From: Stefan Roese <sr@denx.de>
To: "Marek Behún" <kabel@kernel.org>
Cc: u-boot@lists.denx.de, "Pali Rohár" <pali@kernel.org>,
"Marek Behún" <marek.behun@nic.cz>
Subject: Re: [PATCH u-boot-marvell 09/13] tools: kwboot: Simplify code for aligning image header
Date: Tue, 26 Oct 2021 07:45:58 +0200 [thread overview]
Message-ID: <f2a39b88-e9ac-e6e9-5391-2076cddef818@denx.de> (raw)
In-Reply-To: <20211025131304.21310-10-kabel@kernel.org>
On 25.10.21 15:13, Marek Behún wrote:
> From: Pali Rohár <pali@kernel.org>
>
> Expression (hdrsz % KWBOOT_XM_BLKSZ) is non-zero therefore expression
> (KWBOOT_XM_BLKSZ - hdrsz % KWBOOT_XM_BLKSZ) is always less than value
> KWBOOT_XM_BLKSZ. So there is no need to add another modulo. Also rename
> variable `offset` to `grow` which better describes what is stored in
> this variable.
>
> Signed-off-by: Pali Rohár <pali@kernel.org>
> Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
> ---
> tools/kwboot.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/tools/kwboot.c b/tools/kwboot.c
> index 7fd28aa754..adec4ec97d 100644
> --- a/tools/kwboot.c
> +++ b/tools/kwboot.c
> @@ -1563,8 +1563,7 @@ kwboot_img_patch(void *img, size_t *size, int baudrate)
> }
>
> if (hdrsz % KWBOOT_XM_BLKSZ) {
> - size_t offset = (KWBOOT_XM_BLKSZ - hdrsz % KWBOOT_XM_BLKSZ) %
> - KWBOOT_XM_BLKSZ;
> + size_t grow = KWBOOT_XM_BLKSZ - hdrsz % KWBOOT_XM_BLKSZ;
>
> if (is_secure) {
> fprintf(stderr, "Cannot align image with secure header\n");
> @@ -1572,7 +1571,7 @@ kwboot_img_patch(void *img, size_t *size, int baudrate)
> }
>
> kwboot_printv("Aligning image header to Xmodem block size\n");
> - kwboot_img_grow_hdr(img, size, offset);
> + kwboot_img_grow_hdr(img, size, grow);
> }
>
> hdr->checksum = kwboot_hdr_csum8(hdr) - csum;
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
next prev parent reply other threads:[~2021-10-26 5:46 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-25 13:12 [PATCH u-boot-marvell 00/13] Yet another kwboot improvements Marek Behún
2021-10-25 13:12 ` [PATCH u-boot-marvell 01/13] tools: kwboot: Initialize rfds to zero Marek Behún
2021-10-26 5:41 ` Stefan Roese
2021-10-25 13:12 ` [PATCH u-boot-marvell 02/13] tools: kwboot: Fix initialization of tty device Marek Behún
2021-10-26 5:41 ` Stefan Roese
2021-10-25 13:12 ` [PATCH u-boot-marvell 03/13] tools: kwboot: Reserve enough space for patching kwbimage in memory Marek Behún
2021-10-26 5:42 ` Stefan Roese
2021-10-25 13:12 ` [PATCH u-boot-marvell 04/13] tools: kwboot: Validate 4-byte image data checksum Marek Behún
2021-10-26 5:43 ` Stefan Roese
2021-10-25 13:12 ` [PATCH u-boot-marvell 05/13] tools: kwboot: Inject baudrate change back code after data part Marek Behún
2021-10-26 5:43 ` Stefan Roese
2021-10-25 13:12 ` [PATCH u-boot-marvell 06/13] tools: kwboot: Recalculate 4-byte data checksum after injecting baudrate code Marek Behún
2021-10-26 5:44 ` Stefan Roese
2021-10-25 13:12 ` [PATCH u-boot-marvell 07/13] tools: kwboot: Correctly set configuration of UART for BootROM messages Marek Behún
2021-10-26 5:45 ` Stefan Roese
2021-10-25 13:12 ` [PATCH u-boot-marvell 08/13] tools: kwboot: Show verbose message when waiting for baudrate change magic Marek Behún
2021-10-26 5:45 ` Stefan Roese
2021-10-25 13:13 ` [PATCH u-boot-marvell 09/13] tools: kwboot: Simplify code for aligning image header Marek Behún
2021-10-26 5:45 ` Stefan Roese [this message]
2021-10-25 13:13 ` [PATCH u-boot-marvell 10/13] tools: kwboot: Do not modify kwbimage header before increasing its size Marek Behún
2021-10-26 5:46 ` Stefan Roese
2021-10-25 13:13 ` [PATCH u-boot-marvell 11/13] tools: kwboot: Calculate real used space in kwbimage header when calling kwboot_img_grow_hdr() Marek Behún
2021-10-26 5:48 ` Stefan Roese
2021-10-25 13:13 ` [PATCH u-boot-marvell 12/13] tools: kwboot: Change retry loop from decreasing to increasing Marek Behún
2021-10-26 5:49 ` Stefan Roese
2021-10-25 13:13 ` [PATCH u-boot-marvell 13/13] tools: kwboot: Resend first 3 xmodem retry packets immediately Marek Behún
2021-10-26 5:50 ` Stefan Roese
2021-10-25 14:39 ` [PATCH u-boot-marvell 00/13] Yet another kwboot improvements Stefan Roese
2021-10-25 14:42 ` Pali Rohár
2021-10-25 15:15 ` Stefan Roese
2021-10-26 8:33 ` Pali Rohár
2021-10-26 8:45 ` Stefan Roese
2021-10-26 9:06 ` Pali Rohár
2021-10-26 11:09 ` Stefan Roese
2021-10-26 12:40 ` Pali Rohár
2021-10-26 13:06 ` Marek Behún
2021-10-26 14:06 ` Stefan Roese
2021-10-26 14:21 ` Stefan Roese
2021-10-26 14:48 ` Pali Rohár
2021-10-26 15:13 ` Stefan Roese
2021-10-26 15:20 ` Marek Behún
2021-10-26 15:25 ` Stefan Roese
2021-10-26 15:34 ` Marek Behún
2021-10-26 15:40 ` Stefan Roese
2021-10-26 18:48 ` Pali Rohár
2021-10-27 5:09 ` Stefan Roese
2021-10-27 13:52 ` Pali Rohár
2021-10-27 14:10 ` Pali Rohár
2021-10-27 15:08 ` Marek Behún
2021-10-27 15:13 ` Pali Rohár
2021-10-27 15:27 ` Stefan Roese
2021-10-27 15:29 ` Pali Rohár
2021-10-27 21:03 ` Pali Rohár
2021-10-28 6:16 ` Stefan Roese
2021-10-28 11:04 ` Pali Rohár
2021-10-28 14:20 ` Stefan Roese
2021-10-28 17:00 ` Pali Rohár
2021-10-29 4:44 ` Stefan Roese
2021-11-03 7:46 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f2a39b88-e9ac-e6e9-5391-2076cddef818@denx.de \
--to=sr@denx.de \
--cc=kabel@kernel.org \
--cc=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox