[PATCH v2 3/5] arm/dts: k3-j7200-r5-common: Add VTM node

Gowtham Tammana
2021-06-23T21:16:04Z

Add voltage and thermal management (VTM) node. The efuse values for the
OPPs are stored under the VTM, and is needed for AVS class 0 support.

Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
---
arch/arm/dts/k3-j7200-r5-common-proc-board.dts | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
index 2ecfc89500..23a2a5060c 100644
--- a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
@@ -79,6 +79,13 @@
mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
mbox-names = "tx", "rx";
};
+
+ wkup_vtm0: vtm@42040000 {
+ compatible = "ti,am654-vtm", "ti,j721e-avs";
+ reg = <0x0 0x42040000 0x0 0x330>;
+ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+ #thermal-sensor-cells = <1>;
+ };
};

&dmsc {
--
2.17.1