From: Praneeth Bajjuri <praneeth@ti.com>
To: Aswath Govindraju <a-govindraju@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Lokesh Vutla <lokeshvutla@ti.com>,
Dave Gerlach <d-gerlach@ti.com>, Nishanth Menon <nm@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>, Suman Anna <s-anna@ti.com>,
Keerthy <j-keerthy@ti.com>, <u-boot@lists.denx.de>
Subject: Re: [PATCH v3 00/10] AM642-EVM: Add USB support
Date: Fri, 4 Jun 2021 11:48:00 -0500 [thread overview]
Message-ID: <ec8ea665-16bf-d6b8-c84d-e727e556367b@ti.com> (raw)
In-Reply-To: <20210604163043.12811-1-a-govindraju@ti.com>
On 6/4/21 11:30 AM, Aswath Govindraju wrote:
> The following series of patches add support for the following
> - Kconfig symbol for giving the load address for ATF
> - USB Mass storage boot mode in AM642-EVM
> - DFU boot mode in AM642-EVM
> - Host and peripheral modes for AM642-EVM in U-Boot
> - Set the USB PHY core voltage to 0.85V
>
> changes since v2,
> - Increased the max size of ATF in patch 9
Please confirm if this is tested on ATF 2.5 too.
> - Added reviewed-by from Suman Anna in patch 1
> - Reworded the subject of patch 8
>
> changes since v1,
> - Corrected the default load address of ATF to
> 0x70000000
>
> Aswath Govindraju (10):
> tools: k3_fit_atf: Add support for providing ATF load address using a
> Kconfig symbol
> arm: mach-k3: am642_init: Add support for USB boot mode
> arm: mach-k3: am642_init: Do USB fixups to facilitate host and device
> boot modes
> board: ti: am64x: Set the core voltage of USB PHY to 0.85V
> arm: dts: k3-am64-main: Add USB DT nodes
> arm: dts: k3-am642-*-evm: Add USB support
> arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to
> peripheral for USB subsystem
> configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to
> satisfy the limitations for USB DFU boot mode
> arm: dts: k3-am64-main: Update the location of ATF in SRAM and
> increase its max size
> configs: am64: Enable configs to support USB host and device modes
>
> arch/arm/dts/k3-am64-main.dtsi | 32 ++++++++++++-
> arch/arm/dts/k3-am642-evm-u-boot.dtsi | 13 ++++++
> arch/arm/dts/k3-am642-evm.dts | 18 ++++++++
> arch/arm/dts/k3-am642-r5-evm.dts | 18 ++++++++
> arch/arm/mach-k3/Kconfig | 7 +++
> arch/arm/mach-k3/am642_init.c | 46 ++++++++++++++++++-
> arch/arm/mach-k3/config.mk | 1 +
> arch/arm/mach-k3/include/mach/am64_hardware.h | 11 +++--
> arch/arm/mach-k3/include/mach/am64_spl.h | 6 ++-
> board/ti/am64x/evm.c | 14 ++++++
> configs/am64x_evm_a53_defconfig | 40 ++++++++++++++++
> configs/am64x_evm_r5_defconfig | 38 +++++++++++++--
> include/configs/am64x_evm.h | 15 +++++-
> tools/k3_fit_atf.sh | 9 ++--
> 14 files changed, 251 insertions(+), 17 deletions(-)
>
next prev parent reply other threads:[~2021-06-04 16:48 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-04 16:30 [PATCH v3 00/10] AM642-EVM: Add USB support Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 01/10] tools: k3_fit_atf: Add support for providing ATF load address using a Kconfig symbol Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 02/10] arm: mach-k3: am642_init: Add support for USB boot mode Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 03/10] arm: mach-k3: am642_init: Do USB fixups to facilitate host and device boot modes Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 04/10] board: ti: am64x: Set the core voltage of USB PHY to 0.85V Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 05/10] arm: dts: k3-am64-main: Add USB DT nodes Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 06/10] arm: dts: k3-am642-*-evm: Add USB support Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 07/10] arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to peripheral for USB subsystem Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 08/10] configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to satisfy the limitations for USB DFU boot mode Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 09/10] arm: dts: k3-am64-main: Update the location of ATF in SRAM and increase its max size Aswath Govindraju
2021-06-04 16:30 ` [PATCH v3 10/10] configs: am64: Enable configs to support USB host and device modes Aswath Govindraju
2021-06-04 16:48 ` Praneeth Bajjuri [this message]
2021-06-04 16:49 ` [PATCH v3 00/10] AM642-EVM: Add USB support Aswath Govindraju
2021-06-04 16:53 ` Praneeth Bajjuri
2021-06-07 4:16 ` Praneeth Bajjuri
2021-06-09 12:30 ` Aswath Govindraju
2021-06-09 16:55 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec8ea665-16bf-d6b8-c84d-e727e556367b@ti.com \
--to=praneeth@ti.com \
--cc=a-govindraju@ti.com \
--cc=d-gerlach@ti.com \
--cc=j-keerthy@ti.com \
--cc=kishon@ti.com \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=s-anna@ti.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox