From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dmytro Bablinyuk <dmytro.bablinyuk@rftechnology.com.au>
Date: Wed, 02 Nov 2005 16:39:12 +1100
Subject: [U-Boot-Users] Re: Low-boot configuration for MPC8272ADS
In-Reply-To: <dk9b1s$s3p$1@sea.gmane.org>
References: <dk9b1s$s3p$1@sea.gmane.org>
Message-ID: <dk9jcl$i0c$1@sea.gmane.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> 1. I have updated (latest snapshot) u-boot:
> 
> include/configs/MPC8260ADS.h
> 
>  #define CFG_HRCW_MASTER 0x0e72b605
> 
> board/mpc8260ads/config.mk
> 
>   TEXT_BASE = 0xff800000

1. I tried 'make MPC8272ADS_lowboot_config' but it keeps resetting with 
or without BDI attached (JP9 in position MEMORY, SW2 is FLASH ON).

2. Burn (to burn I need to move JP9 in position BCSR, otherwise it's 
just resetting)
  8272>load
  8272>unlock 0xff800000 0x40000 32
  8272>erase 0xFF800000 BLOCK
  8272>prog 0xFF800000 u-boot.bin BIN

3. Move JP9 in position MEMORY

4. Power cycle

5. Board keeps resetting with or without BDI.

Can anybody help, please?
Thank you