From: Major A <andras.g.major@gmail.com>
To: u-boot@lists.denx.de
Subject: ZynqMP boot: no messages from SPL other than "Debug uart enabled"
Date: Thu, 12 Mar 2020 13:01:27 +0100 [thread overview]
Message-ID: <fe72d80f-94fa-981f-b9df-948558def130@gmail.com> (raw)
In-Reply-To: <d875e35a-3ee4-7df6-776e-dd22d9570ced@xilinx.com>
Hi Michal,
> export DEVICE_TREE=...
> should cause that CONFIG_DEFAULT_DEVICE_TREE will remain assigned to
> zcu100 but SPL/u-boot proper will be using zcu102.
>
> You can check it by looking at build folder ls spl/board/xilinx/zynqmp/
> where you see which psu_init was used (recommend to make mrproper before
> you check this to remove old builds)
OK, that seems to be the case.
> You should look at this.
> configurations {
> default = "config_17";
>
> config_17 {
> description = "zynqmp-zcu102-rev1.1";
> firmware = "atf";
> loadables = "uboot";
> fdt = "fdt_17";
> };
That's what SHOULD be there, but it isn't. "default" points to
"config_1", not 17. Why? And how do I change this (sorry for my
ignorance, but editing the file and rebuilding u-boot doesn't work
because the file gets overwritten)?
Cheers,
Andr?s
next prev parent reply other threads:[~2020-03-12 12:01 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 11:28 ZynqMP boot: no messages from SPL other than "Debug uart enabled" Major A
2020-03-12 8:15 ` Michal Simek
2020-03-12 9:12 ` Major A
2020-03-12 10:32 ` Michal Simek
2020-03-12 11:38 ` Major A
2020-03-12 11:44 ` Michal Simek
2020-03-12 12:01 ` Major A [this message]
2020-03-12 12:06 ` Michal Simek
2020-03-12 13:24 ` Major A
2020-03-12 13:31 ` Michal Simek
2020-03-12 14:19 ` Major A
2020-03-12 15:22 ` Michal Simek
2020-04-23 9:02 ` Major A
2020-04-24 12:14 ` Michal Simek
2020-04-27 22:00 ` Major A
2020-04-28 6:42 ` Michal Simek
2020-04-28 9:29 ` Major A
2020-04-28 9:33 ` Michal Simek
2020-04-28 10:53 ` Major A
2020-04-28 11:16 ` Michal Simek
2020-04-28 11:25 ` Major A
2020-04-28 11:29 ` Michal Simek
2020-04-28 13:34 ` Major A
2020-04-28 13:55 ` Michal Simek
2020-04-28 14:21 ` Major A
[not found] ` <3ab17480-431a-e0e3-c2af-e1639a2d07a6@xilinx.com>
[not found] ` <6b4c296f-fb91-fd84-f5c8-7b4f542034e4@gmail.com>
2020-04-30 10:20 ` Fwd: " Major A
[not found] ` <4f8b4b6a-c97d-38b8-5a74-98bbc916cb3a@xilinx.com>
2020-04-30 11:01 ` Major A
2020-04-30 11:03 ` Michal Simek
2020-04-30 11:10 ` Major A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fe72d80f-94fa-981f-b9df-948558def130@gmail.com \
--to=andras.g.major@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox