2 +-
 .../sc573-ezkit.c => sc573-ezlite/sc573-ezlite.c}         | 0
 .../sc573-ezkit.env => sc573-ezlite/sc573-ezlite.env}     | 0
 configs/{sc573-ezkit_defconfig => sc573-ezlite_defconfig} | 2 +-
 doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml           | 2 +-
 include/configs/{sc573-ezkit.h => sc573-ezlite.h}         | 4 ++--
 11 files changed, 17 insertions(+), 17 deletions(-)
 rename arch/arm/dts/{sc573-ezkit.dts => sc573-ezlite.dts} (98%)
 rename board/adi/{sc573-ezkit => sc573-ezlite}/Kconfig (92%)
 rename board/adi/{sc573-ezkit => sc573-ezlite}/Makefile (79%)
 rename board/adi/{sc573-ezkit/sc573-ezkit.c => sc573-ezlite/sc573-ezlite.c} (100%)
 rename board/adi/{sc573-ezkit/sc573-ezkit.env => sc573-ezlite/sc573-ezlite.env} (100%)
 rename configs/{sc573-ezkit_defconfig => sc573-ezlite_defconfig} (98%)
 rename include/configs/{sc573-ezkit.h => sc573-ezlite.h} (79%)

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 4085d4c2de1..5e7ddb56ddc 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1181,7 +1181,7 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE) += imx8mm-cl-iot-gate-optee.dtb \
 					imx8mm-cl-iot-gate-ied-tpm0.dtbo \
 					imx8mm-cl-iot-gate-ied-tpm1.dtbo
 
-dtb-$(CONFIG_TARGET_SC573_EZKIT) += sc573-ezkit.dtb
+dtb-$(CONFIG_TARGET_SC573_EZLITE) += sc573-ezlite.dtb
 dtb-$(CONFIG_TARGET_SC584_EZKIT) += sc584-ezkit.dtb
 dtb-$(CONFIG_TARGET_SC589_MINI) += sc589-mini.dtb
 dtb-$(CONFIG_TARGET_SC589_EZKIT) += sc589-ezkit.dtb
diff --git a/arch/arm/dts/sc573-ezkit.dts b/arch/arm/dts/sc573-ezlite.dts
similarity index 98%
rename from arch/arm/dts/sc573-ezkit.dts
rename to arch/arm/dts/sc573-ezlite.dts
index 4a3d1ed5c56..57604d707f7 100644
--- a/arch/arm/dts/sc573-ezkit.dts
+++ b/arch/arm/dts/sc573-ezlite.dts
@@ -9,8 +9,8 @@
 #include "sc57x.dtsi"
 
 / {
-	model = "ADI SC573-EZKIT";
-	compatible = "adi,sc573-ezkit", "adi,sc57x";
+	model = "ADI SC573-EZLITE";
+	compatible = "adi,sc573-ezlite", "adi,sc57x";
 };
 
 &i2c0 {
diff --git a/arch/arm/mach-sc5xx/Kconfig b/arch/arm/mach-sc5xx/Kconfig
index 70fab57fb3c..e311a8adf9a 100644
--- a/arch/arm/mach-sc5xx/Kconfig
+++ b/arch/arm/mach-sc5xx/Kconfig
@@ -25,7 +25,7 @@ config SC57X
 	bool "SC57x series"
 	select COMMON_CLK_ADI_SC57X
 	select CPU_V7A
-	select TARGET_SC573_EZKIT
+	select TARGET_SC573_EZLITE
 
 config SC58X
 	bool "SC58x series"
@@ -51,8 +51,8 @@ endchoice
 
 if SC57X
 
-config TARGET_SC573_EZKIT
-	bool "Support SC573-EZKIT"
+config TARGET_SC573_EZLITE
+	bool "Support SC573-EZLITE"
 
 endif
 
@@ -600,6 +600,6 @@ source "board/adi/sc594-som-ezlite/Kconfig"
 source "board/adi/sc589-ezkit/Kconfig"
 source "board/adi/sc589-mini/Kconfig"
 source "board/adi/sc584-ezkit/Kconfig"
-source "board/adi/sc573-ezkit/Kconfig"
+source "board/adi/sc573-ezlite/Kconfig"
 
 endif
diff --git a/arch/arm/mach-sc5xx/init/dmcinit.c b/arch/arm/mach-sc5xx/init/dmcinit.c
index 12052613feb..2026735cc21 100644
--- a/arch/arm/mach-sc5xx/init/dmcinit.c
+++ b/arch/arm/mach-sc5xx/init/dmcinit.c
@@ -101,7 +101,7 @@
 
 #ifdef CONFIG_TARGET_SC584_EZKIT
 	#define DMC_PADCTL2_VALUE	0x0078283C
-#elif CONFIG_TARGET_SC573_EZKIT
+#elif CONFIG_TARGET_SC573_EZLITE
 	#define DMC_PADCTL2_VALUE	0x00782828
 #elif CONFIG_TARGET_SC589_MINI || CONFIG_TARGET_SC589_EZKIT
 	#define DMC_PADCTL2_VALUE	0x00783C3C
diff --git a/board/adi/sc573-ezkit/Kconfig b/board/adi/sc573-ezlite/Kconfig
similarity index 92%
rename from board/adi/sc573-ezkit/Kconfig
rename to board/adi/sc573-ezlite/Kconfig
index 328563c1296..f3b848ef0f7 100644
--- a/board/adi/sc573-ezkit/Kconfig
+++ b/board/adi/sc573-ezlite/Kconfig
@@ -2,19 +2,19 @@
 #
 # (C) Copyright 2024 - Analog Devices, Inc.
 
-if TARGET_SC573_EZKIT
+if TARGET_SC573_EZLITE
 
 config SYS_BOARD
-	default "sc573-ezkit"
+	default "sc573-ezlite"
 
 config SYS_CONFIG_NAME
-	default "sc573-ezkit"
+	default "sc573-ezlite"
 
 config LDR_CPU
 	default "ADSP-SC573-0.0"
 
 config DEFAULT_DEVICE_TREE
-	default "sc573-ezkit"
+	default "sc573-ezlite"
 
 config ADI_IMAGE
 	default "tiny"
diff --git a/board/adi/sc573-ezkit/Makefile b/board/adi/sc573-ezlite/Makefile
similarity index 79%
rename from board/adi/sc573-ezkit/Makefile
rename to board/adi/sc573-ezlite/Makefile
index 0ea725b992b..77c55af6240 100644
--- a/board/adi/sc573-ezkit/Makefile
+++ b/board/adi/sc573-ezlite/Makefile
@@ -3,4 +3,4 @@
 # (C) Copyright 2025 - Analog Devices, Inc.
 #
 
-obj-y	+= sc573-ezkit.o
+obj-y	+= sc573-ezlite.o
diff --git a/board/adi/sc573-ezkit/sc573-ezkit.c b/board/adi/sc573-ezlite/sc573-ezlite.c
similarity index 100%
rename from board/adi/sc573-ezkit/sc573-ezkit.c
rename to board/adi/sc573-ezlite/sc573-ezlite.c
diff --git a/board/adi/sc573-ezkit/sc573-ezkit.env b/board/adi/sc573-ezlite/sc573-ezlite.env
similarity index 100%
rename from board/adi/sc573-ezkit/sc573-ezkit.env
rename to board/adi/sc573-ezlite/sc573-ezlite.env
diff --git a/configs/sc573-ezkit_defconfig b/configs/sc573-ezlite_defconfig
similarity index 98%
rename from configs/sc573-ezkit_defconfig
rename to configs/sc573-ezlite_defconfig
index e0ce5fabd78..d3f775b13e8 100644
--- a/configs/sc573-ezkit_defconfig
+++ b/configs/sc573-ezlite_defconfig
@@ -46,7 +46,7 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_USE_HOSTNAME=y
-CONFIG_HOSTNAME="sc573-ezkit"
+CONFIG_HOSTNAME="sc573-ezlite"
 CONFIG_NET_RETRY_COUNT=20
 CONFIG_IP_DEFRAG=y
 CONFIG_SPL_CLK=y
diff --git a/doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml b/doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml
index df976c7ae73..ae3b5e6092a 100644
--- a/doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml
+++ b/doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml
@@ -18,7 +18,7 @@ properties:
     oneOf:
       - description: SC57X Series Boards
         items:
-          - const: adi,sc573-ezkit
+          - const: adi,sc573-ezlite
           - const: adi,sc57x
 
       - description: SC58X Series Boards
diff --git a/include/configs/sc573-ezkit.h b/include/configs/sc573-ezlite.h
similarity index 79%
rename from include/configs/sc573-ezkit.h
rename to include/configs/sc573-ezlite.h
index 42e42f8150b..590a8f06fb5 100644
--- a/include/configs/sc573-ezkit.h
+++ b/include/configs/sc573-ezlite.h
@@ -3,8 +3,8 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-#ifndef __CONFIG_SC573_EZKIT_H
-#define __CONFIG_SC573_EZKIT_H
+#ifndef __CONFIG_SC573_EZLITE_H
+#define __CONFIG_SC573_EZLITE_H
 
 /*
  * Memory Settings
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 09/14] mach-sc5xx: Update image load address
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (7 preceding siblings ...)
  2026-04-10 13:58 ` [PATCH v4 08/14] mach-sc5xx: sc573: Rename EZKIT board to EZLITE Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 10/14] mach-sc5xx: Update SPI bootargs for ubifs Caleb Ethridge
                   ` (4 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Update the load address for the image in
each environment to match the updated partitions
in Linux.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 board/adi/sc573-ezlite/sc573-ezlite.env         | 2 +-
 board/adi/sc584-ezkit/sc584-ezkit.env           | 2 +-
 board/adi/sc589-ezkit/sc589-ezkit.env           | 2 +-
 board/adi/sc589-mini/sc589-mini.env             | 2 +-
 board/adi/sc594-som-ezkit/sc594-som-ezkit.env   | 2 +-
 board/adi/sc594-som-ezlite/sc594-som-ezlite.env | 2 +-
 board/adi/sc598-som-ezkit/sc598-som-ezkit.env   | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/board/adi/sc573-ezlite/sc573-ezlite.env b/board/adi/sc573-ezlite/sc573-ezlite.env
index 36bd207f410..4ee08deb1b3 100644
--- a/board/adi/sc573-ezlite/sc573-ezlite.env
+++ b/board/adi/sc573-ezlite/sc573-ezlite.env
@@ -4,7 +4,7 @@
  */
 
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc573-ezkit.jffs2
-adi_image_offset=0xe0000
+adi_image_offset=0xd0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc584-ezkit/sc584-ezkit.env b/board/adi/sc584-ezkit/sc584-ezkit.env
index 6d4b20d70f6..20e5ee0eb76 100644
--- a/board/adi/sc584-ezkit/sc584-ezkit.env
+++ b/board/adi/sc584-ezkit/sc584-ezkit.env
@@ -4,7 +4,7 @@
  */
 
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc584-ezkit.jffs2
-adi_image_offset=0xe0000
+adi_image_offset=0xd0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.env b/board/adi/sc589-ezkit/sc589-ezkit.env
index a4a686158ca..6f314542ecc 100644
--- a/board/adi/sc589-ezkit/sc589-ezkit.env
+++ b/board/adi/sc589-ezkit/sc589-ezkit.env
@@ -4,7 +4,7 @@
  */
 
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-ezkit.jffs2
-adi_image_offset=0xe0000
+adi_image_offset=0xd0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc589-mini/sc589-mini.env b/board/adi/sc589-mini/sc589-mini.env
index 2a322bc6761..c5ea555411e 100644
--- a/board/adi/sc589-mini/sc589-mini.env
+++ b/board/adi/sc589-mini/sc589-mini.env
@@ -4,7 +4,7 @@
  */
 
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-mini.jffs2
-adi_image_offset=0xe0000
+adi_image_offset=0xd0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
index a4c72f2e9c7..4d86eafe145 100644
--- a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
+++ b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
@@ -4,7 +4,7 @@
  */
 
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezkit.jffs2
-adi_image_offset=0x110000
+adi_image_offset=0x100000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
index f915175e041..bfce3a9c9b0 100644
--- a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
+++ b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
@@ -4,7 +4,7 @@
  */
 
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezlite.jffs2
-adi_image_offset=0x110000
+adi_image_offset=0x100000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
index 754dcece976..cbc5a57c755 100644
--- a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
+++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
@@ -4,7 +4,7 @@
  */
 
 jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezkit.jffs2
-adi_image_offset=0x110000
+adi_image_offset=0x100000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
 #define USE_NFS
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 10/14] mach-sc5xx: Update SPI bootargs for ubifs
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (8 preceding siblings ...)
  2026-04-10 13:58 ` [PATCH v4 09/14] mach-sc5xx: Update image load address Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 11/14] configs: sc5xx: Set default bootcmd to SPI boot Caleb Ethridge
                   ` (3 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Update the bootargs used in SPI/OSPI bootmode
to reflect change from jffs to ubifs for the
SPI's filesystem.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 board/adi/sc573-ezlite/sc573-ezlite.env         | 1 -
 board/adi/sc584-ezkit/sc584-ezkit.env           | 1 -
 board/adi/sc589-ezkit/sc589-ezkit.env           | 1 -
 board/adi/sc589-mini/sc589-mini.env             | 1 -
 board/adi/sc594-som-ezkit/sc594-som-ezkit.env   | 1 -
 board/adi/sc594-som-ezlite/sc594-som-ezlite.env | 1 -
 board/adi/sc598-som-ezkit/sc598-som-ezkit.env   | 1 -
 board/adi/sc598-som-ezlite/sc598-som-ezlite.env | 1 -
 include/env/adi/adi_boot.env                    | 5 ++---
 9 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/board/adi/sc573-ezlite/sc573-ezlite.env b/board/adi/sc573-ezlite/sc573-ezlite.env
index 4ee08deb1b3..c909b3b476a 100644
--- a/board/adi/sc573-ezlite/sc573-ezlite.env
+++ b/board/adi/sc573-ezlite/sc573-ezlite.env
@@ -3,7 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc573-ezkit.jffs2
 adi_image_offset=0xd0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc584-ezkit/sc584-ezkit.env b/board/adi/sc584-ezkit/sc584-ezkit.env
index 20e5ee0eb76..1090d2731a5 100644
--- a/board/adi/sc584-ezkit/sc584-ezkit.env
+++ b/board/adi/sc584-ezkit/sc584-ezkit.env
@@ -3,7 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc584-ezkit.jffs2
 adi_image_offset=0xd0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.env b/board/adi/sc589-ezkit/sc589-ezkit.env
index 6f314542ecc..02567830c16 100644
--- a/board/adi/sc589-ezkit/sc589-ezkit.env
+++ b/board/adi/sc589-ezkit/sc589-ezkit.env
@@ -3,7 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-ezkit.jffs2
 adi_image_offset=0xd0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc589-mini/sc589-mini.env b/board/adi/sc589-mini/sc589-mini.env
index c5ea555411e..661c130b835 100644
--- a/board/adi/sc589-mini/sc589-mini.env
+++ b/board/adi/sc589-mini/sc589-mini.env
@@ -3,7 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-mini.jffs2
 adi_image_offset=0xd0000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
index 4d86eafe145..f787d972339 100644
--- a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
+++ b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
@@ -3,7 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezkit.jffs2
 adi_image_offset=0x100000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
index bfce3a9c9b0..9db35ac8d59 100644
--- a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
+++ b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
@@ -3,7 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezlite.jffs2
 adi_image_offset=0x100000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
index cbc5a57c755..f787d972339 100644
--- a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
+++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
@@ -3,7 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezkit.jffs2
 adi_image_offset=0x100000
 loadaddr=CONFIG_SC5XX_LOADADDR
 
diff --git a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
index cbf5d5e60f1..d5364df1613 100644
--- a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
+++ b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
@@ -5,6 +5,5 @@
 
 adi_image_offset=0x100000
 loadaddr=CONFIG_SC5XX_LOADADDR
-jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezlite.jffs2
 
 #include <env/adi/adi_boot.env>
diff --git a/include/env/adi/adi_boot.env b/include/env/adi/adi_boot.env
index d6caa95325e..046f4f8a410 100644
--- a/include/env/adi/adi_boot.env
+++ b/include/env/adi/adi_boot.env
@@ -3,7 +3,6 @@
  *
  * - adi_image_offset, location of the fitImage on the SPI flash
  * - loadaddr, where you want to load things
- * - jffs2file, name of the jffs2 file for update, ex adsp-sc5xx-tiny-adsp-sc573.jffs2
  */
 
 #ifdef CONFIG_SC59X_64
@@ -48,7 +47,7 @@ mmcboot=mmc rescan;
 #endif
 
 #if defined(USE_SPI)
-spiargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2 ${adi_bootargs}; setenv sfdev CONFIG_SC_BOOT_SPI_BUS:CONFIG_SC_BOOT_SPI_SSEL
+spiargs=setenv bootargs rootfstype=ubifs root=ubi0:rootfs ubi.mtd=3 rw ${adi_bootargs}; setenv sfdev CONFIG_SC_BOOT_SPI_BUS:CONFIG_SC_BOOT_SPI_SSEL
 spiboot=run spiargs;
 	sf probe ${sfdev};
 	sf read ${loadaddr} ${adi_image_offset} 0xF00000;
@@ -56,7 +55,7 @@ spiboot=run spiargs;
 #endif
 
 #if defined(USE_OSPI)
-ospiargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2 ${adi_bootargs}; setenv sfdev CONFIG_SC_BOOT_OSPI_BUS:CONFIG_SC_BOOT_OSPI_SSEL
+ospiargs=setenv bootargs rootfstype=ubifs root=ubi0:rootfs ubi.mtd=3 rw ${adi_bootargs}; setenv sfdev CONFIG_SC_BOOT_OSPI_BUS:CONFIG_SC_BOOT_OSPI_SSEL
 ospiboot=run ospiargs;
 	sf probe ${sfdev};
 	sf read ${loadaddr} ${adi_image_offset} 0xF00000;
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 11/14] configs: sc5xx: Set default bootcmd to SPI boot
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (9 preceding siblings ...)
  2026-04-10 13:58 ` [PATCH v4 10/14] mach-sc5xx: Update SPI bootargs for ubifs Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 12/14] arm: sc5xx: Remove SC5XX_LOADADDR Caleb Ethridge
                   ` (2 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Align configs to use the same default bootcommand.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 configs/sc589-ezkit_defconfig          | 2 +-
 configs/sc589-mini_defconfig           | 2 +-
 configs/sc594-som-ezkit-spl_defconfig  | 2 +-
 configs/sc594-som-ezlite-spl_defconfig | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/configs/sc589-ezkit_defconfig b/configs/sc589-ezkit_defconfig
index a249fe8df7b..d8982f62d82 100644
--- a/configs/sc589-ezkit_defconfig
+++ b/configs/sc589-ezkit_defconfig
@@ -22,7 +22,7 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run ramboot"
+CONFIG_BOOTCOMMAND="run spiboot"
 CONFIG_SYS_CBSIZE=512
 CONFIG_CYCLIC_MAX_CPU_TIME_US=1000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
diff --git a/configs/sc589-mini_defconfig b/configs/sc589-mini_defconfig
index 25285695367..78b39b6dd73 100644
--- a/configs/sc589-mini_defconfig
+++ b/configs/sc589-mini_defconfig
@@ -20,7 +20,7 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run ramboot"
+CONFIG_BOOTCOMMAND="run spiboot"
 CONFIG_SYS_CBSIZE=512
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_I2C=y
diff --git a/configs/sc594-som-ezkit-spl_defconfig b/configs/sc594-som-ezkit-spl_defconfig
index 89ef08c1a72..23951d0b5f1 100644
--- a/configs/sc594-som-ezkit-spl_defconfig
+++ b/configs/sc594-som-ezkit-spl_defconfig
@@ -15,7 +15,7 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run ospiboot"
+CONFIG_BOOTCOMMAND="run spiboot"
 CONFIG_SYS_CBSIZE=512
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_SPI_FLASH=y
diff --git a/configs/sc594-som-ezlite-spl_defconfig b/configs/sc594-som-ezlite-spl_defconfig
index 9e907d31136..b4e71b5d2eb 100644
--- a/configs/sc594-som-ezlite-spl_defconfig
+++ b/configs/sc594-som-ezlite-spl_defconfig
@@ -18,7 +18,7 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run ospiboot"
+CONFIG_BOOTCOMMAND="run spiboot"
 CONFIG_SYS_CBSIZE=512
 CONFIG_CYCLIC_MAX_CPU_TIME_US=1000
 CONFIG_SPL_I2C=y
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 12/14] arm: sc5xx: Remove SC5XX_LOADADDR
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (10 preceding siblings ...)
  2026-04-10 13:58 ` [PATCH v4 11/14] configs: sc5xx: Set default bootcmd to SPI boot Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 13/14] arm: sc5xx: add missing boot env selectors Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 14/14] arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and initrd_addr Caleb Ethridge
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge, Ozan Durgut

From: Caleb Ethridge <caleb.ethridge@analog.com>

SC5XX_LOADADDR was an ADI-specific duplicate of standard U-Boot
load address handling. U-Boot already uses CONFIG_SYS_LOAD_ADDR
for the default load address and `loadaddr` for boot commands,
so keeping separate SC5XX-specific names is redundant.

Signed-off-by: Ozan Durgut <ozan.durgut@analog.com>
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 arch/arm/mach-sc5xx/Kconfig                    |  6 ------
 board/adi/sc573-ezlite/sc573-ezlite.env        |  3 ---
 board/adi/sc584-ezkit/sc584-ezkit.env          |  3 ---
 board/adi/sc589-ezkit/sc589-ezkit.env          |  3 ---
 board/adi/sc589-mini/sc589-mini.env            |  3 ---
 board/adi/sc594-som-ezkit/sc594-som-ezkit.env  |  3 ---
 .../adi/sc594-som-ezlite/sc594-som-ezlite.env  |  3 ---
 board/adi/sc598-som-ezkit/sc598-som-ezkit.env  |  3 ---
 .../adi/sc598-som-ezlite/sc598-som-ezlite.env  |  3 ---
 configs/sc573-ezlite_defconfig                 |  2 +-
 configs/sc584-ezkit_defconfig                  |  2 +-
 configs/sc589-ezkit_defconfig                  |  2 +-
 configs/sc589-mini_defconfig                   |  2 +-
 configs/sc594-som-ezkit-spl_defconfig          |  2 +-
 configs/sc594-som-ezlite-spl_defconfig         |  2 +-
 configs/sc598-som-ezkit-spl_defconfig          |  2 +-
 configs/sc598-som-ezlite-spl_defconfig         |  2 +-
 include/env/adi/adi_boot.env                   | 18 +++++++++++-------
 18 files changed, 19 insertions(+), 45 deletions(-)

diff --git a/arch/arm/mach-sc5xx/Kconfig b/arch/arm/mach-sc5xx/Kconfig
index e311a8adf9a..44402b2568d 100644
--- a/arch/arm/mach-sc5xx/Kconfig
+++ b/arch/arm/mach-sc5xx/Kconfig
@@ -140,12 +140,6 @@ config SC5XX_ROOTFS_OFFSET
 	help
 	  The default offset where the rootfs is located.
 
-config SC5XX_LOADADDR
-	hex "Load address"
-	default 0x90000000
-	help
-	  The default load address for u-boot.
-
 config ADI_IMAGE
 	string "ADI fitImage type"
 	help
diff --git a/board/adi/sc573-ezlite/sc573-ezlite.env b/board/adi/sc573-ezlite/sc573-ezlite.env
index c909b3b476a..ab1acabef53 100644
--- a/board/adi/sc573-ezlite/sc573-ezlite.env
+++ b/board/adi/sc573-ezlite/sc573-ezlite.env
@@ -3,9 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=0xd0000
-loadaddr=CONFIG_SC5XX_LOADADDR
-
 #define USE_NFS
 #define USE_SPI
 #define USE_RAM
diff --git a/board/adi/sc584-ezkit/sc584-ezkit.env b/board/adi/sc584-ezkit/sc584-ezkit.env
index 1090d2731a5..740b7b554cb 100644
--- a/board/adi/sc584-ezkit/sc584-ezkit.env
+++ b/board/adi/sc584-ezkit/sc584-ezkit.env
@@ -3,9 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=0xd0000
-loadaddr=CONFIG_SC5XX_LOADADDR
-
 #define USE_NFS
 #define USE_SPI
 #define USE_RAM
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.env b/board/adi/sc589-ezkit/sc589-ezkit.env
index 02567830c16..00f90c7942e 100644
--- a/board/adi/sc589-ezkit/sc589-ezkit.env
+++ b/board/adi/sc589-ezkit/sc589-ezkit.env
@@ -3,9 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=0xd0000
-loadaddr=CONFIG_SC5XX_LOADADDR
-
 #define USE_NFS
 #define USE_RAM
 #define USE_MMC
diff --git a/board/adi/sc589-mini/sc589-mini.env b/board/adi/sc589-mini/sc589-mini.env
index 661c130b835..13079ed7527 100644
--- a/board/adi/sc589-mini/sc589-mini.env
+++ b/board/adi/sc589-mini/sc589-mini.env
@@ -3,9 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=0xd0000
-loadaddr=CONFIG_SC5XX_LOADADDR
-
 #define USE_NFS
 #define USE_RAM
 #define USE_SPI
diff --git a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
index f787d972339..324bfae4571 100644
--- a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
+++ b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
@@ -3,9 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=0x100000
-loadaddr=CONFIG_SC5XX_LOADADDR
-
 #define USE_NFS
 #define USE_SPI
 #define USE_OSPI
diff --git a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
index 9db35ac8d59..bdbfaf0dabe 100644
--- a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
+++ b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
@@ -3,9 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=0x100000
-loadaddr=CONFIG_SC5XX_LOADADDR
-
 #define USE_NFS
 #define USE_SPI
 #define USE_OSPI
diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
index f787d972339..324bfae4571 100644
--- a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
+++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
@@ -3,9 +3,6 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=0x100000
-loadaddr=CONFIG_SC5XX_LOADADDR
-
 #define USE_NFS
 #define USE_SPI
 #define USE_OSPI
diff --git a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
index d5364df1613..c7d7932064a 100644
--- a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
+++ b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
@@ -3,7 +3,4 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
-adi_image_offset=0x100000
-loadaddr=CONFIG_SC5XX_LOADADDR
-
 #include <env/adi/adi_boot.env>
diff --git a/configs/sc573-ezlite_defconfig b/configs/sc573-ezlite_defconfig
index d3f775b13e8..6fc863cda65 100644
--- a/configs/sc573-ezlite_defconfig
+++ b/configs/sc573-ezlite_defconfig
@@ -5,7 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_GPIO=y
 CONFIG_DM_GPIO=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
-CONFIG_SC5XX_LOADADDR=0x83000000
+CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_CGU0_CLKOUTSEL=7
 # CONFIG_EFI_LOADER is not set
diff --git a/configs/sc584-ezkit_defconfig b/configs/sc584-ezkit_defconfig
index 52ab7c9337b..bb24b31b2c0 100644
--- a/configs/sc584-ezkit_defconfig
+++ b/configs/sc584-ezkit_defconfig
@@ -10,7 +10,7 @@ CONFIG_SPL_STACK=0x200C0000
 CONFIG_SPL_BSS_START_ADDR=0x200A0000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SC58X=y
-CONFIG_SC5XX_LOADADDR=0x89300000
+CONFIG_SYS_LOAD_ADDR=0x89300000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_ADI_BUG_EZKHW21=y
 CONFIG_CGU0_CLKOUTSEL=7
diff --git a/configs/sc589-ezkit_defconfig b/configs/sc589-ezkit_defconfig
index d8982f62d82..d3f0380bfed 100644
--- a/configs/sc589-ezkit_defconfig
+++ b/configs/sc589-ezkit_defconfig
@@ -13,7 +13,7 @@ CONFIG_SPL_BSS_START_ADDR=0x200A0000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SC58X=y
 CONFIG_TARGET_SC589_EZKIT=y
-CONFIG_SC5XX_LOADADDR=0xC3000000
+CONFIG_SYS_LOAD_ADDR=0xC3000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_ADI_USE_DMC1=y
 CONFIG_CGU0_CLKOUTSEL=7
diff --git a/configs/sc589-mini_defconfig b/configs/sc589-mini_defconfig
index 78b39b6dd73..1bdede4b739 100644
--- a/configs/sc589-mini_defconfig
+++ b/configs/sc589-mini_defconfig
@@ -12,7 +12,7 @@ CONFIG_SPL_BSS_START_ADDR=0x200A0000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SC58X=y
 CONFIG_TARGET_SC589_MINI=y
-CONFIG_SC5XX_LOADADDR=0xC3000000
+CONFIG_SYS_LOAD_ADDR=0xC3000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_ADI_USE_DMC1=y
 # CONFIG_EFI_LOADER is not set
diff --git a/configs/sc594-som-ezkit-spl_defconfig b/configs/sc594-som-ezkit-spl_defconfig
index 23951d0b5f1..4f8be110ee4 100644
--- a/configs/sc594-som-ezkit-spl_defconfig
+++ b/configs/sc594-som-ezkit-spl_defconfig
@@ -10,6 +10,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
 CONFIG_SPL_SERIAL=y
 CONFIG_SC59X=y
 CONFIG_TARGET_SC594_SOM_EZKIT=y
+CONFIG_SYS_LOAD_ADDR=0xA2000000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
@@ -74,4 +75,3 @@ CONFIG_SPL_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
-CONFIG_SC5XX_LOADADDR=0xA2000000
diff --git a/configs/sc594-som-ezlite-spl_defconfig b/configs/sc594-som-ezlite-spl_defconfig
index b4e71b5d2eb..c045c67569b 100644
--- a/configs/sc594-som-ezlite-spl_defconfig
+++ b/configs/sc594-som-ezlite-spl_defconfig
@@ -9,6 +9,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x200E4000
 CONFIG_SC59X=y
+CONFIG_SYS_LOAD_ADDR=0xA2000000
 CONFIG_CGU1_DIV_S1SELEX=16
 CONFIG_CDU0_CLKO10=5
 CONFIG_SF_DEFAULT_BUS=0
@@ -83,4 +84,3 @@ CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
 # CONFIG_SPL_CRC8 is not set
 # CONFIG_TOOLS_MKEFICAPSULE is not set
-CONFIG_SC5XX_LOADADDR=0xA2000000
diff --git a/configs/sc598-som-ezkit-spl_defconfig b/configs/sc598-som-ezkit-spl_defconfig
index ea1e0b6202c..3c22ee299b9 100644
--- a/configs/sc598-som-ezkit-spl_defconfig
+++ b/configs/sc598-som-ezkit-spl_defconfig
@@ -11,6 +11,7 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SC59X_64=y
 CONFIG_TARGET_SC598_SOM_EZKIT=y
 CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x90000000
 CONFIG_CGU1_PLL3_DDRCLK=y
 CONFIG_CGU1_PLL3_VCO_MSEL=64
 CONFIG_CGU1_PLL3_DCLK_DIV=2
@@ -108,4 +109,3 @@ CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
 # CONFIG_SPL_CRC8 is not set
 # CONFIG_TOOLS_MKEFICAPSULE is not set
-CONFIG_SC5XX_LOADADDR=0x90000000
diff --git a/configs/sc598-som-ezlite-spl_defconfig b/configs/sc598-som-ezlite-spl_defconfig
index 0b47f6febba..d93ed06f65e 100644
--- a/configs/sc598-som-ezlite-spl_defconfig
+++ b/configs/sc598-som-ezlite-spl_defconfig
@@ -11,6 +11,7 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x200E4000
 CONFIG_SC59X_64=y
 CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x90000000
 CONFIG_CGU1_PLL3_DDRCLK=y
 CONFIG_CGU1_PLL3_VCO_MSEL=64
 CONFIG_CGU1_PLL3_DCLK_DIV=2
@@ -106,4 +107,3 @@ CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
 # CONFIG_SPL_CRC8 is not set
 # CONFIG_TOOLS_MKEFICAPSULE is not set
-CONFIG_SC5XX_LOADADDR=0x90000000
diff --git a/include/env/adi/adi_boot.env b/include/env/adi/adi_boot.env
index 046f4f8a410..abf7726ab94 100644
--- a/include/env/adi/adi_boot.env
+++ b/include/env/adi/adi_boot.env
@@ -2,7 +2,6 @@
  * A target board needs to set these variables for the commands below to work:
  *
  * - adi_image_offset, location of the fitImage on the SPI flash
- * - loadaddr, where you want to load things
  */
 
 #ifdef CONFIG_SC59X_64
@@ -21,6 +20,11 @@ initrd_high=0xffffffffffffffff
 #else
 initrd_high=0xffffffff
 #endif
+#if defined(CONFIG_SC59X) || defined(CONFIG_SC59X_64)
+adi_image_offset=0x100000
+#else
+adi_image_offset=0xd0000
+#endif
 
 /* Args for each boot mode */
 adi_bootargs=EARLY_PRINTK console=ttySC0,CONFIG_BAUDRATE vmalloc=512M
@@ -35,7 +39,7 @@ nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath},tcp,nfs
 nfsboot= run nfsargs;
 	run addip;
 	wget ${loadaddr} ${serverip}:/fitImage;
-	bootm ${loadaddr}
+	bootm
 #endif
 
 #if defined(USE_MMC)
@@ -43,7 +47,7 @@ mmcargs=setenv bootargs root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ${adi_bo
 mmcboot=mmc rescan;
 	ext4load mmc 0:1 ${loadaddr} /fitImage;
 	run mmcargs;
-	bootm ${loadaddr}
+	bootm
 #endif
 
 #if defined(USE_SPI)
@@ -51,7 +55,7 @@ spiargs=setenv bootargs rootfstype=ubifs root=ubi0:rootfs ubi.mtd=3 rw ${adi_boo
 spiboot=run spiargs;
 	sf probe ${sfdev};
 	sf read ${loadaddr} ${adi_image_offset} 0xF00000;
-	bootm ${loadaddr}
+	bootm
 #endif
 
 #if defined(USE_OSPI)
@@ -59,18 +63,18 @@ ospiargs=setenv bootargs rootfstype=ubifs root=ubi0:rootfs ubi.mtd=3 rw ${adi_bo
 ospiboot=run ospiargs;
 	sf probe ${sfdev};
 	sf read ${loadaddr} ${adi_image_offset} 0xF00000;
-	bootm ${loadaddr}
+	bootm
 #endif
 
 #if defined(USE_RAM)
 ramboot= wget ${loadaddr} ${serverip}:/fitImage;
 	run ramargs;
-	bootm ${loadaddr}
+	bootm
 #endif
 
 #if defined(USE_USB)
 usbargs=setenv bootargs root=/dev/sda2 rw rootfstype=ext4 rootwait ${adi_bootargs}
 usbboot=usb start;
 	ext4load usb 0:1 ${loadaddr} /fitImage; run usbargs;
-	bootm ${loadaddr}
+	bootm
 #endif
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 13/14] arm: sc5xx: add missing boot env selectors
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (11 preceding siblings ...)
  2026-04-10 13:58 ` [PATCH v4 12/14] arm: sc5xx: Remove SC5XX_LOADADDR Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  2026-04-10 13:58 ` [PATCH v4 14/14] arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and initrd_addr Caleb Ethridge
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Ozan Durgut, Ozan Durgut

From: Ozan Durgut <ozndrgt@gmail.com>

Define the boot options for SC598 SOM EZ-LITE so the shared ADI boot
environment includes the expected boot commands for this board.

SC598 SOM EZ-LITE board environment utilizes the shared ADI boot
environment, but it does not define any of the USE_* boot mode selectors.
Without those selectors, the shared env does not generate the board boot
commands such as `spiboot`. This leaves the default `bootcmd=run spiboot`
without a matching environment command and breaks autoboot.

Fixes: c9e893d ("board: adi: Add support for SC598")
Signed-off-by: Ozan Durgut <ozan.durgut@analog.com>
---
 board/adi/sc598-som-ezlite/sc598-som-ezlite.env | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
index c7d7932064a..ab1acabef53 100644
--- a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
+++ b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
@@ -3,4 +3,10 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
+#define USE_NFS
+#define USE_SPI
+#define USE_RAM
+#define USE_MMC
+#define USE_USB
+
 #include <env/adi/adi_boot.env>
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v4 14/14] arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and initrd_addr
  2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
                   ` (12 preceding siblings ...)
  2026-04-10 13:58 ` [PATCH v4 13/14] arm: sc5xx: add missing boot env selectors Caleb Ethridge
@ 2026-04-10 13:58 ` Caleb Ethridge
  13 siblings, 0 replies; 15+ messages in thread
From: Caleb Ethridge @ 2026-04-10 13:58 UTC (permalink / raw)
  To: u-boot; +Cc: malysagreg, trini, linux, philip, Caleb Ethridge

From: Caleb Ethridge <caleb.ethridge@analog.com>

Add fdt_addr_r, kernel_addr_r, and initrd_addr to the SC5xx boards,
to be used by the booti command.

Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
---
 board/adi/sc573-ezlite/sc573-ezlite.env         | 4 ++++
 board/adi/sc584-ezkit/sc584-ezkit.env           | 4 ++++
 board/adi/sc589-ezkit/sc589-ezkit.env           | 4 ++++
 board/adi/sc589-mini/sc589-mini.env             | 4 ++++
 board/adi/sc594-som-ezkit/sc594-som-ezkit.env   | 4 ++++
 board/adi/sc594-som-ezlite/sc594-som-ezlite.env | 4 ++++
 board/adi/sc598-som-ezkit/sc598-som-ezkit.env   | 4 ++++
 board/adi/sc598-som-ezlite/sc598-som-ezlite.env | 4 ++++
 8 files changed, 32 insertions(+)

diff --git a/board/adi/sc573-ezlite/sc573-ezlite.env b/board/adi/sc573-ezlite/sc573-ezlite.env
index ab1acabef53..2a62526717d 100644
--- a/board/adi/sc573-ezlite/sc573-ezlite.env
+++ b/board/adi/sc573-ezlite/sc573-ezlite.env
@@ -3,6 +3,10 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
+fdt_addr_r=CONFIG_SYS_LOAD_ADDR
+kernel_addr_r=0x84008000
+initrd_addr=0x85000000
+
 #define USE_NFS
 #define USE_SPI
 #define USE_RAM
diff --git a/board/adi/sc584-ezkit/sc584-ezkit.env b/board/adi/sc584-ezkit/sc584-ezkit.env
index 740b7b554cb..48bdb6fb2cd 100644
--- a/board/adi/sc584-ezkit/sc584-ezkit.env
+++ b/board/adi/sc584-ezkit/sc584-ezkit.env
@@ -3,6 +3,10 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
+fdt_addr_r=CONFIG_SYS_LOAD_ADDR
+kernel_addr_r=0x8A308000
+initrd_addr=0x8A800000
+
 #define USE_NFS
 #define USE_SPI
 #define USE_RAM
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.env b/board/adi/sc589-ezkit/sc589-ezkit.env
index 00f90c7942e..1cc0e735672 100644
--- a/board/adi/sc589-ezkit/sc589-ezkit.env
+++ b/board/adi/sc589-ezkit/sc589-ezkit.env
@@ -3,6 +3,10 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
+fdt_addr_r=CONFIG_SYS_LOAD_ADDR
+kernel_addr_r=0xC4008000
+initrd_addr=0xC5000000
+
 #define USE_NFS
 #define USE_RAM
 #define USE_MMC
diff --git a/board/adi/sc589-mini/sc589-mini.env b/board/adi/sc589-mini/sc589-mini.env
index 13079ed7527..f3d21f3afc3 100644
--- a/board/adi/sc589-mini/sc589-mini.env
+++ b/board/adi/sc589-mini/sc589-mini.env
@@ -3,6 +3,10 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
+fdt_addr_r=CONFIG_SYS_LOAD_ADDR
+kernel_addr_r=0xC4008000
+initrd_addr=0xC5000000
+
 #define USE_NFS
 #define USE_RAM
 #define USE_SPI
diff --git a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
index 324bfae4571..2e88b8099bd 100644
--- a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
+++ b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
@@ -3,6 +3,10 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
+fdt_addr_r=CONFIG_SYS_LOAD_ADDR
+kernel_addr_r=0xA3008000
+initrd_addr=0xA8000000
+
 #define USE_NFS
 #define USE_SPI
 #define USE_OSPI
diff --git a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
index bdbfaf0dabe..8cdc7006d1d 100644
--- a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
+++ b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
@@ -3,6 +3,10 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
+fdt_addr_r=CONFIG_SYS_LOAD_ADDR
+kernel_addr_r=0x80008000
+initrd_addr=0x85000000
+
 #define USE_NFS
 #define USE_SPI
 #define USE_OSPI
diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
index 324bfae4571..b9934b0ac5d 100644
--- a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
+++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
@@ -3,6 +3,10 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
+fdt_addr_r=CONFIG_SYS_LOAD_ADDR
+kernel_addr_r=0x9a200000
+initrd_addr=0x9c000000
+
 #define USE_NFS
 #define USE_SPI
 #define USE_OSPI
diff --git a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
index ab1acabef53..ceb8e4e7776 100644
--- a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
+++ b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
@@ -3,6 +3,10 @@
  * (C) Copyright 2024 - Analog Devices, Inc.
  */
 
+fdt_addr_r=CONFIG_SYS_LOAD_ADDR
+kernel_addr_r=0x9a200000
+initrd_addr=0x9c000000
+
 #define USE_NFS
 #define USE_SPI
 #define USE_RAM
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2026-04-11  7:11 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-04-10 13:57 [PATCH v4 00/14] sc5xx Environment Cleanup and Fixes Caleb Ethridge
2026-04-10 13:57 ` [PATCH v4 01/14] configs: sc5xx: Do not store environment in SPI flash Caleb Ethridge
2026-04-10 13:57 ` [PATCH v4 02/14] mach-sc5xx: Remove update commands from default environment Caleb Ethridge
2026-04-10 13:57 ` [PATCH v4 03/14] mach-sc5xx: Update boot commands Caleb Ethridge
2026-04-10 13:57 ` [PATCH v4 04/14] mach-sc5xx: Switch from tftp to wget Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 05/14] mach-sc5xx: Add USB boot command Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 06/14] mach-sc5xx: Remove preliminary binman support Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 07/14] dts: sc594: Fix gige-reset line on EZKIT Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 08/14] mach-sc5xx: sc573: Rename EZKIT board to EZLITE Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 09/14] mach-sc5xx: Update image load address Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 10/14] mach-sc5xx: Update SPI bootargs for ubifs Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 11/14] configs: sc5xx: Set default bootcmd to SPI boot Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 12/14] arm: sc5xx: Remove SC5XX_LOADADDR Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 13/14] arm: sc5xx: add missing boot env selectors Caleb Ethridge
2026-04-10 13:58 ` [PATCH v4 14/14] arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and initrd_addr Caleb Ethridge

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox