From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jaehoon Chung <jh80.chung@samsung.com>
Date: Wed, 7 Apr 2021 07:22:35 +0900
Subject: [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400
 speed mode
In-Reply-To: <20210405144428.12159-1-a-govindraju@ti.com>
References: <CGME20210405144459epcas1p3d6df22765afb126a2b2037c5364b0b2e@epcas1p3.samsung.com>
 <20210405144428.12159-1-a-govindraju@ti.com>
Message-ID: <fc59a861-6f9e-301e-fb54-33e753681fa6@samsung.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 4/5/21 11:44 PM, Aswath Govindraju wrote:
> From: Faiz Abbas <faiz_abbas@ti.com>
> 
> Enable HS400 speed mode by writing to HOST_CONTROL2 register.
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  drivers/mmc/sdhci.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index d9ab6a0a839e..eea4701d8af5 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)
>  	case MMC_HS_200:
>  		reg |= SDHCI_CTRL_UHS_SDR104;
>  		break;
> +	case MMC_HS_400:
> +		reg |= SDHCI_CTRL_HS400;
> +		break;
>  	default:
>  		reg |= SDHCI_CTRL_UHS_SDR12;
>  	}
>