From: Mark Kettenis <mark.kettenis@xs4all.nl>
To: Jaehoon Chung <jh80.chung@samsung.com>
Cc: kettenis@openbsd.org, u-boot@lists.denx.de, sjg@chromium.org
Subject: Re: [PATCH 0/3] Apple M1 power management controller support
Date: Tue, 21 Dec 2021 09:30:05 +0100 (CET) [thread overview]
Message-ID: <d3cb676e798b8fd8@bloch.sibelius.xs4all.nl> (raw)
In-Reply-To: <a20df45e-b16f-1708-f275-07f1a6d6009f@samsung.com> (message from Jaehoon Chung on Tue, 21 Dec 2021 08:00:38 +0900)
> From: Jaehoon Chung <jh80.chung@samsung.com>
> Date: Tue, 21 Dec 2021 08:00:38 +0900
Hello Jaehoon,
> Dear Mark,
>
> On 12/7/21 4:03 AM, Mark Kettenis wrote:
> > This series adds support for the power management controller found on
> > Apple SoCs based on the device tree bindings submitted to upstream
> > Linux. This is needed to enable power domains for devices that
> > haven't been enabled by earlier boot stages.
>
> Is there any patch before applied this patchset?
This is based on next, with the watchdog patch applied:
https://patchwork.ozlabs.org/project/uboot/list/?series=271919
The drivers are independent, but I suppose you get conflicts in
Kconfig and maybe the device tree without that series applied.
Cheers,
Mark
> >
> >
> > Mark Kettenis (3):
> > arm: dts: apple: Update Apple M1 device trees
> > arm: dts: apple: Add u-boot,dm-pre-reloc properties
> > power: domain: Add Apple pmgr driver
> >
> > arch/arm/Kconfig | 4 +
> > arch/arm/dts/Makefile | 5 +-
> > arch/arm/dts/t8103-j274-u-boot.dtsi | 1 +
> > arch/arm/dts/t8103-j274.dts | 122 +--
> > arch/arm/dts/t8103-j293-u-boot.dtsi | 1 +
> > arch/arm/dts/t8103-j293.dts | 92 +--
> > arch/arm/dts/t8103-j313-u-boot.dtsi | 1 +
> > arch/arm/dts/t8103-j313.dts | 57 ++
> > arch/arm/dts/t8103-j456-u-boot.dtsi | 1 +
> > arch/arm/dts/t8103-j456.dts | 71 ++
> > arch/arm/dts/t8103-j457-u-boot.dtsi | 1 +
> > arch/arm/dts/t8103-j457.dts | 59 ++
> > arch/arm/dts/t8103-jxxx.dtsi | 140 ++++
> > arch/arm/dts/t8103-pmgr.dtsi | 1136 +++++++++++++++++++++++++++
> > arch/arm/dts/t8103-u-boot.dtsi | 25 +
> > arch/arm/dts/t8103.dtsi | 585 +++++++-------
> > drivers/mailbox/Kconfig | 9 +
> > drivers/mailbox/Makefile | 1 +
> > drivers/power/domain/Kconfig | 8 +
> > drivers/power/domain/Makefile | 1 +
> > drivers/power/domain/apple-pmgr.c | 113 +++
> > 21 files changed, 2005 insertions(+), 428 deletions(-)
> > create mode 100644 arch/arm/dts/t8103-j274-u-boot.dtsi
> > create mode 100644 arch/arm/dts/t8103-j293-u-boot.dtsi
> > create mode 100644 arch/arm/dts/t8103-j313-u-boot.dtsi
> > create mode 100644 arch/arm/dts/t8103-j313.dts
> > create mode 100644 arch/arm/dts/t8103-j456-u-boot.dtsi
> > create mode 100644 arch/arm/dts/t8103-j456.dts
> > create mode 100644 arch/arm/dts/t8103-j457-u-boot.dtsi
> > create mode 100644 arch/arm/dts/t8103-j457.dts
> > create mode 100644 arch/arm/dts/t8103-jxxx.dtsi
> > create mode 100644 arch/arm/dts/t8103-pmgr.dtsi
> > create mode 100644 arch/arm/dts/t8103-u-boot.dtsi
> > create mode 100644 drivers/power/domain/apple-pmgr.c
> >
>
>
next prev parent reply other threads:[~2021-12-21 8:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20211206190321epcas1p4d6818c609bb81f779ec2e8b14a951c0b@epcas1p4.samsung.com>
2021-12-06 19:03 ` [PATCH 0/3] Apple M1 power management controller support Mark Kettenis
2021-12-06 19:03 ` [PATCH 1/3] arm: dts: apple: Update Apple M1 device trees Mark Kettenis
2021-12-06 19:03 ` [PATCH 2/3] arm: dts: apple: Add u-boot,dm-pre-reloc properties Mark Kettenis
2021-12-06 19:03 ` [PATCH 3/3] power: domain: Add Apple pmgr driver Mark Kettenis
2021-12-20 23:00 ` [PATCH 0/3] Apple M1 power management controller support Jaehoon Chung
2021-12-21 8:30 ` Mark Kettenis [this message]
2021-12-22 9:56 ` Jaehoon Chung
2021-12-23 21:37 ` Mark Kettenis
2021-12-29 1:50 ` Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d3cb676e798b8fd8@bloch.sibelius.xs4all.nl \
--to=mark.kettenis@xs4all.nl \
--cc=jh80.chung@samsung.com \
--cc=kettenis@openbsd.org \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox