Re: [PATCH 6/8] configs: toradex: add default rootpath

[Marek Vasut <marex@denx.de>]

On 7/22/21 8:10 PM, Oleksandr Suvorov wrote:
> On Thu, Jul 22, 2021 at 9:06 PM Marek Vasut <marex@denx.de> wrote:
>>
>> On 7/22/21 6:32 PM, Oleksandr Suvorov wrote:
>>> Hello Marek,
>>>
>>> On Thu, Jul 22, 2021 at 7:08 PM Marek Vasut <marex@denx.de> wrote:
>>>>
>>>> On 7/22/21 5:49 PM, Oleksandr Suvorov wrote:
>>>>
>>>> [...]
>>>>
>>>>> diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
>>>>> index b04a03f76d..5a90e03edb 100644
>>>>> --- a/include/configs/apalis-imx8.h
>>>>> +++ b/include/configs/apalis-imx8.h
>>>>> @@ -24,6 +24,7 @@
>>>>>     #define CONFIG_IPADDR                       192.168.10.2
>>>>>     #define CONFIG_NETMASK                      255.255.255.0
>>>>>     #define CONFIG_SERVERIP                     192.168.10.1
>>>>> +#define CONFIG_ROOTPATH                      "/srv/nfs"
>>>>
>>>> Rather, all this should be removed, since all these IP addresses and
>>>> root path settings are invalid for most places where the system will be
>>>> used. The user should define their own. It is not recommended to hard
>>>> code this in board config.
>>>
>>> Is it acceptable to move this stuff to Toradex Kconfigs as default values?
>>
>> The general recommendation is to not set such default values at all,
>> just let the user configure what they need.
> 
> Thanks for your feedback! I'll remove this patch from the next version
> of the patchset.

You likely also want to remove all those CONFIG_IPADDR and co.