[PATCH 00/20] Add i.MXRT family support

[Giulio Benetti <giulio.benetti@benettiengineering.com>]

Hi Simon,

On 1/8/20 6:39 PM, Simon Glass wrote:
> Hi Giulio,
> 
> On Tue, 7 Jan 2020 at 10:23, Giulio Benetti
> <giulio.benetti@benettiengineering.com> wrote:
>>
>> Hi Stefano, Simon, All,
>>
>> On 1/3/20 12:39 PM, Stefano Babic wrote:
>>> Hi Giulio,
>>>
>>> On 04/12/19 18:44, Giulio Benetti wrote:
>>>> This patchset add support for i.MXRT family starting from i.MXRT1050 SoC.
>>>> It provides:
>>>> - i.MXRT1050 SoC entry
>>>> - i.MXRT pinctrl driver
>>>> - i.MXRT serial driver tweaking
>>>> - i.MXRT sdram controller driver
>>>> - i.MXRT usdhc driver tweaking
>>>> - i.MXRT1050-evk initial support
>>>>
>>>> It uses all DM clocks all around and it loads correctly a basic Linux zImage.
>>>>
>>>
>>> Lukasz has already reviewed most patches, and a V2 is surely WIP. FYI: I
>>> archive this first series, and I'll wait for your next V2 - thanks !
>>
>> I really would like to, but I'm stuck on OF_PLATDATA issue for named
>> clocks in SPL, see:
>> https://lists.denx.de/pipermail/u-boot/2019-December/394944.html
>>
>> Is it enough for the moment to keep SPL *without* OF_PLATDATA and
>> implement it later?
> 
> It seems fine to me, but the assert() idea should work too.

With assert() idea you mean define a header(i.e. imx-clk-names-id.h) like:
```
#define IMX_CLK_NAME_PER	0
#define IMX_CLK_NAME_IPG	1
...
```

And then in non-OF_PLATDATA trying to:
```
struct clk per_clk;
int ret;

ret = clk_get_by_index(dev, IMX_CLK_NAME_PER, &clk);
```

And check if clock's name is "per"?

Best regards
-- 
Giulio Benetti
Benetti Engineering sas

> Regards,
> Simon
>