From: Andrew F. Davis <afd@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/5] Revert "configs: am335x: usb: do not define CONFIG_DM_USB for spl"
Date: Mon, 6 Feb 2017 13:43:43 -0600 [thread overview]
Message-ID: <e901eadc-9806-72ca-71e4-deb11613315a@ti.com> (raw)
In-Reply-To: <5b65f641-c79f-48a3-47bc-46cfac08d110@adaptrum.com>
On 02/06/2017 12:47 PM, Alex wrote:
>
>
> On 02/06/2017 07:52 AM, Andrew F. Davis wrote:
>> On 02/03/2017 05:42 PM, Alexandru Gagniuc wrote:
>>> This reverts commit 4623f974a585b59bd07fb60a326a096290aa4c53.
>>> This confuses the #ifdef logic in am33xx/board.c. This results in
>>> undefined symbols when USB gadget mode is disabled in .config.
>>>
>>
>> The #ifdef logic is a bit of a nightmare right now while we migrate to
>> Kconfig from header defines, and so I agree this commit is a bit
>> confused. But how do you fix the problem the commit you are reverting
>> intended to fix?
>
> While I fully agree that the requisite parts should be moved to Kconfig,
> what I am trying to do is re-use as much of the existing infrastructure
> as possible. Unfortunately, I don't have the answer to the question of
> how to fix the underlying problem. Please see below.
>
>> SPL uses the same USB code as regular U-Boot, but DM_USB is not yet
>> compatible with SPL, and so when CONFIG_DM_USB is enabled when SPL is
>> being built, well, bad things happen.
>
> At the end of this patch series, I add a defconfig with both
> CONFIG_DM_USB and CONFIG_SPL selected. We see undefined symbols and bad
> things happen when this revert is not applied, not the other way around.
>
>> Undefined symbols will happen until the Kconfig conversion is finished
>> and some proper kconfig dependencies are defined. In the meantime, the
>> only other fix for this commit will be to convert DM_USB code to work
>> with SPL.
>
> Of course! And as you noticed this patch is a "lesser of two evils" fix.
> I do not have the bandwidth to rework the USB/SPL code, though I would
> like to avoid blocking ACRS2 support on SPL refactoring. Is this
> reasonable?
>
Absolutely reasonable to me, because I too do not have spare bandwidth
for this, I just like pointing it out every-time someone messes with SPL
and DM, maybe someday someone will find the time actually fix it, then I
can at least feel like I helped :)
Andrew
> Alex
>
>> Andrew
>>
>>> Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
>>> ---
>>> include/configs/am335x_evm.h | 1 -
>>> 1 file changed, 1 deletion(-)
>>>
>>> diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
>>> index 85c0728..cd42601 100644
>>> --- a/include/configs/am335x_evm.h
>>> +++ b/include/configs/am335x_evm.h
>>> @@ -282,7 +282,6 @@
>>> #ifdef CONFIG_SPL_BUILD
>>> #undef CONFIG_DM_MMC
>>> #undef CONFIG_TIMER
>>> -#undef CONFIG_DM_USB
>>> #endif
>>>
>>> #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
>>>
next prev parent reply other threads:[~2017-02-06 19:43 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-03 23:42 [U-Boot] [PATCH 0/5] Add support for Adaptrum ACRS2 mainboard Alexandru Gagniuc
2017-02-03 23:42 ` [U-Boot] [PATCH 1/5] configs: am335x_evm: Enable FASTBOOT based on kconfig Alexandru Gagniuc
2017-02-06 15:15 ` Andrew F. Davis
2017-02-06 18:32 ` Alex
2017-02-03 23:42 ` [U-Boot] [PATCH 2/5] Revert "configs: am335x: usb: do not define CONFIG_DM_USB for spl" Alexandru Gagniuc
2017-02-06 15:52 ` Andrew F. Davis
2017-02-06 18:47 ` Alex
2017-02-06 19:43 ` Andrew F. Davis [this message]
2017-02-06 21:30 ` Grygorii Strashko
2017-02-06 22:02 ` Alexandru Gagniuc
2017-02-06 22:30 ` [U-Boot] [PATCH] am33xx: board: Refactor USB initialization into separate function Alexandru Gagniuc
2017-02-12 13:55 ` Andreas Färber
2017-02-13 17:18 ` Alex
2017-02-03 23:42 ` [U-Boot] [PATCH 3/5] ARM: DTS: Add devicetree for Adaptrum ACRS2 mainboard Alexandru Gagniuc
2017-02-03 23:42 ` [U-Boot] [PATCH 4/5] configs: am335x: Enable PHY_VITESSE Alexandru Gagniuc
2017-02-06 15:56 ` Andrew F. Davis
2017-02-06 19:02 ` Alex G.
2017-02-06 19:47 ` Andrew F. Davis
2017-02-06 20:30 ` Alex G.
2017-02-06 20:38 ` Andrew F. Davis
2017-02-06 20:54 ` Alex G.
2017-02-06 21:03 ` Andrew F. Davis
2017-02-06 21:05 ` [U-Boot] [PATCH] drivers: net: Provide Kconfig menu for PHYLIB Alexandru Gagniuc
2017-02-06 21:45 ` [U-Boot] [PATCH] drivers: net: Move PHYLIB to Kconfig Andrew F. Davis
2017-02-07 16:28 ` Joe Hershberger
2017-02-03 23:42 ` [U-Boot] [PATCH 5/5] configs: Add defconfig for Adaptrum ACRS2 Alexandru Gagniuc
2017-02-07 3:17 ` [U-Boot] [PATCH v2 0/6] Add support for Adaptrum ACRS2 board Alexandru Gagniuc
2017-02-07 3:17 ` [U-Boot] [PATCH v2 1/6] configs: am335x_evm: Enable FASTBOOT based on kconfig Alexandru Gagniuc
2017-02-07 18:23 ` Tom Rini
2017-07-12 12:14 ` [U-Boot] [U-Boot, v2, " Tom Rini
2017-02-07 3:17 ` [U-Boot] [PATCH v2 2/6] am33xx: board: Refactor USB initialization into separate function Alexandru Gagniuc
2017-02-07 18:23 ` Tom Rini
2017-07-12 12:14 ` [U-Boot] [U-Boot, v2, " Tom Rini
2017-02-07 3:17 ` [U-Boot] [PATCH v2 3/6] drivers: net: Provide Kconfig menu for PHYLIB Alexandru Gagniuc
2017-02-07 16:28 ` Joe Hershberger
2017-02-07 18:23 ` Tom Rini
2017-02-09 16:28 ` [U-Boot] " Joe Hershberger
2017-02-09 18:18 ` Alexandru Gagniuc
2017-02-09 22:19 ` Joe Hershberger
2017-02-09 22:45 ` Tom Rini
2017-02-07 3:17 ` [U-Boot] [PATCH v2 4/6] drivers: net: Move PHYLIB to Kconfig Alexandru Gagniuc
2017-02-07 16:55 ` Andrew F. Davis
2017-02-07 17:15 ` Joe Hershberger
2017-02-07 17:49 ` Tom Rini
2017-02-07 17:52 ` Tom Rini
2017-02-08 22:45 ` Joe Hershberger
2017-02-07 3:17 ` [U-Boot] [PATCH v2 5/6] ARM: DTS: Add devicetree for Adaptrum ACRS2 mainboard Alexandru Gagniuc
2017-02-07 3:17 ` [U-Boot] [PATCH v2 6/6] configs: Add defconfig for Adaptrum ACRS2 Alexandru Gagniuc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e901eadc-9806-72ca-71e4-deb11613315a@ti.com \
--to=afd@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox