From: Kever Yang <kever.yang@rock-chips.com>
To: u-boot@lists.denx.de
Subject: [PATCH] pci: Make Rockchip PCIe voltage regulators optional
Date: Mon, 25 May 2020 10:56:41 +0800 [thread overview]
Message-ID: <f2fea768-e82b-dffe-a227-545a12963e49@rock-chips.com> (raw)
In-Reply-To: <20200524203251.28260-1-kettenis@openbsd.org>
On 2020/5/25 ??4:32, Mark Kettenis wrote:
> The vpcie*-supply properties are optional and these are absent on
> boards like the ROCKPro64 and Firefly RK3399 where the voltage is
> supplied by always-on regulators that are already enabled upon
> boot. Make these regulators optional and properly check their
> presence before attempting to enable them.
>
> Makes PCIe work on un U-Boot on the boards mentioned above.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> drivers/pci/pcie_rockchip.c | 33 ++++++++++++++++++++-------------
> 1 file changed, 20 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pci/pcie_rockchip.c b/drivers/pci/pcie_rockchip.c
> index 82a8396e42..0edc2464a8 100644
> --- a/drivers/pci/pcie_rockchip.c
> +++ b/drivers/pci/pcie_rockchip.c
> @@ -322,7 +322,7 @@ static int rockchip_pcie_set_vpcie(struct udevice *dev)
> struct rockchip_pcie *priv = dev_get_priv(dev);
> int ret;
>
> - if (!IS_ERR(priv->vpcie3v3)) {
> + if (priv->vpcie3v3) {
> ret = regulator_set_enable(priv->vpcie3v3, true);
> if (ret) {
> dev_err(dev, "failed to enable vpcie3v3 (ret=%d)\n",
> @@ -331,24 +331,31 @@ static int rockchip_pcie_set_vpcie(struct udevice *dev)
> }
> }
>
> - ret = regulator_set_enable(priv->vpcie1v8, true);
> - if (ret) {
> - dev_err(dev, "failed to enable vpcie1v8 (ret=%d)\n", ret);
> - goto err_disable_3v3;
> + if (priv->vpcie1v8) {
> + ret = regulator_set_enable(priv->vpcie1v8, true);
> + if (ret) {
> + dev_err(dev, "failed to enable vpcie1v8 (ret=%d)\n",
> + ret);
> + goto err_disable_3v3;
> + }
> }
>
> - ret = regulator_set_enable(priv->vpcie0v9, true);
> - if (ret) {
> - dev_err(dev, "failed to enable vpcie0v9 (ret=%d)\n", ret);
> - goto err_disable_1v8;
> + if (priv->vpcie0v9) {
> + ret = regulator_set_enable(priv->vpcie0v9, true);
> + if (ret) {
> + dev_err(dev, "failed to enable vpcie0v9 (ret=%d)\n",
> + ret);
> + goto err_disable_1v8;
> + }
> }
>
> return 0;
>
> err_disable_1v8:
> - regulator_set_enable(priv->vpcie1v8, false);
> + if (priv->vpcie1v8)
> + regulator_set_enable(priv->vpcie1v8, false);
> err_disable_3v3:
> - if (!IS_ERR(priv->vpcie3v3))
> + if (priv->vpcie3v3)
> regulator_set_enable(priv->vpcie3v3, false);
> return ret;
> }
> @@ -424,14 +431,14 @@ static int rockchip_pcie_parse_dt(struct udevice *dev)
>
> ret = device_get_supply_regulator(dev, "vpcie1v8-supply",
> &priv->vpcie1v8);
> - if (ret) {
> + if (ret && ret != -ENOENT) {
> dev_err(dev, "failed to get vpcie1v8 supply (ret=%d)\n", ret);
> return ret;
> }
>
> ret = device_get_supply_regulator(dev, "vpcie0v9-supply",
> &priv->vpcie0v9);
> - if (ret) {
> + if (ret && ret != -ENOENT) {
> dev_err(dev, "failed to get vpcie0v9 supply (ret=%d)\n", ret);
> return ret;
> }
next prev parent reply other threads:[~2020-05-25 2:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-24 20:32 [PATCH] pci: Make Rockchip PCIe voltage regulators optional Mark Kettenis
2020-05-25 2:56 ` Kever Yang [this message]
2020-06-01 0:56 ` Kever Yang
2020-05-25 9:10 ` Marcin Juszkiewicz
2020-05-28 18:43 ` Kurt Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f2fea768-e82b-dffe-a227-545a12963e49@rock-chips.com \
--to=kever.yang@rock-chips.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox