[PATCH v4 0/8] clk: Switch from soc_clk_dump to clk_ops function

[PATCH v4 0/8] clk: Switch from soc_clk_dump to clk_ops function

[Igor Prusov]

Currently clock providers may override default implementation of
soc_clk_dump function to replace clk dump command output. This causes
confusing behaviour when u-boot is built with one of such drivers
enabled but still has clocks defined using CCF. For example, enabling
CMD_CLK and using clk dump on sandbox target will not show CCF clocks
because k210 driver overrides common soc_clk_dump.

Changelog:
 v1 -> v2:
 - Add missing static to dump functions

 v2 -> v3:
 - Make soc_clk_dump in cmd/clk.c static instead of removing __weak

 v3 -> v4:
 - Rebase and refactor dump for new Amlogic A1 clock controller driver

Igor Prusov (8):
  clk: zynq: Move soc_clk_dump to Zynq clock driver
  clk: ast2600: Move soc_clk_dump function
  clk: k210: Move soc_clk_dump function
  clk: amlogic: Move driver and ops structs
  clk: Add dump operation to clk_ops
  cmd: clk: Use dump function from clk_ops
  clk: treewide: switch to clock dump from clk_ops
  cmd: clk: Make soc_clk_dump static

 arch/arm/mach-zynq/clk.c               |  57 --------------
 arch/mips/mach-pic32/cpu.c             |  23 ------
 cmd/clk.c                              |  13 +++-
 drivers/clk/aspeed/clk_ast2600.c       |  83 ++++++++++----------
 drivers/clk/clk_k210.c                 | 103 ++++++++++++-------------
 drivers/clk/clk_pic32.c                |  39 ++++++++++
 drivers/clk/clk_versal.c               |   7 +-
 drivers/clk/clk_zynq.c                 |  51 ++++++++++++
 drivers/clk/clk_zynqmp.c               |  13 ++--
 drivers/clk/imx/clk-imx8.c             |  11 +--
 drivers/clk/meson/a1.c                 |  54 +++++--------
 drivers/clk/mvebu/armada-37xx-periph.c |   5 +-
 drivers/clk/stm32/clk-stm32mp1.c       |  29 ++-----
 include/clk-uclass.h                   |   3 +
 include/clk.h                          |   2 -
 15 files changed, 244 insertions(+), 249 deletions(-)

-- 
2.34.1

[PATCH v4 1/8] clk: zynq: Move soc_clk_dump to Zynq clock driver

[Igor Prusov]

Move clock dump function in preparation for switching to dump function
in clk_ops.

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Acked-by: Michal Simek <michal.simek@amd.com>
---
 arch/arm/mach-zynq/clk.c | 57 ---------------------------------------
 drivers/clk/clk_zynq.c   | 58 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+), 57 deletions(-)

diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c
index 1945f60e08..e6a67326dd 100644
--- a/arch/arm/mach-zynq/clk.c
+++ b/arch/arm/mach-zynq/clk.c
@@ -13,20 +13,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static const char * const clk_names[clk_max] = {
-	"armpll", "ddrpll", "iopll",
-	"cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
-	"ddr2x", "ddr3x", "dci",
-	"lqspi", "smc", "pcap", "gem0", "gem1",
-	"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
-	"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma",
-	"usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper",
-	"sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper",
-	"can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper",
-	"uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper",
-	"smc_aper", "swdt", "dbg_trc", "dbg_apb"
-};
-
 /**
  * set_cpu_clk_info() - Setup clock information
  *
@@ -65,46 +51,3 @@ int set_cpu_clk_info(void)
 
 	return 0;
 }
-
-/**
- * soc_clk_dump() - Print clock frequencies
- * Returns zero on success
- *
- * Implementation for the clk dump command.
- */
-int soc_clk_dump(void)
-{
-	struct udevice *dev;
-	int i, ret;
-
-	ret = uclass_get_device_by_driver(UCLASS_CLK,
-		DM_DRIVER_GET(zynq_clk), &dev);
-	if (ret)
-		return ret;
-
-	printf("clk\t\tfrequency\n");
-	for (i = 0; i < clk_max; i++) {
-		const char *name = clk_names[i];
-		if (name) {
-			struct clk clk;
-			unsigned long rate;
-
-			clk.id = i;
-			ret = clk_request(dev, &clk);
-			if (ret < 0)
-				return ret;
-
-			rate = clk_get_rate(&clk);
-
-			clk_free(&clk);
-
-			if ((rate == (unsigned long)-ENOSYS) ||
-			    (rate == (unsigned long)-ENXIO))
-				printf("%10s%20s\n", name, "unknown");
-			else
-				printf("%10s%20lu\n", name, rate);
-		}
-	}
-
-	return 0;
-}
diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c
index e80500e382..be5226175f 100644
--- a/drivers/clk/clk_zynq.c
+++ b/drivers/clk/clk_zynq.c
@@ -454,6 +454,64 @@ static int dummy_enable(struct clk *clk)
 	return 0;
 }
 
+static const char * const clk_names[clk_max] = {
+	"armpll", "ddrpll", "iopll",
+	"cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
+	"ddr2x", "ddr3x", "dci",
+	"lqspi", "smc", "pcap", "gem0", "gem1",
+	"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+	"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma",
+	"usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper",
+	"sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper",
+	"can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper",
+	"uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper",
+	"smc_aper", "swdt", "dbg_trc", "dbg_apb"
+};
+
+/**
+ * soc_clk_dump() - Print clock frequencies
+ * Returns zero on success
+ *
+ * Implementation for the clk dump command.
+ */
+int soc_clk_dump(void)
+{
+	struct udevice *dev;
+	int i, ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+					  DM_DRIVER_GET(zynq_clk), &dev);
+	if (ret)
+		return ret;
+
+	printf("clk\t\tfrequency\n");
+	for (i = 0; i < clk_max; i++) {
+		const char *name = clk_names[i];
+
+		if (name) {
+			struct clk clk;
+			unsigned long rate;
+
+			clk.id = i;
+			ret = clk_request(dev, &clk);
+			if (ret < 0)
+				return ret;
+
+			rate = clk_get_rate(&clk);
+
+			clk_free(&clk);
+
+			if ((rate == (unsigned long)-ENOSYS) ||
+			    (rate == (unsigned long)-ENXIO))
+				printf("%10s%20s\n", name, "unknown");
+			else
+				printf("%10s%20lu\n", name, rate);
+		}
+	}
+
+	return 0;
+}
+
 static struct clk_ops zynq_clk_ops = {
 	.get_rate = zynq_clk_get_rate,
 #ifndef CONFIG_SPL_BUILD
-- 
2.34.1

[PATCH v4 2/8] clk: ast2600: Move soc_clk_dump function

[Igor Prusov]

Move clock dump function to avoid forward declaration after switching to
dump in clk_ops.

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
---
 drivers/clk/aspeed/clk_ast2600.c | 70 ++++++++++++++++----------------
 1 file changed, 35 insertions(+), 35 deletions(-)

diff --git a/drivers/clk/aspeed/clk_ast2600.c b/drivers/clk/aspeed/clk_ast2600.c
index e5ada5b6d4..b3cc8392fa 100644
--- a/drivers/clk/aspeed/clk_ast2600.c
+++ b/drivers/clk/aspeed/clk_ast2600.c
@@ -1104,41 +1104,6 @@ static int ast2600_clk_enable(struct clk *clk)
 	return 0;
 }
 
-struct clk_ops ast2600_clk_ops = {
-	.get_rate = ast2600_clk_get_rate,
-	.set_rate = ast2600_clk_set_rate,
-	.enable = ast2600_clk_enable,
-};
-
-static int ast2600_clk_probe(struct udevice *dev)
-{
-	struct ast2600_clk_priv *priv = dev_get_priv(dev);
-
-	priv->scu = devfdt_get_addr_ptr(dev);
-	if (IS_ERR(priv->scu))
-		return PTR_ERR(priv->scu);
-
-	ast2600_init_rgmii_clk(priv->scu, &rgmii_clk_defconfig);
-	ast2600_init_rmii_clk(priv->scu, &rmii_clk_defconfig);
-	ast2600_configure_mac12_clk(priv->scu);
-	ast2600_configure_mac34_clk(priv->scu);
-	ast2600_configure_rsa_ecc_clk(priv->scu);
-
-	return 0;
-}
-
-static int ast2600_clk_bind(struct udevice *dev)
-{
-	int ret;
-
-	/* The reset driver does not have a device node, so bind it here */
-	ret = device_bind_driver(gd->dm_root, "ast_sysreset", "reset", &dev);
-	if (ret)
-		debug("Warning: No reset driver: ret=%d\n", ret);
-
-	return 0;
-}
-
 struct aspeed_clks {
 	ulong id;
 	const char *name;
@@ -1203,6 +1168,41 @@ int soc_clk_dump(void)
 	return 0;
 }
 
+struct clk_ops ast2600_clk_ops = {
+	.get_rate = ast2600_clk_get_rate,
+	.set_rate = ast2600_clk_set_rate,
+	.enable = ast2600_clk_enable,
+};
+
+static int ast2600_clk_probe(struct udevice *dev)
+{
+	struct ast2600_clk_priv *priv = dev_get_priv(dev);
+
+	priv->scu = devfdt_get_addr_ptr(dev);
+	if (IS_ERR(priv->scu))
+		return PTR_ERR(priv->scu);
+
+	ast2600_init_rgmii_clk(priv->scu, &rgmii_clk_defconfig);
+	ast2600_init_rmii_clk(priv->scu, &rmii_clk_defconfig);
+	ast2600_configure_mac12_clk(priv->scu);
+	ast2600_configure_mac34_clk(priv->scu);
+	ast2600_configure_rsa_ecc_clk(priv->scu);
+
+	return 0;
+}
+
+static int ast2600_clk_bind(struct udevice *dev)
+{
+	int ret;
+
+	/* The reset driver does not have a device node, so bind it here */
+	ret = device_bind_driver(gd->dm_root, "ast_sysreset", "reset", &dev);
+	if (ret)
+		debug("Warning: No reset driver: ret=%d\n", ret);
+
+	return 0;
+}
+
 static const struct udevice_id ast2600_clk_ids[] = {
 	{ .compatible = "aspeed,ast2600-scu", },
 	{ },
-- 
2.34.1

[PATCH v4 3/8] clk: k210: Move soc_clk_dump function

[Igor Prusov]

Move clock dump function to avoid forward declaration after switching to
dump in clk_ops.

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
---
 drivers/clk/clk_k210.c | 92 +++++++++++++++++++++---------------------
 1 file changed, 46 insertions(+), 46 deletions(-)

diff --git a/drivers/clk/clk_k210.c b/drivers/clk/clk_k210.c
index c534cc07e0..2f17152021 100644
--- a/drivers/clk/clk_k210.c
+++ b/drivers/clk/clk_k210.c
@@ -1238,52 +1238,6 @@ static int k210_clk_request(struct clk *clk)
 	return 0;
 }
 
-static const struct clk_ops k210_clk_ops = {
-	.request = k210_clk_request,
-	.set_rate = k210_clk_set_rate,
-	.get_rate = k210_clk_get_rate,
-	.set_parent = k210_clk_set_parent,
-	.enable = k210_clk_enable,
-	.disable = k210_clk_disable,
-};
-
-static int k210_clk_probe(struct udevice *dev)
-{
-	int ret;
-	struct k210_clk_priv *priv = dev_get_priv(dev);
-
-	priv->base = dev_read_addr_ptr(dev_get_parent(dev));
-	if (!priv->base)
-		return -EINVAL;
-
-	ret = clk_get_by_index(dev, 0, &priv->in0);
-	if (ret)
-		return ret;
-
-	/*
-	 * Force setting defaults, even before relocation. This is so we can
-	 * set the clock rate for PLL1 before we relocate into aisram.
-	 */
-	if (!(gd->flags & GD_FLG_RELOC))
-		clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
-
-	return 0;
-}
-
-static const struct udevice_id k210_clk_ids[] = {
-	{ .compatible = "canaan,k210-clk" },
-	{ },
-};
-
-U_BOOT_DRIVER(k210_clk) = {
-	.name = "k210_clk",
-	.id = UCLASS_CLK,
-	.of_match = k210_clk_ids,
-	.ops = &k210_clk_ops,
-	.probe = k210_clk_probe,
-	.priv_auto = sizeof(struct k210_clk_priv),
-};
-
 #if IS_ENABLED(CONFIG_CMD_CLK)
 static char show_enabled(struct k210_clk_priv *priv, int id)
 {
@@ -1342,3 +1296,49 @@ int soc_clk_dump(void)
 	return 0;
 }
 #endif
+
+static const struct clk_ops k210_clk_ops = {
+	.request = k210_clk_request,
+	.set_rate = k210_clk_set_rate,
+	.get_rate = k210_clk_get_rate,
+	.set_parent = k210_clk_set_parent,
+	.enable = k210_clk_enable,
+	.disable = k210_clk_disable,
+};
+
+static int k210_clk_probe(struct udevice *dev)
+{
+	int ret;
+	struct k210_clk_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr_ptr(dev_get_parent(dev));
+	if (!priv->base)
+		return -EINVAL;
+
+	ret = clk_get_by_index(dev, 0, &priv->in0);
+	if (ret)
+		return ret;
+
+	/*
+	 * Force setting defaults, even before relocation. This is so we can
+	 * set the clock rate for PLL1 before we relocate into aisram.
+	 */
+	if (!(gd->flags & GD_FLG_RELOC))
+		clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
+
+	return 0;
+}
+
+static const struct udevice_id k210_clk_ids[] = {
+	{ .compatible = "canaan,k210-clk" },
+	{ },
+};
+
+U_BOOT_DRIVER(k210_clk) = {
+	.name = "k210_clk",
+	.id = UCLASS_CLK,
+	.of_match = k210_clk_ids,
+	.ops = &k210_clk_ops,
+	.probe = k210_clk_probe,
+	.priv_auto = sizeof(struct k210_clk_priv),
+};
-- 
2.34.1

Re: [PATCH v4 3/8] clk: k210: Move soc_clk_dump function

[Sean Anderson]

On 10/17/23 12:56, Igor Prusov wrote:
> Move clock dump function to avoid forward declaration after switching to
> dump in clk_ops.
> 
> Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
> ---
>   drivers/clk/clk_k210.c | 92 +++++++++++++++++++++---------------------
>   1 file changed, 46 insertions(+), 46 deletions(-)
> 
> diff --git a/drivers/clk/clk_k210.c b/drivers/clk/clk_k210.c
> index c534cc07e0..2f17152021 100644
> --- a/drivers/clk/clk_k210.c
> +++ b/drivers/clk/clk_k210.c
> @@ -1238,52 +1238,6 @@ static int k210_clk_request(struct clk *clk)
>   	return 0;
>   }
>   
> -static const struct clk_ops k210_clk_ops = {
> -	.request = k210_clk_request,
> -	.set_rate = k210_clk_set_rate,
> -	.get_rate = k210_clk_get_rate,
> -	.set_parent = k210_clk_set_parent,
> -	.enable = k210_clk_enable,
> -	.disable = k210_clk_disable,
> -};
> -
> -static int k210_clk_probe(struct udevice *dev)
> -{
> -	int ret;
> -	struct k210_clk_priv *priv = dev_get_priv(dev);
> -
> -	priv->base = dev_read_addr_ptr(dev_get_parent(dev));
> -	if (!priv->base)
> -		return -EINVAL;
> -
> -	ret = clk_get_by_index(dev, 0, &priv->in0);
> -	if (ret)
> -		return ret;
> -
> -	/*
> -	 * Force setting defaults, even before relocation. This is so we can
> -	 * set the clock rate for PLL1 before we relocate into aisram.
> -	 */
> -	if (!(gd->flags & GD_FLG_RELOC))
> -		clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
> -
> -	return 0;
> -}
> -
> -static const struct udevice_id k210_clk_ids[] = {
> -	{ .compatible = "canaan,k210-clk" },
> -	{ },
> -};
> -
> -U_BOOT_DRIVER(k210_clk) = {
> -	.name = "k210_clk",
> -	.id = UCLASS_CLK,
> -	.of_match = k210_clk_ids,
> -	.ops = &k210_clk_ops,
> -	.probe = k210_clk_probe,
> -	.priv_auto = sizeof(struct k210_clk_priv),
> -};
> -
>   #if IS_ENABLED(CONFIG_CMD_CLK)
>   static char show_enabled(struct k210_clk_priv *priv, int id)
>   {
> @@ -1342,3 +1296,49 @@ int soc_clk_dump(void)
>   	return 0;
>   }
>   #endif
> +
> +static const struct clk_ops k210_clk_ops = {
> +	.request = k210_clk_request,
> +	.set_rate = k210_clk_set_rate,
> +	.get_rate = k210_clk_get_rate,
> +	.set_parent = k210_clk_set_parent,
> +	.enable = k210_clk_enable,
> +	.disable = k210_clk_disable,
> +};
> +
> +static int k210_clk_probe(struct udevice *dev)
> +{
> +	int ret;
> +	struct k210_clk_priv *priv = dev_get_priv(dev);
> +
> +	priv->base = dev_read_addr_ptr(dev_get_parent(dev));
> +	if (!priv->base)
> +		return -EINVAL;
> +
> +	ret = clk_get_by_index(dev, 0, &priv->in0);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * Force setting defaults, even before relocation. This is so we can
> +	 * set the clock rate for PLL1 before we relocate into aisram.
> +	 */
> +	if (!(gd->flags & GD_FLG_RELOC))
> +		clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
> +
> +	return 0;
> +}
> +
> +static const struct udevice_id k210_clk_ids[] = {
> +	{ .compatible = "canaan,k210-clk" },
> +	{ },
> +};
> +
> +U_BOOT_DRIVER(k210_clk) = {
> +	.name = "k210_clk",
> +	.id = UCLASS_CLK,
> +	.of_match = k210_clk_ids,
> +	.ops = &k210_clk_ops,
> +	.probe = k210_clk_probe,
> +	.priv_auto = sizeof(struct k210_clk_priv),
> +};

Reviewed-by: Sean Anderson <seanga2@gmail.com>

[PATCH v4 4/8] clk: amlogic: Move driver and ops structs

[Igor Prusov]

Move driver and ops structs to avoid forward declaration after switching
to dump in clk_ops.

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
---
 drivers/clk/meson/a1.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c
index 1075ba7333..e3fa9db7d0 100644
--- a/drivers/clk/meson/a1.c
+++ b/drivers/clk/meson/a1.c
@@ -601,14 +601,6 @@ static int meson_clk_set_parent(struct clk *clk, struct clk *parent_clk)
 	return meson_mux_set_parent_by_id(clk, parent_clk->id);
 }
 
-static struct clk_ops meson_clk_ops = {
-	.disable	= meson_clk_disable,
-	.enable		= meson_clk_enable,
-	.get_rate	= meson_clk_get_rate,
-	.set_rate	= meson_clk_set_rate,
-	.set_parent	= meson_clk_set_parent,
-};
-
 static int meson_clk_probe(struct udevice *dev)
 {
 	struct meson_clk *priv = dev_get_priv(dev);
@@ -638,15 +630,6 @@ static const struct udevice_id meson_clk_ids[] = {
 	{ }
 };
 
-U_BOOT_DRIVER(meson_clk) = {
-	.name		= "meson-clk-a1",
-	.id		= UCLASS_CLK,
-	.of_match	= meson_clk_ids,
-	.priv_auto	= sizeof(struct meson_clk),
-	.ops		= &meson_clk_ops,
-	.probe		= meson_clk_probe,
-};
-
 static const char *meson_clk_get_name(struct clk *clk, int id)
 {
 	const struct meson_clk_info *info;
@@ -727,3 +710,20 @@ int soc_clk_dump(void)
 
 	return 0;
 }
+
+static struct clk_ops meson_clk_ops = {
+	.disable	= meson_clk_disable,
+	.enable		= meson_clk_enable,
+	.get_rate	= meson_clk_get_rate,
+	.set_rate	= meson_clk_set_rate,
+	.set_parent	= meson_clk_set_parent,
+};
+
+U_BOOT_DRIVER(meson_clk) = {
+	.name		= "meson-clk-a1",
+	.id		= UCLASS_CLK,
+	.of_match	= meson_clk_ids,
+	.priv_auto	= sizeof(struct meson_clk),
+	.ops		= &meson_clk_ops,
+	.probe		= meson_clk_probe,
+};
-- 
2.34.1

Re: [PATCH v4 4/8] clk: amlogic: Move driver and ops structs

[Neil Armstrong]

On 17/10/2023 18:56, Igor Prusov wrote:
> Move driver and ops structs to avoid forward declaration after switching
> to dump in clk_ops.
> 
> Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
> ---
>   drivers/clk/meson/a1.c | 34 +++++++++++++++++-----------------
>   1 file changed, 17 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c
> index 1075ba7333..e3fa9db7d0 100644
> --- a/drivers/clk/meson/a1.c
> +++ b/drivers/clk/meson/a1.c
> @@ -601,14 +601,6 @@ static int meson_clk_set_parent(struct clk *clk, struct clk *parent_clk)
>   	return meson_mux_set_parent_by_id(clk, parent_clk->id);
>   }
>   
> -static struct clk_ops meson_clk_ops = {
> -	.disable	= meson_clk_disable,
> -	.enable		= meson_clk_enable,
> -	.get_rate	= meson_clk_get_rate,
> -	.set_rate	= meson_clk_set_rate,
> -	.set_parent	= meson_clk_set_parent,
> -};
> -
>   static int meson_clk_probe(struct udevice *dev)
>   {
>   	struct meson_clk *priv = dev_get_priv(dev);
> @@ -638,15 +630,6 @@ static const struct udevice_id meson_clk_ids[] = {
>   	{ }
>   };
>   
> -U_BOOT_DRIVER(meson_clk) = {
> -	.name		= "meson-clk-a1",
> -	.id		= UCLASS_CLK,
> -	.of_match	= meson_clk_ids,
> -	.priv_auto	= sizeof(struct meson_clk),
> -	.ops		= &meson_clk_ops,
> -	.probe		= meson_clk_probe,
> -};
> -
>   static const char *meson_clk_get_name(struct clk *clk, int id)
>   {
>   	const struct meson_clk_info *info;
> @@ -727,3 +710,20 @@ int soc_clk_dump(void)
>   
>   	return 0;
>   }
> +
> +static struct clk_ops meson_clk_ops = {
> +	.disable	= meson_clk_disable,
> +	.enable		= meson_clk_enable,
> +	.get_rate	= meson_clk_get_rate,
> +	.set_rate	= meson_clk_set_rate,
> +	.set_parent	= meson_clk_set_parent,
> +};
> +
> +U_BOOT_DRIVER(meson_clk) = {
> +	.name		= "meson-clk-a1",
> +	.id		= UCLASS_CLK,
> +	.of_match	= meson_clk_ids,
> +	.priv_auto	= sizeof(struct meson_clk),
> +	.ops		= &meson_clk_ops,
> +	.probe		= meson_clk_probe,
> +};

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

[PATCH v4 5/8] clk: Add dump operation to clk_ops

[Igor Prusov]

This adds dump function to struct clk_ops which should replace
soc_clk_dump. It allows clock drivers to provide custom dump
implementation without overriding generic CCF dump function.

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
 include/clk-uclass.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/clk-uclass.h b/include/clk-uclass.h
index a22f1a5d84..30621e4823 100644
--- a/include/clk-uclass.h
+++ b/include/clk-uclass.h
@@ -39,6 +39,9 @@ struct clk_ops {
 	int (*set_parent)(struct clk *clk, struct clk *parent);
 	int (*enable)(struct clk *clk);
 	int (*disable)(struct clk *clk);
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	int (*dump)(struct udevice *dev);
+#endif
 };
 
 #if 0 /* For documentation only */
-- 
2.34.1

Re: [PATCH v4 5/8] clk: Add dump operation to clk_ops

[Sean Anderson]

On 10/17/23 12:56, Igor Prusov wrote:
> This adds dump function to struct clk_ops which should replace
> soc_clk_dump. It allows clock drivers to provide custom dump
> implementation without overriding generic CCF dump function.
> 
> Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>   include/clk-uclass.h | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/include/clk-uclass.h b/include/clk-uclass.h
> index a22f1a5d84..30621e4823 100644
> --- a/include/clk-uclass.h
> +++ b/include/clk-uclass.h
> @@ -39,6 +39,9 @@ struct clk_ops {
>   	int (*set_parent)(struct clk *clk, struct clk *parent);
>   	int (*enable)(struct clk *clk);
>   	int (*disable)(struct clk *clk);
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	int (*dump)(struct udevice *dev);
> +#endif
>   };
>   
>   #if 0 /* For documentation only */

Please add documentation.

--Sean

[PATCH v4 6/8] cmd: clk: Use dump function from clk_ops

[Igor Prusov]

Add another loop to dump additional info from clock providers that
implement dump operation.

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
 cmd/clk.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/cmd/clk.c b/cmd/clk.c
index c7c379d7a6..90cc6fa906 100644
--- a/cmd/clk.c
+++ b/cmd/clk.c
@@ -62,6 +62,7 @@ static void show_clks(struct udevice *dev, int depth, int last_flag)
 int __weak soc_clk_dump(void)
 {
 	struct udevice *dev;
+	const struct clk_ops *ops;
 
 	printf(" Rate               Usecnt      Name\n");
 	printf("------------------------------------------\n");
@@ -69,6 +70,14 @@ int __weak soc_clk_dump(void)
 	uclass_foreach_dev_probe(UCLASS_CLK, dev)
 		show_clks(dev, -1, 0);
 
+	uclass_foreach_dev_probe(UCLASS_CLK, dev) {
+		ops = dev_get_driver_ops(dev);
+		if (ops && ops->dump) {
+			printf("--------------------------\n");
+			ops->dump(dev);
+		}
+	}
+
 	return 0;
 }
 #else
-- 
2.34.1

Re: [PATCH v4 6/8] cmd: clk: Use dump function from clk_ops

[Sean Anderson]

On 10/17/23 12:56, Igor Prusov wrote:
> Add another loop to dump additional info from clock providers that
> implement dump operation.
> 
> Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>   cmd/clk.c | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/cmd/clk.c b/cmd/clk.c
> index c7c379d7a6..90cc6fa906 100644
> --- a/cmd/clk.c
> +++ b/cmd/clk.c
> @@ -62,6 +62,7 @@ static void show_clks(struct udevice *dev, int depth, int last_flag)
>   int __weak soc_clk_dump(void)
>   {
>   	struct udevice *dev;
> +	const struct clk_ops *ops;
>   
>   	printf(" Rate               Usecnt      Name\n");
>   	printf("------------------------------------------\n");
> @@ -69,6 +70,14 @@ int __weak soc_clk_dump(void)
>   	uclass_foreach_dev_probe(UCLASS_CLK, dev)
>   		show_clks(dev, -1, 0);
>   
> +	uclass_foreach_dev_probe(UCLASS_CLK, dev) {
> +		ops = dev_get_driver_ops(dev);
> +		if (ops && ops->dump) {
> +			printf("--------------------------\n");
> +			ops->dump(dev);
> +		}
> +	}
> +
>   	return 0;
>   }
>   #else

So this produces output like

=> clk dump
  Rate               Usecnt      Name
------------------------------------------
  26000000             0        |-- osc
--------------------------
  Rate      Enabled Name
------------------------
  26000000  y       osc
  780000000 y           pll0
  390000000 -               aclk
  390000000 y                   cpu
  390000000 y                   sram0
  390000000 y                   sram1
  7800000   -                   clint
  195000000 y                   apb0
  195000000 y                       gpio
  195000000 y                       uart1
  195000000 y                       uart2
  195000000 y                       uart3
  195000000 y                       fpioa
  195000000 y                       sha
  195000000 y                   apb1
  195000000 y                       aes
  195000000 y                       otp
  195000000 y                   apb2
  195000000 y                   rom
  390000000 y                   dma
  390000000 y                   dvp
  390000000 y                   fft
  390000000 y               spi0
  390000000 y               spi1
  390000000 y               spi2
  97500000  y               spi3
  390000000 y               i2c0
  390000000 y               i2c1
  390000000 y               i2c2
  390000000 y               timer0
  390000000 y               timer1
  390000000 y               timer2
  390000000 y           pll1
  390000000 y               ai
  0         n           pll2
  0         y               i2s0
  0         y               i2s1
  0         y               i2s2
  0         -               i2s0_m
  0         -               i2s1_m
  0         -               i2s2_m
  13000000  y           wdt0
  13000000  n           wdt1
  26000000  n           rtc

And TBH I don't think it's particularly clear (at least at a glance) where
one clock ends and another begins. I think something like

diff --git i/cmd/clk.c w/cmd/clk.c
index f55911db7a3..7bbcbfeda33 100644
--- i/cmd/clk.c
+++ w/cmd/clk.c
@@ -73,7 +73,7 @@ static int soc_clk_dump(void)
         uclass_foreach_dev_probe(UCLASS_CLK, dev) {
                 ops = dev_get_driver_ops(dev);
                 if (ops && ops->dump) {
-                       printf("--------------------------\n");
+                       printf("\n%s %s:\n", dev->driver->name, dev->name);
                         ops->dump(dev);
                 }
         }

would work a lot better. This produces an output like

=> clk dump
  Rate               Usecnt      Name
------------------------------------------
  26000000             0        |-- osc

k210_clk clock-controller:
  Rate      Enabled Name
------------------------
  26000000  y       osc
  780000000 y           pll0
  390000000 -               aclk
  390000000 y                   cpu
  390000000 y                   sram0
  390000000 y                   sram1
</snip>

which I think makes it clearer that we have a new clock tree getting dumped.

This also doesn't really address multiple interacting clock trees (such as
e.g. if I had another clock derived from a k210_clk in the above example)
but at least it's a start.

--Sean

[PATCH v4 7/8] clk: treewide: switch to clock dump from clk_ops

[Igor Prusov]

Switch to using new dump operation in clock provider drivers instead of
overriding soc_clk_dump.

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
 arch/mips/mach-pic32/cpu.c             | 23 ---------------
 drivers/clk/aspeed/clk_ast2600.c       | 13 ++++-----
 drivers/clk/clk_k210.c                 | 11 +++-----
 drivers/clk/clk_pic32.c                | 39 ++++++++++++++++++++++++++
 drivers/clk/clk_versal.c               |  7 ++++-
 drivers/clk/clk_zynq.c                 | 19 ++++---------
 drivers/clk/clk_zynqmp.c               | 13 ++++-----
 drivers/clk/imx/clk-imx8.c             | 11 +++-----
 drivers/clk/meson/a1.c                 | 24 ++++------------
 drivers/clk/mvebu/armada-37xx-periph.c |  5 +++-
 drivers/clk/stm32/clk-stm32mp1.c       | 29 ++++++-------------
 11 files changed, 89 insertions(+), 105 deletions(-)

diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c
index 7ed306e045..68099dd02f 100644
--- a/arch/mips/mach-pic32/cpu.c
+++ b/arch/mips/mach-pic32/cpu.c
@@ -144,26 +144,3 @@ const char *get_core_name(void)
 	return str;
 }
 #endif
-#ifdef CONFIG_CMD_CLK
-
-int soc_clk_dump(void)
-{
-	int i;
-
-	printf("PLL Speed: %lu MHz\n",
-	       CLK_MHZ(rate(PLLCLK)));
-
-	printf("CPU Speed: %lu MHz\n", CLK_MHZ(rate(PB7CLK)));
-
-	printf("MPLL Speed: %lu MHz\n", CLK_MHZ(rate(MPLL)));
-
-	for (i = PB1CLK; i <= PB7CLK; i++)
-		printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1,
-		       CLK_MHZ(rate(i)));
-
-	for (i = REF1CLK; i <= REF5CLK; i++)
-		printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,
-		       CLK_MHZ(rate(i)));
-	return 0;
-}
-#endif
diff --git a/drivers/clk/aspeed/clk_ast2600.c b/drivers/clk/aspeed/clk_ast2600.c
index b3cc8392fa..e1365d3f81 100644
--- a/drivers/clk/aspeed/clk_ast2600.c
+++ b/drivers/clk/aspeed/clk_ast2600.c
@@ -1109,6 +1109,7 @@ struct aspeed_clks {
 	const char *name;
 };
 
+#if IS_ENABLED(CONFIG_CMD_CLK)
 static struct aspeed_clks aspeed_clk_names[] = {
 	{ ASPEED_CLK_HPLL, "hpll" },
 	{ ASPEED_CLK_MPLL, "mpll" },
@@ -1123,18 +1124,12 @@ static struct aspeed_clks aspeed_clk_names[] = {
 	{ ASPEED_CLK_HUARTX, "huxclk" },
 };
 
-int soc_clk_dump(void)
+static int ast2600_clk_dump(struct udevice *dev)
 {
-	struct udevice *dev;
 	struct clk clk;
 	unsigned long rate;
 	int i, ret;
 
-	ret = uclass_get_device_by_driver(UCLASS_CLK, DM_DRIVER_GET(aspeed_scu),
-					  &dev);
-	if (ret)
-		return ret;
-
 	printf("Clk\t\tHz\n");
 
 	for (i = 0; i < ARRAY_SIZE(aspeed_clk_names); i++) {
@@ -1167,11 +1162,15 @@ int soc_clk_dump(void)
 
 	return 0;
 }
+#endif
 
 struct clk_ops ast2600_clk_ops = {
 	.get_rate = ast2600_clk_get_rate,
 	.set_rate = ast2600_clk_set_rate,
 	.enable = ast2600_clk_enable,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump = ast2600_clk_dump,
+#endif
 };
 
 static int ast2600_clk_probe(struct udevice *dev)
diff --git a/drivers/clk/clk_k210.c b/drivers/clk/clk_k210.c
index 2f17152021..058940b828 100644
--- a/drivers/clk/clk_k210.c
+++ b/drivers/clk/clk_k210.c
@@ -1276,16 +1276,10 @@ static void show_clks(struct k210_clk_priv *priv, int id, int depth)
 	}
 }
 
-int soc_clk_dump(void)
+static int k210_clk_dump(struct udevice *dev)
 {
-	int ret;
-	struct udevice *dev;
 	struct k210_clk_priv *priv;
 
-	ret = uclass_get_device_by_driver(UCLASS_CLK, DM_DRIVER_GET(k210_clk),
-					  &dev);
-	if (ret)
-		return ret;
 	priv = dev_get_priv(dev);
 
 	puts(" Rate      Enabled Name\n");
@@ -1304,6 +1298,9 @@ static const struct clk_ops k210_clk_ops = {
 	.set_parent = k210_clk_set_parent,
 	.enable = k210_clk_enable,
 	.disable = k210_clk_disable,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump = k210_clk_dump,
+#endif
 };
 
 static int k210_clk_probe(struct udevice *dev)
diff --git a/drivers/clk/clk_pic32.c b/drivers/clk/clk_pic32.c
index ef06a7fb9f..f756fc88f0 100644
--- a/drivers/clk/clk_pic32.c
+++ b/drivers/clk/clk_pic32.c
@@ -20,6 +20,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define CLK_MHZ(x)	((x) / 1000000)
+
 /* Primary oscillator */
 #define SYS_POSC_CLK_HZ	24000000
 
@@ -385,9 +387,46 @@ static ulong pic32_set_rate(struct clk *clk, ulong rate)
 	return rate;
 }
 
+#if IS_ENABLED(CONFIG_CMD_CLK)
+static int pic32_dump(struct udevice *dev)
+{
+	int i;
+	struct clk clk;
+
+	clk.dev = dev;
+
+	clk.id = PLLCLK;
+	printf("PLL Speed: %lu MHz\n",
+	       CLK_MHZ(pic32_get_rate(&clk)));
+
+	clk.id = PB7CLK;
+	printf("CPU Speed: %lu MHz\n", CLK_MHZ(pic32_get_rate(&clk)));
+
+	clk.id = MPLL;
+	printf("MPLL Speed: %lu MHz\n", CLK_MHZ(pic32_get_rate(&clk)));
+
+	for (i = PB1CLK; i <= PB7CLK; i++) {
+		clk.id = i;
+		printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1,
+		       CLK_MHZ(pic32_get_rate(&clk)));
+	}
+
+	for (i = REF1CLK; i <= REF5CLK; i++) {
+		clk.id = i;
+		printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,
+		       CLK_MHZ(pic32_get_rate(&clk)));
+	}
+
+	return 0;
+}
+#endif
+
 static struct clk_ops pic32_pic32_clk_ops = {
 	.set_rate = pic32_set_rate,
 	.get_rate = pic32_get_rate,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump = pic32_dump,
+#endif
 };
 
 static int pic32_clk_probe(struct udevice *dev)
diff --git a/drivers/clk/clk_versal.c b/drivers/clk/clk_versal.c
index c473643603..f3fafec7f7 100644
--- a/drivers/clk/clk_versal.c
+++ b/drivers/clk/clk_versal.c
@@ -555,7 +555,8 @@ static int versal_clock_get_rate(u32 clk_id, u64 *clk_rate)
 	return 0;
 }
 
-int soc_clk_dump(void)
+#if IS_ENABLED(CONFIG_CMD_CLK)
+static int versal_clk_dump(struct udevice __always_unused *dev)
 {
 	u64 clk_rate = 0;
 	u32 type, ret, i = 0;
@@ -578,6 +579,7 @@ int soc_clk_dump(void)
 
 	return 0;
 }
+#endif
 
 static void versal_get_clock_info(void)
 {
@@ -769,6 +771,9 @@ static struct clk_ops versal_clk_ops = {
 	.set_rate = versal_clk_set_rate,
 	.get_rate = versal_clk_get_rate,
 	.enable = versal_clk_enable,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump = versal_clk_dump,
+#endif
 };
 
 static const struct udevice_id versal_clk_ids[] = {
diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c
index be5226175f..d492eea3b0 100644
--- a/drivers/clk/clk_zynq.c
+++ b/drivers/clk/clk_zynq.c
@@ -454,6 +454,7 @@ static int dummy_enable(struct clk *clk)
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_CMD_CLK)
 static const char * const clk_names[clk_max] = {
 	"armpll", "ddrpll", "iopll",
 	"cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
@@ -468,22 +469,10 @@ static const char * const clk_names[clk_max] = {
 	"smc_aper", "swdt", "dbg_trc", "dbg_apb"
 };
 
-/**
- * soc_clk_dump() - Print clock frequencies
- * Returns zero on success
- *
- * Implementation for the clk dump command.
- */
-int soc_clk_dump(void)
+static int zynq_clk_dump(struct udevice *dev)
 {
-	struct udevice *dev;
 	int i, ret;
 
-	ret = uclass_get_device_by_driver(UCLASS_CLK,
-					  DM_DRIVER_GET(zynq_clk), &dev);
-	if (ret)
-		return ret;
-
 	printf("clk\t\tfrequency\n");
 	for (i = 0; i < clk_max; i++) {
 		const char *name = clk_names[i];
@@ -511,6 +500,7 @@ int soc_clk_dump(void)
 
 	return 0;
 }
+#endif
 
 static struct clk_ops zynq_clk_ops = {
 	.get_rate = zynq_clk_get_rate,
@@ -518,6 +508,9 @@ static struct clk_ops zynq_clk_ops = {
 	.set_rate = zynq_clk_set_rate,
 #endif
 	.enable = dummy_enable,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump = zynq_clk_dump,
+#endif
 };
 
 static int zynq_clk_probe(struct udevice *dev)
diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c
index 1cfe0e25b1..dfcda429c7 100644
--- a/drivers/clk/clk_zynqmp.c
+++ b/drivers/clk/clk_zynqmp.c
@@ -735,16 +735,11 @@ static ulong zynqmp_clk_set_rate(struct clk *clk, ulong rate)
 	}
 }
 
-int soc_clk_dump(void)
+#if IS_ENABLED(CONFIG_CMD_CLK)
+static int zynqmp_clk_dump(struct udevice *dev)
 {
-	struct udevice *dev;
 	int i, ret;
 
-	ret = uclass_get_device_by_driver(UCLASS_CLK,
-		DM_DRIVER_GET(zynqmp_clk), &dev);
-	if (ret)
-		return ret;
-
 	printf("clk\t\tfrequency\n");
 	for (i = 0; i < clk_max; i++) {
 		const char *name = clk_names[i];
@@ -772,6 +767,7 @@ int soc_clk_dump(void)
 
 	return 0;
 }
+#endif
 
 static int zynqmp_get_freq_by_name(char *name, struct udevice *dev, ulong *freq)
 {
@@ -871,6 +867,9 @@ static struct clk_ops zynqmp_clk_ops = {
 	.set_rate = zynqmp_clk_set_rate,
 	.get_rate = zynqmp_clk_get_rate,
 	.enable = zynqmp_clk_enable,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump = zynqmp_clk_dump,
+#endif
 };
 
 static const struct udevice_id zynqmp_clk_ids[] = {
diff --git a/drivers/clk/imx/clk-imx8.c b/drivers/clk/imx/clk-imx8.c
index ceeead3434..6cd55f4369 100644
--- a/drivers/clk/imx/clk-imx8.c
+++ b/drivers/clk/imx/clk-imx8.c
@@ -43,18 +43,12 @@ static int imx8_clk_enable(struct clk *clk)
 }
 
 #if IS_ENABLED(CONFIG_CMD_CLK)
-int soc_clk_dump(void)
+static int imx8_clk_dump(struct udevice *dev)
 {
-	struct udevice *dev;
 	struct clk clk;
 	unsigned long rate;
 	int i, ret;
 
-	ret = uclass_get_device_by_driver(UCLASS_CLK,
-					  DM_DRIVER_GET(imx8_clk), &dev);
-	if (ret)
-		return ret;
-
 	printf("Clk\t\tHz\n");
 
 	for (i = 0; i < num_clks; i++) {
@@ -94,6 +88,9 @@ static struct clk_ops imx8_clk_ops = {
 	.get_rate = imx8_clk_get_rate,
 	.enable = imx8_clk_enable,
 	.disable = imx8_clk_disable,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump = imx8_clk_dump,
+#endif
 };
 
 static int imx8_clk_probe(struct udevice *dev)
diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c
index e3fa9db7d0..1820b31ff7 100644
--- a/drivers/clk/meson/a1.c
+++ b/drivers/clk/meson/a1.c
@@ -639,7 +639,7 @@ static const char *meson_clk_get_name(struct clk *clk, int id)
 	return IS_ERR(info) ? "unknown" : info->name;
 }
 
-static int meson_clk_dump(struct clk *clk)
+static int meson_clk_dump_single(struct clk *clk)
 {
 	const struct meson_clk_info *info;
 	struct meson_clk *priv;
@@ -674,7 +674,7 @@ static int meson_clk_dump(struct clk *clk)
 	return 0;
 }
 
-static int meson_clk_dump_dev(struct udevice *dev)
+static int meson_clk_dump(struct udevice *dev)
 {
 	int i;
 	struct meson_clk_data *data;
@@ -687,7 +687,7 @@ static int meson_clk_dump_dev(struct udevice *dev)
 
 	data = (struct meson_clk_data *)dev_get_driver_data(dev);
 	for (i = 0; i < data->num_clocks; i++) {
-		meson_clk_dump(&(struct clk){
+		meson_clk_dump_single(&(struct clk){
 			.dev = dev,
 			.id = i
 		});
@@ -696,27 +696,15 @@ static int meson_clk_dump_dev(struct udevice *dev)
 	return 0;
 }
 
-int soc_clk_dump(void)
-{
-	struct udevice *dev;
-	int i = 0;
-
-	while (!uclass_get_device(UCLASS_CLK, i++, &dev)) {
-		if (dev->driver == DM_DRIVER_GET(meson_clk)) {
-			meson_clk_dump_dev(dev);
-			printf("\n");
-		}
-	}
-
-	return 0;
-}
-
 static struct clk_ops meson_clk_ops = {
 	.disable	= meson_clk_disable,
 	.enable		= meson_clk_enable,
 	.get_rate	= meson_clk_get_rate,
 	.set_rate	= meson_clk_set_rate,
 	.set_parent	= meson_clk_set_parent,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump		= meson_clk_dump,
+#endif
 };
 
 U_BOOT_DRIVER(meson_clk) = {
diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c
index e75052f383..faf75c8792 100644
--- a/drivers/clk/mvebu/armada-37xx-periph.c
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
@@ -499,7 +499,7 @@ static int clk_dump(const char *name, int (*func)(struct udevice *))
 
 int armada_37xx_tbg_clk_dump(struct udevice *);
 
-int soc_clk_dump(void)
+static int armada37xx_clk_dump(struct udevice __always_unused *dev)
 {
 	printf("  xtal at %u000000 Hz\n\n", get_ref_clk());
 
@@ -605,6 +605,9 @@ static const struct clk_ops armada_37xx_periph_clk_ops = {
 	.set_parent = armada_37xx_periph_clk_set_parent,
 	.enable = armada_37xx_periph_clk_enable,
 	.disable = armada_37xx_periph_clk_disable,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump = armada37xx_clk_dump,
+#endif
 };
 
 static const struct udevice_id armada_37xx_periph_clk_ids[] = {
diff --git a/drivers/clk/stm32/clk-stm32mp1.c b/drivers/clk/stm32/clk-stm32mp1.c
index f3ac8c7583..f78540ad1d 100644
--- a/drivers/clk/stm32/clk-stm32mp1.c
+++ b/drivers/clk/stm32/clk-stm32mp1.c
@@ -2225,10 +2225,13 @@ static void stm32mp1_osc_init(struct udevice *dev)
 	}
 }
 
-static void  __maybe_unused stm32mp1_clk_dump(struct stm32mp1_clk_priv *priv)
+static int __maybe_unused stm32mp1_clk_dump(struct udevice *dev)
 {
 	char buf[32];
 	int i, s, p;
+	struct stm32mp1_clk_priv *priv;
+
+	priv = dev_get_priv(dev);
 
 	printf("Clocks:\n");
 	for (i = 0; i < _PARENT_NB; i++) {
@@ -2250,28 +2253,9 @@ static void  __maybe_unused stm32mp1_clk_dump(struct stm32mp1_clk_priv *priv)
 			       stm32mp1_clk_parent_sel_name[i], i, p);
 		}
 	}
-}
-
-#ifdef CONFIG_CMD_CLK
-int soc_clk_dump(void)
-{
-	struct udevice *dev;
-	struct stm32mp1_clk_priv *priv;
-	int ret;
-
-	ret = uclass_get_device_by_driver(UCLASS_CLK,
-					  DM_DRIVER_GET(stm32mp1_clock),
-					  &dev);
-	if (ret)
-		return ret;
-
-	priv = dev_get_priv(dev);
-
-	stm32mp1_clk_dump(priv);
 
 	return 0;
 }
-#endif
 
 static int stm32mp1_clk_probe(struct udevice *dev)
 {
@@ -2302,7 +2286,7 @@ static int stm32mp1_clk_probe(struct udevice *dev)
 #if defined(VERBOSE_DEBUG)
 	/* display debug information for probe after relocation */
 	if (gd->flags & GD_FLG_RELOC)
-		stm32mp1_clk_dump(priv);
+		stm32mp1_clk_dump(dev);
 #endif
 
 	gd->cpu_clk = stm32mp1_clk_get(priv, _CK_MPU);
@@ -2333,6 +2317,9 @@ static const struct clk_ops stm32mp1_clk_ops = {
 	.disable = stm32mp1_clk_disable,
 	.get_rate = stm32mp1_clk_get_rate,
 	.set_rate = stm32mp1_clk_set_rate,
+#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_SPL_BUILD)
+	.dump = stm32mp1_clk_dump,
+#endif
 };
 
 U_BOOT_DRIVER(stm32mp1_clock) = {
-- 
2.34.1

Re: [PATCH v4 7/8] clk: treewide: switch to clock dump from clk_ops

[Sean Anderson]

On 10/17/23 12:56, Igor Prusov wrote:
> Switch to using new dump operation in clock provider drivers instead of
> overriding soc_clk_dump.
> 
> Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>   arch/mips/mach-pic32/cpu.c             | 23 ---------------
>   drivers/clk/aspeed/clk_ast2600.c       | 13 ++++-----
>   drivers/clk/clk_k210.c                 | 11 +++-----
>   drivers/clk/clk_pic32.c                | 39 ++++++++++++++++++++++++++
>   drivers/clk/clk_versal.c               |  7 ++++-
>   drivers/clk/clk_zynq.c                 | 19 ++++---------
>   drivers/clk/clk_zynqmp.c               | 13 ++++-----
>   drivers/clk/imx/clk-imx8.c             | 11 +++-----
>   drivers/clk/meson/a1.c                 | 24 ++++------------
>   drivers/clk/mvebu/armada-37xx-periph.c |  5 +++-
>   drivers/clk/stm32/clk-stm32mp1.c       | 29 ++++++-------------
>   11 files changed, 89 insertions(+), 105 deletions(-)
> 
> diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c
> index 7ed306e045..68099dd02f 100644
> --- a/arch/mips/mach-pic32/cpu.c
> +++ b/arch/mips/mach-pic32/cpu.c
> @@ -144,26 +144,3 @@ const char *get_core_name(void)
>   	return str;
>   }
>   #endif
> -#ifdef CONFIG_CMD_CLK
> -
> -int soc_clk_dump(void)
> -{
> -	int i;
> -
> -	printf("PLL Speed: %lu MHz\n",
> -	       CLK_MHZ(rate(PLLCLK)));
> -
> -	printf("CPU Speed: %lu MHz\n", CLK_MHZ(rate(PB7CLK)));
> -
> -	printf("MPLL Speed: %lu MHz\n", CLK_MHZ(rate(MPLL)));
> -
> -	for (i = PB1CLK; i <= PB7CLK; i++)
> -		printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1,
> -		       CLK_MHZ(rate(i)));
> -
> -	for (i = REF1CLK; i <= REF5CLK; i++)
> -		printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,
> -		       CLK_MHZ(rate(i)));
> -	return 0;
> -}
> -#endif
> diff --git a/drivers/clk/aspeed/clk_ast2600.c b/drivers/clk/aspeed/clk_ast2600.c
> index b3cc8392fa..e1365d3f81 100644
> --- a/drivers/clk/aspeed/clk_ast2600.c
> +++ b/drivers/clk/aspeed/clk_ast2600.c
> @@ -1109,6 +1109,7 @@ struct aspeed_clks {
>   	const char *name;
>   };
>   
> +#if IS_ENABLED(CONFIG_CMD_CLK)
>   static struct aspeed_clks aspeed_clk_names[] = {
>   	{ ASPEED_CLK_HPLL, "hpll" },
>   	{ ASPEED_CLK_MPLL, "mpll" },
> @@ -1123,18 +1124,12 @@ static struct aspeed_clks aspeed_clk_names[] = {
>   	{ ASPEED_CLK_HUARTX, "huxclk" },
>   };
>   
> -int soc_clk_dump(void)
> +static int ast2600_clk_dump(struct udevice *dev)
>   {
> -	struct udevice *dev;
>   	struct clk clk;
>   	unsigned long rate;
>   	int i, ret;
>   
> -	ret = uclass_get_device_by_driver(UCLASS_CLK, DM_DRIVER_GET(aspeed_scu),
> -					  &dev);
> -	if (ret)
> -		return ret;
> -
>   	printf("Clk\t\tHz\n");
>   
>   	for (i = 0; i < ARRAY_SIZE(aspeed_clk_names); i++) {
> @@ -1167,11 +1162,15 @@ int soc_clk_dump(void)
>   
>   	return 0;
>   }
> +#endif
>   
>   struct clk_ops ast2600_clk_ops = {
>   	.get_rate = ast2600_clk_get_rate,
>   	.set_rate = ast2600_clk_set_rate,
>   	.enable = ast2600_clk_enable,
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	.dump = ast2600_clk_dump,
> +#endif
>   };
>   
>   static int ast2600_clk_probe(struct udevice *dev)
> diff --git a/drivers/clk/clk_k210.c b/drivers/clk/clk_k210.c
> index 2f17152021..058940b828 100644
> --- a/drivers/clk/clk_k210.c
> +++ b/drivers/clk/clk_k210.c
> @@ -1276,16 +1276,10 @@ static void show_clks(struct k210_clk_priv *priv, int id, int depth)
>   	}
>   }
>   
> -int soc_clk_dump(void)
> +static int k210_clk_dump(struct udevice *dev)
>   {
> -	int ret;
> -	struct udevice *dev;
>   	struct k210_clk_priv *priv;
>   
> -	ret = uclass_get_device_by_driver(UCLASS_CLK, DM_DRIVER_GET(k210_clk),
> -					  &dev);
> -	if (ret)
> -		return ret;
>   	priv = dev_get_priv(dev);
>   
>   	puts(" Rate      Enabled Name\n");
> @@ -1304,6 +1298,9 @@ static const struct clk_ops k210_clk_ops = {
>   	.set_parent = k210_clk_set_parent,
>   	.enable = k210_clk_enable,
>   	.disable = k210_clk_disable,
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	.dump = k210_clk_dump,
> +#endif
>   };
>   
>   static int k210_clk_probe(struct udevice *dev)
> diff --git a/drivers/clk/clk_pic32.c b/drivers/clk/clk_pic32.c
> index ef06a7fb9f..f756fc88f0 100644
> --- a/drivers/clk/clk_pic32.c
> +++ b/drivers/clk/clk_pic32.c
> @@ -20,6 +20,8 @@
>   
>   DECLARE_GLOBAL_DATA_PTR;
>   
> +#define CLK_MHZ(x)	((x) / 1000000)
> +
>   /* Primary oscillator */
>   #define SYS_POSC_CLK_HZ	24000000
>   
> @@ -385,9 +387,46 @@ static ulong pic32_set_rate(struct clk *clk, ulong rate)
>   	return rate;
>   }
>   
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +static int pic32_dump(struct udevice *dev)
> +{
> +	int i;
> +	struct clk clk;
> +
> +	clk.dev = dev;
> +
> +	clk.id = PLLCLK;
> +	printf("PLL Speed: %lu MHz\n",
> +	       CLK_MHZ(pic32_get_rate(&clk)));
> +
> +	clk.id = PB7CLK;
> +	printf("CPU Speed: %lu MHz\n", CLK_MHZ(pic32_get_rate(&clk)));
> +
> +	clk.id = MPLL;
> +	printf("MPLL Speed: %lu MHz\n", CLK_MHZ(pic32_get_rate(&clk)));
> +
> +	for (i = PB1CLK; i <= PB7CLK; i++) {
> +		clk.id = i;
> +		printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1,
> +		       CLK_MHZ(pic32_get_rate(&clk)));
> +	}
> +
> +	for (i = REF1CLK; i <= REF5CLK; i++) {
> +		clk.id = i;
> +		printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,
> +		       CLK_MHZ(pic32_get_rate(&clk)));
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
>   static struct clk_ops pic32_pic32_clk_ops = {
>   	.set_rate = pic32_set_rate,
>   	.get_rate = pic32_get_rate,
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	.dump = pic32_dump,
> +#endif
>   };
>   
>   static int pic32_clk_probe(struct udevice *dev)
> diff --git a/drivers/clk/clk_versal.c b/drivers/clk/clk_versal.c
> index c473643603..f3fafec7f7 100644
> --- a/drivers/clk/clk_versal.c
> +++ b/drivers/clk/clk_versal.c
> @@ -555,7 +555,8 @@ static int versal_clock_get_rate(u32 clk_id, u64 *clk_rate)
>   	return 0;
>   }
>   
> -int soc_clk_dump(void)
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +static int versal_clk_dump(struct udevice __always_unused *dev)
>   {
>   	u64 clk_rate = 0;
>   	u32 type, ret, i = 0;
> @@ -578,6 +579,7 @@ int soc_clk_dump(void)
>   
>   	return 0;
>   }
> +#endif
>   
>   static void versal_get_clock_info(void)
>   {
> @@ -769,6 +771,9 @@ static struct clk_ops versal_clk_ops = {
>   	.set_rate = versal_clk_set_rate,
>   	.get_rate = versal_clk_get_rate,
>   	.enable = versal_clk_enable,
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	.dump = versal_clk_dump,
> +#endif
>   };
>   
>   static const struct udevice_id versal_clk_ids[] = {
> diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c
> index be5226175f..d492eea3b0 100644
> --- a/drivers/clk/clk_zynq.c
> +++ b/drivers/clk/clk_zynq.c
> @@ -454,6 +454,7 @@ static int dummy_enable(struct clk *clk)
>   	return 0;
>   }
>   
> +#if IS_ENABLED(CONFIG_CMD_CLK)
>   static const char * const clk_names[clk_max] = {
>   	"armpll", "ddrpll", "iopll",
>   	"cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
> @@ -468,22 +469,10 @@ static const char * const clk_names[clk_max] = {
>   	"smc_aper", "swdt", "dbg_trc", "dbg_apb"
>   };
>   
> -/**
> - * soc_clk_dump() - Print clock frequencies
> - * Returns zero on success
> - *
> - * Implementation for the clk dump command.
> - */
> -int soc_clk_dump(void)
> +static int zynq_clk_dump(struct udevice *dev)
>   {
> -	struct udevice *dev;
>   	int i, ret;
>   
> -	ret = uclass_get_device_by_driver(UCLASS_CLK,
> -					  DM_DRIVER_GET(zynq_clk), &dev);
> -	if (ret)
> -		return ret;
> -
>   	printf("clk\t\tfrequency\n");
>   	for (i = 0; i < clk_max; i++) {
>   		const char *name = clk_names[i];
> @@ -511,6 +500,7 @@ int soc_clk_dump(void)
>   
>   	return 0;
>   }
> +#endif
>   
>   static struct clk_ops zynq_clk_ops = {
>   	.get_rate = zynq_clk_get_rate,
> @@ -518,6 +508,9 @@ static struct clk_ops zynq_clk_ops = {
>   	.set_rate = zynq_clk_set_rate,
>   #endif
>   	.enable = dummy_enable,
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	.dump = zynq_clk_dump,
> +#endif
>   };
>   
>   static int zynq_clk_probe(struct udevice *dev)
> diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c
> index 1cfe0e25b1..dfcda429c7 100644
> --- a/drivers/clk/clk_zynqmp.c
> +++ b/drivers/clk/clk_zynqmp.c
> @@ -735,16 +735,11 @@ static ulong zynqmp_clk_set_rate(struct clk *clk, ulong rate)
>   	}
>   }
>   
> -int soc_clk_dump(void)
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +static int zynqmp_clk_dump(struct udevice *dev)
>   {
> -	struct udevice *dev;
>   	int i, ret;
>   
> -	ret = uclass_get_device_by_driver(UCLASS_CLK,
> -		DM_DRIVER_GET(zynqmp_clk), &dev);
> -	if (ret)
> -		return ret;
> -
>   	printf("clk\t\tfrequency\n");
>   	for (i = 0; i < clk_max; i++) {
>   		const char *name = clk_names[i];
> @@ -772,6 +767,7 @@ int soc_clk_dump(void)
>   
>   	return 0;
>   }
> +#endif
>   
>   static int zynqmp_get_freq_by_name(char *name, struct udevice *dev, ulong *freq)
>   {
> @@ -871,6 +867,9 @@ static struct clk_ops zynqmp_clk_ops = {
>   	.set_rate = zynqmp_clk_set_rate,
>   	.get_rate = zynqmp_clk_get_rate,
>   	.enable = zynqmp_clk_enable,
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	.dump = zynqmp_clk_dump,
> +#endif
>   };
>   
>   static const struct udevice_id zynqmp_clk_ids[] = {
> diff --git a/drivers/clk/imx/clk-imx8.c b/drivers/clk/imx/clk-imx8.c
> index ceeead3434..6cd55f4369 100644
> --- a/drivers/clk/imx/clk-imx8.c
> +++ b/drivers/clk/imx/clk-imx8.c
> @@ -43,18 +43,12 @@ static int imx8_clk_enable(struct clk *clk)
>   }
>   
>   #if IS_ENABLED(CONFIG_CMD_CLK)
> -int soc_clk_dump(void)
> +static int imx8_clk_dump(struct udevice *dev)
>   {
> -	struct udevice *dev;
>   	struct clk clk;
>   	unsigned long rate;
>   	int i, ret;
>   
> -	ret = uclass_get_device_by_driver(UCLASS_CLK,
> -					  DM_DRIVER_GET(imx8_clk), &dev);
> -	if (ret)
> -		return ret;
> -
>   	printf("Clk\t\tHz\n");
>   
>   	for (i = 0; i < num_clks; i++) {
> @@ -94,6 +88,9 @@ static struct clk_ops imx8_clk_ops = {
>   	.get_rate = imx8_clk_get_rate,
>   	.enable = imx8_clk_enable,
>   	.disable = imx8_clk_disable,
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	.dump = imx8_clk_dump,
> +#endif
>   };
>   
>   static int imx8_clk_probe(struct udevice *dev)
> diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c
> index e3fa9db7d0..1820b31ff7 100644
> --- a/drivers/clk/meson/a1.c
> +++ b/drivers/clk/meson/a1.c
> @@ -639,7 +639,7 @@ static const char *meson_clk_get_name(struct clk *clk, int id)
>   	return IS_ERR(info) ? "unknown" : info->name;
>   }
>   
> -static int meson_clk_dump(struct clk *clk)
> +static int meson_clk_dump_single(struct clk *clk)
>   {
>   	const struct meson_clk_info *info;
>   	struct meson_clk *priv;
> @@ -674,7 +674,7 @@ static int meson_clk_dump(struct clk *clk)
>   	return 0;
>   }
>   
> -static int meson_clk_dump_dev(struct udevice *dev)
> +static int meson_clk_dump(struct udevice *dev)
>   {
>   	int i;
>   	struct meson_clk_data *data;
> @@ -687,7 +687,7 @@ static int meson_clk_dump_dev(struct udevice *dev)
>   
>   	data = (struct meson_clk_data *)dev_get_driver_data(dev);
>   	for (i = 0; i < data->num_clocks; i++) {
> -		meson_clk_dump(&(struct clk){
> +		meson_clk_dump_single(&(struct clk){
>   			.dev = dev,
>   			.id = i
>   		});
> @@ -696,27 +696,15 @@ static int meson_clk_dump_dev(struct udevice *dev)
>   	return 0;
>   }
>   
> -int soc_clk_dump(void)
> -{
> -	struct udevice *dev;
> -	int i = 0;
> -
> -	while (!uclass_get_device(UCLASS_CLK, i++, &dev)) {
> -		if (dev->driver == DM_DRIVER_GET(meson_clk)) {
> -			meson_clk_dump_dev(dev);
> -			printf("\n");
> -		}
> -	}
> -
> -	return 0;
> -}
> -
>   static struct clk_ops meson_clk_ops = {
>   	.disable	= meson_clk_disable,
>   	.enable		= meson_clk_enable,
>   	.get_rate	= meson_clk_get_rate,
>   	.set_rate	= meson_clk_set_rate,
>   	.set_parent	= meson_clk_set_parent,
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	.dump		= meson_clk_dump,
> +#endif
>   };
>   
>   U_BOOT_DRIVER(meson_clk) = {
> diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c
> index e75052f383..faf75c8792 100644
> --- a/drivers/clk/mvebu/armada-37xx-periph.c
> +++ b/drivers/clk/mvebu/armada-37xx-periph.c
> @@ -499,7 +499,7 @@ static int clk_dump(const char *name, int (*func)(struct udevice *))
>   
>   int armada_37xx_tbg_clk_dump(struct udevice *);
>   
> -int soc_clk_dump(void)
> +static int armada37xx_clk_dump(struct udevice __always_unused *dev)
>   {
>   	printf("  xtal at %u000000 Hz\n\n", get_ref_clk());
>   
> @@ -605,6 +605,9 @@ static const struct clk_ops armada_37xx_periph_clk_ops = {
>   	.set_parent = armada_37xx_periph_clk_set_parent,
>   	.enable = armada_37xx_periph_clk_enable,
>   	.disable = armada_37xx_periph_clk_disable,
> +#if IS_ENABLED(CONFIG_CMD_CLK)
> +	.dump = armada37xx_clk_dump,
> +#endif
>   };
>   
>   static const struct udevice_id armada_37xx_periph_clk_ids[] = {
> diff --git a/drivers/clk/stm32/clk-stm32mp1.c b/drivers/clk/stm32/clk-stm32mp1.c
> index f3ac8c7583..f78540ad1d 100644
> --- a/drivers/clk/stm32/clk-stm32mp1.c
> +++ b/drivers/clk/stm32/clk-stm32mp1.c
> @@ -2225,10 +2225,13 @@ static void stm32mp1_osc_init(struct udevice *dev)
>   	}
>   }
>   
> -static void  __maybe_unused stm32mp1_clk_dump(struct stm32mp1_clk_priv *priv)
> +static int __maybe_unused stm32mp1_clk_dump(struct udevice *dev)
>   {
>   	char buf[32];
>   	int i, s, p;
> +	struct stm32mp1_clk_priv *priv;
> +
> +	priv = dev_get_priv(dev);
>   
>   	printf("Clocks:\n");
>   	for (i = 0; i < _PARENT_NB; i++) {
> @@ -2250,28 +2253,9 @@ static void  __maybe_unused stm32mp1_clk_dump(struct stm32mp1_clk_priv *priv)
>   			       stm32mp1_clk_parent_sel_name[i], i, p);
>   		}
>   	}
> -}
> -
> -#ifdef CONFIG_CMD_CLK
> -int soc_clk_dump(void)
> -{
> -	struct udevice *dev;
> -	struct stm32mp1_clk_priv *priv;
> -	int ret;
> -
> -	ret = uclass_get_device_by_driver(UCLASS_CLK,
> -					  DM_DRIVER_GET(stm32mp1_clock),
> -					  &dev);
> -	if (ret)
> -		return ret;
> -
> -	priv = dev_get_priv(dev);
> -
> -	stm32mp1_clk_dump(priv);
>   
>   	return 0;
>   }
> -#endif
>   
>   static int stm32mp1_clk_probe(struct udevice *dev)
>   {
> @@ -2302,7 +2286,7 @@ static int stm32mp1_clk_probe(struct udevice *dev)
>   #if defined(VERBOSE_DEBUG)
>   	/* display debug information for probe after relocation */
>   	if (gd->flags & GD_FLG_RELOC)
> -		stm32mp1_clk_dump(priv);
> +		stm32mp1_clk_dump(dev);
>   #endif
>   
>   	gd->cpu_clk = stm32mp1_clk_get(priv, _CK_MPU);
> @@ -2333,6 +2317,9 @@ static const struct clk_ops stm32mp1_clk_ops = {
>   	.disable = stm32mp1_clk_disable,
>   	.get_rate = stm32mp1_clk_get_rate,
>   	.set_rate = stm32mp1_clk_set_rate,
> +#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_SPL_BUILD)
> +	.dump = stm32mp1_clk_dump,
> +#endif
>   };
>   
>   U_BOOT_DRIVER(stm32mp1_clock) = {

Reviewed-by: Sean Anderson <seanga2@gmail.com>

[PATCH v4 8/8] cmd: clk: Make soc_clk_dump static

[Igor Prusov]

After introducing dump to clk_ops there is no need to override or expose
this symbol anymore.

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
 cmd/clk.c     | 4 ++--
 include/clk.h | 2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/cmd/clk.c b/cmd/clk.c
index 90cc6fa906..f55911db7a 100644
--- a/cmd/clk.c
+++ b/cmd/clk.c
@@ -59,7 +59,7 @@ static void show_clks(struct udevice *dev, int depth, int last_flag)
 	}
 }
 
-int __weak soc_clk_dump(void)
+static int soc_clk_dump(void)
 {
 	struct udevice *dev;
 	const struct clk_ops *ops;
@@ -81,7 +81,7 @@ int __weak soc_clk_dump(void)
 	return 0;
 }
 #else
-int __weak soc_clk_dump(void)
+static int soc_clk_dump(void)
 {
 	puts("Not implemented\n");
 	return 1;
diff --git a/include/clk.h b/include/clk.h
index d91285235f..bf0d9c9d7f 100644
--- a/include/clk.h
+++ b/include/clk.h
@@ -674,8 +674,6 @@ static inline bool clk_valid(struct clk *clk)
 	return clk && !!clk->dev;
 }
 
-int soc_clk_dump(void);
-
 #endif
 
 #define clk_prepare_enable(clk) clk_enable(clk)
-- 
2.34.1

Re: [PATCH v4 8/8] cmd: clk: Make soc_clk_dump static

[Sean Anderson]

On 10/17/23 12:56, Igor Prusov wrote:
> After introducing dump to clk_ops there is no need to override or expose
> this symbol anymore.
> 
> Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>   cmd/clk.c     | 4 ++--
>   include/clk.h | 2 --
>   2 files changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/cmd/clk.c b/cmd/clk.c
> index 90cc6fa906..f55911db7a 100644
> --- a/cmd/clk.c
> +++ b/cmd/clk.c
> @@ -59,7 +59,7 @@ static void show_clks(struct udevice *dev, int depth, int last_flag)
>   	}
>   }
>   
> -int __weak soc_clk_dump(void)
> +static int soc_clk_dump(void)
>   {
>   	struct udevice *dev;
>   	const struct clk_ops *ops;
> @@ -81,7 +81,7 @@ int __weak soc_clk_dump(void)
>   	return 0;
>   }
>   #else
> -int __weak soc_clk_dump(void)
> +static int soc_clk_dump(void)
>   {
>   	puts("Not implemented\n");
>   	return 1;
> diff --git a/include/clk.h b/include/clk.h
> index d91285235f..bf0d9c9d7f 100644
> --- a/include/clk.h
> +++ b/include/clk.h
> @@ -674,8 +674,6 @@ static inline bool clk_valid(struct clk *clk)
>   	return clk && !!clk->dev;
>   }
>   
> -int soc_clk_dump(void);
> -
>   #endif
>   
>   #define clk_prepare_enable(clk) clk_enable(clk)

Reviewed-by: Sean Anderson <seanga2@gmail.com>