Re: [PATCH] riscv: enable multi-range memory layout

["Wu, Fei" <fei2.wu@intel.com>]

On 9/13/2023 1:05 PM, Heinrich Schuchardt wrote:
> 
> 
> Am 13. September 2023 04:23:14 MESZ schrieb "Wu, Fei" <fei2.wu@intel.com>:
>> On 9/5/2023 6:09 PM, Fei Wu wrote:
>>> In order to enable PCIe passthrough on qemu riscv, the physical memory
>>> range between 3GB and 4GB is reserved. Therefore if guest has 4GB ram,
>>> two ranges are created as [2G, 3G) and [4G, 7G), currently u-boot sets
>>> ram_top to 4G - 1 if the gd->ram_top is above 4G in
>>> board_get_usable_ram_top(), but that address is not backed by ram. This
>>> patch selects the lowest range instead.
>>>
>> I think multi-range memory layout is a common requirement, PCIe
>> passthrough happens to be the first one to require it. Could anyone
>> please take a look at this patch and give your comments?
>>
>> Thanks,
>> Fei.
>>
>>> Signed-off-by: Fei Wu <fei2.wu@intel.com>
>>> ---
>>>  arch/riscv/cpu/generic/dram.c        | 2 +-
>>>  configs/qemu-riscv64_smode_defconfig | 2 +-
> 
> We should consider all riscv64 defconfigs.
> 
OK. I will update qemu-riscv64_defconfig, qemu-riscv64_smode_defconfig
and qemu-riscv64_spl_defconfig.

Thanks,
Fei.

> Best regards
> 
> Heinrich
> 
>>>  2 files changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/riscv/cpu/generic/dram.c b/arch/riscv/cpu/generic/dram.c
>>> index 44e11bd56c..fb53a57b4e 100644
>>> --- a/arch/riscv/cpu/generic/dram.c
>>> +++ b/arch/riscv/cpu/generic/dram.c
>>> @@ -13,7 +13,7 @@ DECLARE_GLOBAL_DATA_PTR;
>>>  
>>>  int dram_init(void)
>>>  {
>>> -	return fdtdec_setup_mem_size_base();
>>> +	return fdtdec_setup_mem_size_base_lowest();
>>>  }
>>>  
>>>  int dram_init_banksize(void)
>>> diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig
>>> index 1d0f021ade..de08a49dab 100644
>>> --- a/configs/qemu-riscv64_smode_defconfig
>>> +++ b/configs/qemu-riscv64_smode_defconfig
>>> @@ -1,6 +1,6 @@
>>>  CONFIG_RISCV=y
>>>  CONFIG_SYS_MALLOC_LEN=0x800000
>>> -CONFIG_NR_DRAM_BANKS=1
>>> +CONFIG_NR_DRAM_BANKS=2
>>>  CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>>>  CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
>>>  CONFIG_ENV_SIZE=0x20000
>>