[PATCH 0/3] SC5xx Carrier Board Kconfig Cleanup

[Caleb Ethridge <Caleb.Ethridge@analog.com>]

From: Caleb Ethridge <caleb.ethridge@analog.com>

This patch series does some small cleanup of the Kconfig options for the
sc5xx boards. Common code for the SOMCRR carrier boards is now only built
when one of the carrier boards is selected. Previously, it was built
unconditionally which resulted in dead code.

The series also fixes a bug with the sc594 EZLITE where it was being built
with the EZKIT carrier code, resulting in the Ethernet not being set up
properly. As the carrier board Kconfig option was a choice, the select from
the TARGET was being ignored and the fallback was the default EZKIT code.
Carrier board options have been changed from choices to bools so that the
board targets can select the carrier board properly.

Also, removing the explicit carrier board option from the sc598 EZLITE, since
with the change to the bool options for the carrier boards it is no longer
needed.

Caleb Ethridge (3):
  board: adi: Build SOMCRR common code only with a carrier board
  arm: mach-sc5xx: Make the SC5xx board target select the carrier board
  configs: sc598-som-ezlite: drop explicit carrier board option

 arch/arm/mach-sc5xx/Kconfig            | 26 ++++++++++++--------------
 board/adi/carriers/Makefile            |  2 +-
 board/adi/common-sc594-som/sc594-som.c |  4 +---
 board/adi/common-sc598-som/sc598-som.c |  4 +---
 configs/sc598-som-ezlite-spl_defconfig |  1 -
 5 files changed, 15 insertions(+), 22 deletions(-)

-- 
2.43.0