From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 11/26] dts: mtmips: update reset controller node for mt7628
Date: Mon, 30 Dec 2019 11:22:23 +0100 [thread overview]
Message-ID: <ff9e047f-ab76-b955-87da-52f31fba8f22@gmail.com> (raw)
In-Reply-To: <397fc641-7c2e-08c0-849a-d0468aaaaffe@mclink.it>
Am 30.12.19 um 10:19 schrieb Mauro Condarelli:
> I am having problems with this patch.
>
> Problem is "reset"command fails (for my board) with:
>> => reset
>> resetting ...
>> ### ERROR ### Please RESET the board ###
> I traced down problem to "drivers/sysreset/sysreset-uclass.c" requesting
> "uclass_first_device(UCLASS_SYSRESET, &dev)", while
> "drivers/reset/reset-mips.c"
> defines:
>> static const struct udevice_id mtmips_reset_ids[] = {
>> { .compatible = "mediatek,mtmips-reset" },
>> { }
>> };
>>
>> U_BOOT_DRIVER(mtmips_reset) = {
>> .name = "mtmips-reset",
>> .id = UCLASS_RESET,
> ... so UCLASS_SYSRESET list is empty.
>
> What am I doing wrong?
> TiA!
> Mauro
>
do you have the according node with compatible string
"mediatek,mtmips-reset" in your device-tree?
--
- Daniel
next prev parent reply other threads:[~2019-12-30 10:22 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 6:37 [U-Boot] [PATCH 00/26] Add and update drivers for MediaTek MT76x8 SoCs Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 01/26] serial: serial_mtk: enable FIFO and disable flow control Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 02/26] serial: serial_mtk: add non-DM version for SPL Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 03/26] dts: mtmips: move uart property clock-frequency into mt7628an.dtsi Weijie Gao
2019-08-28 7:13 ` Stefan Roese
2019-08-28 6:37 ` [U-Boot] [PATCH 04/26] dts: mtmips: enable high-speed UART support for mt7628 Weijie Gao
2019-08-28 7:14 ` Stefan Roese
2019-08-28 6:37 ` [U-Boot] [PATCH 05/26] spi: mt7621-spi: remove data cache and rewrite its xfer function Weijie Gao
2019-08-28 7:55 ` Stefan Roese
2019-08-28 6:37 ` [U-Boot] [PATCH 06/26] spi: mt7621-spi: restore default register value after each xfer Weijie Gao
2019-08-28 8:01 ` Stefan Roese
2019-08-28 6:37 ` [U-Boot] [PATCH 07/26] pinctrl: add support for MediaTek MT7628 Weijie Gao
2019-08-28 12:26 ` Stefan Roese
2019-08-28 12:37 ` Stefan Roese
2019-08-29 3:04 ` Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 08/26] dts: mtmips: add pinctrl node for mt7628 Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 09/26] dts: mtmips: add default pinctrl for uart nodes Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 10/26] reset: add reset controller driver for MediaTek MIPS platform Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 11/26] dts: mtmips: update reset controller node for mt7628 Weijie Gao
2019-08-28 13:18 ` Stefan Roese
2019-08-29 3:18 ` Weijie Gao
2019-12-30 9:19 ` Mauro Condarelli
2019-12-30 10:22 ` Daniel Schwierzeck [this message]
2019-12-30 11:09 ` Mauro Condarelli
2019-12-30 12:14 ` Mauro Condarelli
2020-01-02 12:30 ` Stefan Roese
2020-01-02 13:36 ` Mauro Condarelli
2019-08-28 6:37 ` [U-Boot] [PATCH 12/26] clk: add clock gating driver for MediaTek MIPS platform Weijie Gao
2019-08-28 13:24 ` Daniel Schwierzeck
2019-08-29 3:25 ` Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 13/26] dts: mtmips: add gate clock node for mt7628 Weijie Gao
2019-08-28 6:37 ` [U-Boot] [PATCH 14/26] phy: mt76x8-usb-phy: add slew rate calibration and remove non-mt7628 part Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 15/26] net: mt7628-eth: remove hardcoded gpio settings and regmap-based phy reset Weijie Gao
2019-08-28 13:32 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 16/26] net: mt7628-eth: remove phy link up detection Weijie Gao
2019-08-28 13:37 ` Stefan Roese
2019-08-29 3:32 ` Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 17/26] net: mt7628-eth: free rx descriptor on receiving failure Weijie Gao
2019-08-28 13:42 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 18/26] net: mt7628-eth: add support to isolate LAN/WAN ports Weijie Gao
2019-08-28 13:46 ` Stefan Roese
2019-08-29 4:27 ` Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 19/26] dts: mtmips: enable eth port0 led function for all boards Weijie Gao
2019-08-28 13:47 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 20/26] mmc: mtk-sd: add support for MediaTek MT7620/MT7628 SoCs Weijie Gao
2019-08-28 13:50 ` Stefan Roese
2019-08-29 4:28 ` Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 21/26] mmc: mtk-sd: add a dts property cd-active-high for builtin-cd mode Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 22/26] dts: mtmips: add mmc related nodes for mt7628an.dtsi Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 23/26] dts: mtmips: add default pinctrl for gardena-smart-gateway-mt7688 Weijie Gao
2019-08-28 13:52 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 24/26] dts: mtmips: add default pinctrl to eth nodes for all boards Weijie Gao
2019-08-28 13:55 ` Stefan Roese
2019-08-28 6:38 ` [U-Boot] [PATCH 25/26] configs: mtmips: change all boards to use mtk high-speed uart driver Weijie Gao
2019-08-28 13:57 ` Stefan Roese
2019-08-29 4:30 ` Weijie Gao
2019-08-28 6:38 ` [U-Boot] [PATCH 26/26] configs: mtmips: add necessary drivers for mtmips boards Weijie Gao
2019-08-28 13:35 ` Daniel Schwierzeck
2019-08-28 13:40 ` Stefan Roese
2019-08-29 3:34 ` Weijie Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ff9e047f-ab76-b955-87da-52f31fba8f22@gmail.com \
--to=daniel.schwierzeck@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox