* [U-Boot-Users] [PATCH] Add support for AT91RM9200 NAND (Smartmedia) controller
@ 2006-12-06 17:50 Frank Mandarino
0 siblings, 0 replies; only message in thread
From: Frank Mandarino @ 2006-12-06 17:50 UTC (permalink / raw)
To: u-boot
The attached patch adds support for the AT91RM9200 NAND (Smartmedia)
controller, allowing use of the U-Boot NAND commands on AT91RM9200-based
boards which use NAND flash.
It uses four CFG parameters:
CFG_NAND_BASE - address of Smartmedia chip select (normally
0x40000000)
CFG_NAND_AT91_CLE_BIT - address bit number used to set CLE signal
CFG_NAND_AT91_ALE_BIT - address bit number used to set ALE signal
CFG_NAND_CHIP_DELAY - command delay time in microseconds
I have been using this code for almost a year with no problems on our
custom AT91RM9200 board. I believe it would be useful for others as the
popularity of NAND flash increases.
Regards,
../fam
--
Frank Mandarino fmandarino(a)endrelia.com
Endrelia Technologies Inc.
Toronto, Ontario, Canada
-------------- next part --------------
A non-text attachment was scrubbed...
Name: u-boot_at91_nand.patch
Type: text/x-patch
Size: 6032 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20061206/1c728c86/attachment.bin
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-12-06 17:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-06 17:50 [U-Boot-Users] [PATCH] Add support for AT91RM9200 NAND (Smartmedia) controller Frank Mandarino
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox