From: Alper Nebi Yasak <alpernebiyasak@gmail.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: u-boot@lists.denx.de, Peng Fan <peng.fan@nxp.com>,
sbabic@denx.de, festevam@gmail.com,
ariel.dalessandro@collabora.com, michael@amarulasolutions.com,
tharvey@gateworks.com, sjg@chromium.org, marek.behun@nic.cz,
pali@kernel.org, sr@denx.de, ricardo@foundries.io,
trini@konsulko.com, patrick.delaunay@foss.st.com,
"NXP i.MX U-Boot Team" <uboot-imx@nxp.com>,
Jagan Teki <jagan@amarulasolutions.com>,
Matteo Lisi <matteo.lisi@engicam.com>
Subject: Re: [PATCH V4 3/8] imx: imx8mm-icore: migrate to use BINMAN
Date: Sun, 22 May 2022 16:56:55 +0300 [thread overview]
Message-ID: <f3dee3f4-6a10-cb57-c488-9a2330598c62@gmail.com> (raw)
In-Reply-To: <20220520141048.20034-4-peng.fan@oss.nxp.com>
On 20/05/2022 17:10, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Use BINMAN instead of imx specific packing method.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> arch/arm/mach-imx/imx8m/Kconfig | 1 +
> arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg | 10 +---------
Maybe this could be done for other imximage*.cfg files as well?
> configs/imx8mm-icore-mx8mm-ctouch2_defconfig | 2 +-
> configs/imx8mm-icore-mx8mm-edimm2.2_defconfig | 2 +-
> 4 files changed, 4 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
> index 24299ae037f..75ad7aab081 100644
> --- a/arch/arm/mach-imx/imx8m/Kconfig
> +++ b/arch/arm/mach-imx/imx8m/Kconfig
> @@ -68,6 +68,7 @@ config TARGET_IMX8MM_EVK
>
> config TARGET_IMX8MM_ICORE_MX8MM
> bool "Engicam i.Core MX8M Mini SOM"
> + select BINMAN
> select IMX8MM
> select SUPPORT_SPL
> select IMX8M_LPDDR4
> diff --git a/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg b/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg
> index e06d53ef417..5dcb8ae72f0 100644
> --- a/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg
> +++ b/arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg
> @@ -3,13 +3,5 @@
> * Copyright 2019 NXP
> */
>
> -
> -FIT
> BOOT_FROM sd
> -LOADER spl/u-boot-spl-ddr.bin 0x7E1000
> -SECOND_LOADER u-boot.itb 0x40200000 0x60000
> -
> -DDR_FW lpddr4_pmu_train_1d_imem.bin
> -DDR_FW lpddr4_pmu_train_1d_dmem.bin
> -DDR_FW lpddr4_pmu_train_2d_imem.bin
> -DDR_FW lpddr4_pmu_train_2d_dmem.bin
> +LOADER u-boot-spl-ddr.bin 0x7E1000
> diff --git a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig
> index d95a74a7237..dcb12e5d026 100644
> --- a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig
> +++ b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig
> @@ -20,7 +20,7 @@ CONFIG_DISTRO_DEFAULTS=y
> CONFIG_FIT=y
> CONFIG_FIT_EXTERNAL_OFFSET=0x3000
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
> +# CONFIG_USE_SPL_FIT_GENERATOR is not set
> CONFIG_OF_SYSTEM_SETUP=y
> CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-ctouch2.dtb"
> CONFIG_SPL_BOARD_INIT=y
> diff --git a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig
> index 43c697a39d8..22acf7317b4 100644
> --- a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig
> +++ b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig
> @@ -20,7 +20,7 @@ CONFIG_DISTRO_DEFAULTS=y
> CONFIG_FIT=y
> CONFIG_FIT_EXTERNAL_OFFSET=0x3000
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
> +# CONFIG_USE_SPL_FIT_GENERATOR is not set
> CONFIG_OF_SYSTEM_SETUP=y
> CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-edimm2.2.dtb"
> CONFIG_SPL_BOARD_INIT=y
next prev parent reply other threads:[~2022-05-22 13:59 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-20 14:10 [PATCH V4 0/8] arm64: binman: use binman symbols for imx Peng Fan (OSS)
2022-05-20 14:10 ` [PATCH V4 1/8] spl: guard u_boot_any with X86 Peng Fan (OSS)
2022-05-20 15:21 ` Tom Rini
2022-05-21 8:33 ` Peng Fan
2022-05-21 12:05 ` Tom Rini
2022-05-22 13:56 ` Alper Nebi Yasak
2022-05-22 14:50 ` Tom Rini
2022-05-23 21:10 ` Alper Nebi Yasak
2022-05-23 6:19 ` Peng Fan (OSS)
2022-05-23 6:28 ` Peng Fan (OSS)
2022-05-23 14:10 ` Tom Rini
2022-05-23 21:10 ` Alper Nebi Yasak
2022-05-22 13:55 ` Alper Nebi Yasak
2022-05-20 14:10 ` [PATCH V4 2/8] arm: dts: imx8m: update binman ddr firmware node name Peng Fan (OSS)
2022-05-22 13:56 ` Alper Nebi Yasak
2022-05-23 7:01 ` Peng Fan (OSS)
2022-05-23 21:11 ` Alper Nebi Yasak
2022-05-20 14:10 ` [PATCH V4 3/8] imx: imx8mm-icore: migrate to use BINMAN Peng Fan (OSS)
2022-05-22 13:56 ` Alper Nebi Yasak [this message]
2022-05-23 7:02 ` Peng Fan (OSS)
2022-05-20 14:10 ` [PATCH V4 4/8] armv8: u-boot-spl.lds: mark __image_copy_start as symbol Peng Fan (OSS)
2022-05-20 15:21 ` Tom Rini
2022-05-20 14:10 ` [PATCH V4 5/8] tools: binman: section: replace @ with - Peng Fan (OSS)
2022-05-22 13:57 ` Alper Nebi Yasak
2022-05-23 7:05 ` Peng Fan (OSS)
2022-05-20 14:10 ` [PATCH V4 6/8] ddr: imx8m: helper: load ddr firmware according to binman symbols Peng Fan (OSS)
2022-05-22 13:57 ` Alper Nebi Yasak
2022-05-23 7:08 ` Peng Fan (OSS)
2022-05-20 14:10 ` [PATCH V4 7/8] arm: dts: imx8m: shrink ddr firmware size to actual file size Peng Fan (OSS)
2022-05-23 21:12 ` Alper Nebi Yasak
2022-05-24 5:50 ` Michael Nazzareno Trimarchi
2022-05-20 14:10 ` [PATCH V4 8/8] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS Peng Fan (OSS)
2022-05-22 13:57 ` Alper Nebi Yasak
2022-05-23 7:10 ` Peng Fan (OSS)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f3dee3f4-6a10-cb57-c488-9a2330598c62@gmail.com \
--to=alpernebiyasak@gmail.com \
--cc=ariel.dalessandro@collabora.com \
--cc=festevam@gmail.com \
--cc=jagan@amarulasolutions.com \
--cc=marek.behun@nic.cz \
--cc=matteo.lisi@engicam.com \
--cc=michael@amarulasolutions.com \
--cc=pali@kernel.org \
--cc=patrick.delaunay@foss.st.com \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=ricardo@foundries.io \
--cc=sbabic@denx.de \
--cc=sjg@chromium.org \
--cc=sr@denx.de \
--cc=tharvey@gateworks.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox