* [U-Boot-Users] Where is all the commands?
@ 2007-02-28 9:35 25an
2007-02-28 9:49 ` [U-Boot-Users] Antw: " Niklaus Giger
0 siblings, 1 reply; 2+ messages in thread
From: 25an @ 2007-02-28 9:35 UTC (permalink / raw)
To: u-boot
Hi!
I have just managed to compile u-boot and managed to run it on the board
(AT91SAM9261ek) but one of the reasons why I compiled it and did not just
use the
u-boot.bin that came with board was that it did not have all the commands
that
the DENX U-Boot manual mentioned.
Fore example I am missing the iminfo,bdinfo,diskboot and dhcp commands.
Any thoughts about this.
Thanks
--
View this message in context: http://www.nabble.com/Where-is-all-the-commands--tf3307710.html#a9200692
Sent from the Uboot - Users mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] Antw: Where is all the commands?
2007-02-28 9:35 [U-Boot-Users] Where is all the commands? 25an
@ 2007-02-28 9:49 ` Niklaus Giger
0 siblings, 0 replies; 2+ messages in thread
From: Niklaus Giger @ 2007-02-28 9:49 UTC (permalink / raw)
To: u-boot
Hi
>>> 25an<mans.zigher@gmail.com> 28.02.07 10:35:28 >>>
>
>Hi!
>
>I have just managed to compile u-boot and managed to run it on the board
>(AT91SAM9261ek) but one of the reasons why I compiled it and did not just
>use the
>u-boot.bin that came with board was that it did not have all the commands
>that
>the DENX U-Boot manual mentioned.
>Fore example I am missing the iminfo,bdinfo,diskboot and dhcp commands.
>Any thoughts about this.
Take a look at the README, (look for Monitor Functions). Then change the
define CONFIG_COMMANDS in your include/configs/<board.h>.
Best regards
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-02-28 9:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-02-28 9:35 [U-Boot-Users] Where is all the commands? 25an
2007-02-28 9:49 ` [U-Boot-Users] Antw: " Niklaus Giger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox