[PATCH v2 0/6] ls1021aiot: Fix the boot on current main and enable FIT

[Mateus Lima Alves <mateuslima.ti@gmail.com>]

These patches get the LS1021A-IoT board booting on current main and let
it boot FIT images.

Tested on my board (rev 1.0 silicon), which also needs a local RCW change
for the UART.

Changes in v2:
- Rebase on main. Only 4/6 conflicted, with commit 8ab9f25f7e39.

Mateus Lima Alves (6):
  armv7: ls102xa: Apply erratum A-008850 on all LS1021A boards
  armv7: ls102xa: Terminate CCI-400 barriers before cpu_init_cp15
  configs: ls1021aiot_sdcard: Reserve 1 MiB for U-Boot in the SPL memory
    map
  configs: ls1021aiot: Enable FIT image support
  configs: ls1021aiot: Allow 64 MiB decompressed OS images
  board: nxp: ls1021aiot: Keep the IFC enabled in the OS device tree

 arch/arm/cpu/armv7/ls102xa/Kconfig  |  2 +-
 arch/arm/cpu/armv7/ls102xa/soc.c    |  3 ---
 arch/arm/cpu/armv7/start.S          |  6 ++++++
 board/nxp/ls1021aiot/ls1021aiot.c   | 16 ++++++++++++++++
 configs/ls1021aiot_qspi_defconfig   |  3 +++
 configs/ls1021aiot_sdcard_defconfig |  7 +++++--
 include/fsl_ddr_sdram.h             |  4 ----
 include/fsl_immap.h                 |  4 ++++
 8 files changed, 35 insertions(+), 10 deletions(-)

-- 
2.43.0