From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: Dario Binacchi <dario.binacchi@amarulasolutions.com>,
<u-boot@lists.denx.de>
Cc: <linux-amarula@amarulasolutions.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Tom Rini <trini@konsulko.com>,
<uboot-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH 1/6] ARM: dts: stm32: add DSI support on stm32f769
Date: Fri, 28 Mar 2025 09:30:14 +0100 [thread overview]
Message-ID: <e043f254-dcfe-4e23-babb-44cf679dcb0d@foss.st.com> (raw)
In-Reply-To: <20250324180047.1571378-2-dario.binacchi@amarulasolutions.com>
On 3/24/25 19:00, Dario Binacchi wrote:
> [backport from Linux commit a995fd2e8b3c6defd1dcdd3fb350c224e41ea1d0]
>
> Add support for MIPI DSI Host controller. Since MIPI DSI is not
> available on stm32f746, the patch adds the "stm32f769.dtsi" file
> containing the dsi node inside.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
>
> arch/arm/dts/stm32f769-disco-u-boot.dtsi | 41 +++++++++++-------------
> arch/arm/dts/stm32f769-disco.dts | 2 +-
> arch/arm/dts/stm32f769.dtsi | 20 ++++++++++++
> 3 files changed, 39 insertions(+), 24 deletions(-)
> create mode 100644 arch/arm/dts/stm32f769.dtsi
>
> diff --git a/arch/arm/dts/stm32f769-disco-u-boot.dtsi b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
> index add55c96e21f..c5ae753debe6 100644
> --- a/arch/arm/dts/stm32f769-disco-u-boot.dtsi
> +++ b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
> @@ -44,30 +44,25 @@
> };
> };
> };
> +};
>
> - soc {
> - dsi: dsi@40016c00 {
> - compatible = "st,stm32-dsi";
> - reg = <0x40016c00 0x800>;
> - resets = <&rcc STM32F7_APB2_RESET(DSI)>;
> - clocks = <&rcc 0 STM32F7_APB2_CLOCK(DSI)>,
> - <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>,
> - <&clk_hse>;
> - clock-names = "pclk", "px_clk", "ref";
> - bootph-all;
> - status = "okay";
> -
> - ports {
> - port@0 {
> - dsi_out: endpoint {
> - remote-endpoint = <&panel_in>;
> - };
> - };
> - port@1 {
> - dsi_in: endpoint {
> - remote-endpoint = <&dp_out>;
> - };
> - };
> +&dsi {
> + clocks = <&rcc 0 STM32F7_APB2_CLOCK(DSI)>,
> + <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>,
> + <&clk_hse>;
> + clock-names = "pclk", "px_clk", "ref";
> + bootph-all;
> + status = "okay";
> +
> + ports {
> + port@0 {
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + port@1 {
> + dsi_in: endpoint {
> + remote-endpoint = <&dp_out>;
> };
> };
> };
> diff --git a/arch/arm/dts/stm32f769-disco.dts b/arch/arm/dts/stm32f769-disco.dts
> index d63cd2ba7eb4..ad1b442055e1 100644
> --- a/arch/arm/dts/stm32f769-disco.dts
> +++ b/arch/arm/dts/stm32f769-disco.dts
> @@ -5,7 +5,7 @@
> */
>
> /dts-v1/;
> -#include "stm32f746.dtsi"
> +#include "stm32f769.dtsi"
> #include "stm32f769-pinctrl.dtsi"
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/arch/arm/dts/stm32f769.dtsi b/arch/arm/dts/stm32f769.dtsi
> new file mode 100644
> index 000000000000..4e7d9032149c
> --- /dev/null
> +++ b/arch/arm/dts/stm32f769.dtsi
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2023 Dario Binacchi <dario.binacchi@amarulasolutions.com>
> + */
> +
> +#include "stm32f746.dtsi"
> +
> +/ {
> + soc {
> + dsi: dsi@40016c00 {
> + compatible = "st,stm32-dsi";
> + reg = <0x40016c00 0x800>;
> + clocks = <&rcc 1 CLK_F769_DSI>, <&clk_hse>;
> + clock-names = "pclk", "ref";
> + resets = <&rcc STM32F7_APB2_RESET(DSI)>;
> + reset-names = "apb";
> + status = "disabled";
> + };
> + };
> +};
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Thanks
Patrice
next prev parent reply other threads:[~2025-03-28 8:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-24 18:00 [PATCH 0/6] Support NT35510 panel controller on stm32f769i-disco board Dario Binacchi
2025-03-24 18:00 ` [PATCH 1/6] ARM: dts: stm32: add DSI support on stm32f769 Dario Binacchi
2025-03-28 8:30 ` Patrice CHOTARD [this message]
2025-03-24 18:00 ` [PATCH 2/6] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco Dario Binacchi
2025-03-28 8:27 ` Patrice CHOTARD
2025-03-24 18:00 ` [PATCH 3/6] ARM: dts: stm32: add display support " Dario Binacchi
2025-03-28 8:26 ` Patrice CHOTARD
2025-03-24 18:00 ` [PATCH 4/6] ARM: dts: add stm32f769-disco-mb1166-reva09 Dario Binacchi
2025-03-28 8:25 ` Patrice CHOTARD
2025-03-24 18:00 ` [PATCH 5/6] video: support FRIDA FRD400B25025-A-CTK Dario Binacchi
2025-03-24 18:00 ` [PATCH 6/6] board: stm32f769-disco: support FRD400B25025-A-CTK display Dario Binacchi
2025-03-28 8:31 ` Patrice CHOTARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e043f254-dcfe-4e23-babb-44cf679dcb0d@foss.st.com \
--to=patrice.chotard@foss.st.com \
--cc=dario.binacchi@amarulasolutions.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=patrick.delaunay@foss.st.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-stm32@st-md-mailman.stormreply.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox