* [U-Boot] [PATCH] Refresh LZMA-lib to v4.65
2009-07-21 8:45 [U-Boot] Refresh LZMA-lib to v4.65 (v3 resend) Luigi 'Comio' Mantellini
@ 2009-07-21 8:45 ` Luigi 'Comio' Mantellini
2009-07-22 7:53 ` Wolfgang Denk
2009-07-27 17:40 ` Mike Frysinger
0 siblings, 2 replies; 20+ messages in thread
From: Luigi 'Comio' Mantellini @ 2009-07-21 8:45 UTC (permalink / raw)
To: u-boot
From: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
---
common/cmd_bootm.c | 5 +-
include/configs/qemu-mips.h | 2 +
include/lzma/LzmaDec.h | 31 +
include/lzma/LzmaDecode.h | 31 -
include/lzma/LzmaTools.h | 2 +-
include/lzma/LzmaTypes.h | 15 +-
lib_generic/lzma/LGPL.txt | 502 --------------
lib_generic/lzma/LzmaDec.c | 1007 +++++++++++++++++++++++++++++
lib_generic/lzma/LzmaDec.h | 223 +++++++
lib_generic/lzma/LzmaDecode.c | 584 -----------------
lib_generic/lzma/LzmaDecode.h | 113 ----
lib_generic/lzma/LzmaTools.c | 165 +++---
lib_generic/lzma/LzmaTools.h | 4 +-
lib_generic/lzma/LzmaTypes.h | 45 --
lib_generic/lzma/Makefile | 4 +-
lib_generic/lzma/README.txt | 8 +-
lib_generic/lzma/Types.h | 208 ++++++
lib_generic/lzma/history.txt | 434 +++++++------
lib_generic/lzma/import_lzmasdk.sh | 8 +-
lib_generic/lzma/license.txt | 3 +
lib_generic/lzma/lzma.txt | 1257 +++++++++++++++++-------------------
21 files changed, 2404 insertions(+), 2247 deletions(-)
create mode 100644 include/lzma/LzmaDec.h
delete mode 100644 include/lzma/LzmaDecode.h
delete mode 100644 lib_generic/lzma/LGPL.txt
create mode 100644 lib_generic/lzma/LzmaDec.c
create mode 100644 lib_generic/lzma/LzmaDec.h
delete mode 100644 lib_generic/lzma/LzmaDecode.c
delete mode 100644 lib_generic/lzma/LzmaDecode.h
delete mode 100644 lib_generic/lzma/LzmaTypes.h
create mode 100644 lib_generic/lzma/Types.h
create mode 100644 lib_generic/lzma/license.txt
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 367d5a7..5d5dd33 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -52,9 +52,8 @@
#endif
#ifdef CONFIG_LZMA
-#define _7ZIP_BYTE_DEFINED /* Byte already defined by zlib */
#include <lzma/LzmaTypes.h>
-#include <lzma/LzmaDecode.h>
+#include <lzma/LzmaDec.h>
#include <lzma/LzmaTools.h>
#endif /* CONFIG_LZMA */
@@ -390,7 +389,7 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
int ret = lzmaBuffToBuffDecompress(
(unsigned char *)load, &unc_len,
(unsigned char *)image_start, image_len);
- if (ret != LZMA_RESULT_OK) {
+ if (ret != SZ_OK) {
printf ("LZMA: uncompress or overwrite error %d "
"- must RESET board to recover\n", ret);
show_boot_progress (-6);
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index 8444462..cbacdf9 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -163,6 +163,8 @@
#undef CONFIG_MEMSIZE_IN_BYTES
+#define CONFIG_LZMA
+
/*-----------------------------------------------------------------------
* Cache Configuration
*/
diff --git a/include/lzma/LzmaDec.h b/include/lzma/LzmaDec.h
new file mode 100644
index 0000000..967cdd1
--- /dev/null
+++ b/include/lzma/LzmaDec.h
@@ -0,0 +1,31 @@
+/*
+ * Fake include for LzmaDec.h
+ *
+ * Copyright (C) 2007-2009 Industrie Dial Face S.p.A.
+ * Luigi 'Comio' Mantellini (luigi.mantellini at idf-hit.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LZMADEC_H__FAKE__
+#define __LZMADEC_H__FAKE__
+
+#include "../../lib_generic/lzma/LzmaDec.h"
+
+#endif
diff --git a/include/lzma/LzmaDecode.h b/include/lzma/LzmaDecode.h
deleted file mode 100644
index 8fdb2c0..0000000
--- a/include/lzma/LzmaDecode.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Fake include for LzmaDecode.h
- *
- * Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
- * Luigi 'Comio' Mantellini (luigi.mantellini at idf-hit.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LZMADECODE_H__FAKE__
-#define __LZMADECODE_H__FAKE__
-
-#include "../../lib_generic/lzma/LzmaDecode.h"
-
-#endif
diff --git a/include/lzma/LzmaTools.h b/include/lzma/LzmaTools.h
index 7c5eea1..87943c0 100644
--- a/include/lzma/LzmaTools.h
+++ b/include/lzma/LzmaTools.h
@@ -1,7 +1,7 @@
/*
* Fake include for LzmaTools.h
*
- * Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
+ * Copyright (C) 2007-2009 Industrie Dial Face S.p.A.
* Luigi 'Comio' Mantellini (luigi.mantellini at idf-hit.com)
*
* See file CREDITS for list of people who contributed to this
diff --git a/include/lzma/LzmaTypes.h b/include/lzma/LzmaTypes.h
index 02daa59..86160a4 100644
--- a/include/lzma/LzmaTypes.h
+++ b/include/lzma/LzmaTypes.h
@@ -1,7 +1,7 @@
/*
- * Fake include for LzmaTypes.h
+ * Fake include for Types.h
*
- * Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
+ * Copyright (C) 2007-2009 Industrie Dial Face S.p.A.
* Luigi 'Comio' Mantellini (luigi.mantellini at idf-hit.com)
*
* See file CREDITS for list of people who contributed to this
@@ -23,9 +23,14 @@
* MA 02111-1307 USA
*/
-#ifndef __LZMATYPES_H__FAKE__
-#define __LZMATYPES_H__FAKE__
+#ifndef __TYPES_H__FAKE__
+#define __TYPES_H__FAKE__
-#include "../../lib_generic/lzma/LzmaTypes.h"
+/*
+ *This avoids the collition with zlib.h Byte definition
+ */
+#define Byte LZByte
+
+#include "../../lib_generic/lzma/Types.h"
#endif
diff --git a/lib_generic/lzma/LGPL.txt b/lib_generic/lzma/LGPL.txt
deleted file mode 100644
index 9e76f5b..0000000
--- a/lib_generic/lzma/LGPL.txt
+++ /dev/null
@@ -1,502 +0,0 @@
- GNU LESSER GENERAL PUBLIC LICENSE
- Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL. It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
- This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it. You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
- When we speak of free software, we are referring to freedom of use,
-not price. Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
- To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights. These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
- For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you. You must make sure that they, too, receive or can get the source
-code. If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it. And you must show them these terms so they know their rights.
-
- We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
- To protect each distributor, we want to make it very clear that
-there is no warranty for the free library. Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-\f
- Finally, software patents pose a constant threat to the existence of
-any free program. We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder. Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
- Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License. This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License. We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
- When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library. The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom. The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
- We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License. It also provides other free software developers Less
-of an advantage over competing non-free programs. These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries. However, the Lesser license provides advantages in certain
-special circumstances.
-
- For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard. To achieve this, non-free programs must be
-allowed to use the library. A more frequent case is that a free
-library does the same job as widely used non-free libraries. In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
- In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software. For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
- Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
- The precise terms and conditions for copying, distribution and
-modification follow. Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library". The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-\f
- GNU LESSER GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
- A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
- The "Library", below, refers to any such software library or work
-which has been distributed under these terms. A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language. (Hereinafter, translation is
-included without limitation in the term "modification".)
-
- "Source code" for a work means the preferred form of the work for
-making modifications to it. For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
- Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it). Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
- 1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
- You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-\f
- 2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) The modified work must itself be a software library.
-
- b) You must cause the files modified to carry prominent notices
- stating that you changed the files and the date of any change.
-
- c) You must cause the whole of the work to be licensed at no
- charge to all third parties under the terms of this License.
-
- d) If a facility in the modified Library refers to a function or a
- table of data to be supplied by an application program that uses
- the facility, other than as an argument passed when the facility
- is invoked, then you must make a good faith effort to ensure that,
- in the event an application does not supply such function or
- table, the facility still operates, and performs whatever part of
- its purpose remains meaningful.
-
- (For example, a function in a library to compute square roots has
- a purpose that is entirely well-defined independent of the
- application. Therefore, Subsection 2d requires that any
- application-supplied function or table used by this function must
- be optional: if the application does not supply it, the square
- root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library. To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License. (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.) Do not make any other change in
-these notices.
-\f
- Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
- This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
- 4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
- If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library". Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
- However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library". The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
- When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library. The
-threshold for this to be true is not precisely defined by law.
-
- If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work. (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
- Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-\f
- 6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
- You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License. You must supply a copy of this License. If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License. Also, you must do one
-of these things:
-
- a) Accompany the work with the complete corresponding
- machine-readable source code for the Library including whatever
- changes were used in the work (which must be distributed under
- Sections 1 and 2 above); and, if the work is an executable linked
- with the Library, with the complete machine-readable "work that
- uses the Library", as object code and/or source code, so that the
- user can modify the Library and then relink to produce a modified
- executable containing the modified Library. (It is understood
- that the user who changes the contents of definitions files in the
- Library will not necessarily be able to recompile the application
- to use the modified definitions.)
-
- b) Use a suitable shared library mechanism for linking with the
- Library. A suitable mechanism is one that (1) uses at run time a
- copy of the library already present on the user's computer system,
- rather than copying library functions into the executable, and (2)
- will operate properly with a modified version of the library, if
- the user installs one, as long as the modified version is
- interface-compatible with the version that the work was made with.
-
- c) Accompany the work with a written offer, valid for at
- least three years, to give the same user the materials
- specified in Subsection 6a, above, for a charge no more
- than the cost of performing this distribution.
-
- d) If distribution of the work is made by offering access to copy
- from a designated place, offer equivalent access to copy the above
- specified materials from the same place.
-
- e) Verify that the user has already received a copy of these
- materials or that you have already sent this user a copy.
-
- For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it. However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
- It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system. Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-\f
- 7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
- a) Accompany the combined library with a copy of the same work
- based on the Library, uncombined with any other library
- facilities. This must be distributed under the terms of the
- Sections above.
-
- b) Give prominent notice with the combined library of the fact
- that part of it is a work based on the Library, and explaining
- where to find the accompanying uncombined form of the same work.
-
- 8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License. Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License. However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
- 9. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Library or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
- 10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-\f
- 11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all. For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded. In such case, this License incorporates the limitation as if
-written in the body of this License.
-
- 13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation. If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-\f
- 14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission. For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this. Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
- NO WARRANTY
-
- 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
- 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
- END OF TERMS AND CONDITIONS
-\f
- How to Apply These Terms to Your New Libraries
-
- If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change. You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
- To apply these terms, attach the following notices to the library. It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
- <one line to give the library's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the
- library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
- <signature of Ty Coon>, 1 April 1990
- Ty Coon, President of Vice
-
-That's all there is to it!
diff --git a/lib_generic/lzma/LzmaDec.c b/lib_generic/lzma/LzmaDec.c
new file mode 100644
index 0000000..eb52501
--- /dev/null
+++ b/lib_generic/lzma/LzmaDec.c
@@ -0,0 +1,1007 @@
+/* LzmaDec.c -- LZMA Decoder
+2008-11-06 : Igor Pavlov : Public domain */
+
+#include "LzmaDec.h"
+
+#include <string.h>
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_INIT_SIZE 5
+
+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
+
+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
+ { UPDATE_0(p); i = (i + i); A0; } else \
+ { UPDATE_1(p); i = (i + i) + 1; A1; }
+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
+
+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
+#define TREE_DECODE(probs, limit, i) \
+ { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
+
+/* #define _LZMA_SIZE_OPT */
+
+#ifdef _LZMA_SIZE_OPT
+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
+#else
+#define TREE_6_DECODE(probs, i) \
+ { i = 1; \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ i -= 0x40; }
+#endif
+
+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
+
+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
+#define UPDATE_0_CHECK range = bound;
+#define UPDATE_1_CHECK range -= bound; code -= bound;
+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
+ { UPDATE_0_CHECK; i = (i + i); A0; } else \
+ { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
+#define TREE_DECODE_CHECK(probs, limit, i) \
+ { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+static const Byte kLiteralNextStates[kNumStates * 2] =
+{
+ 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5,
+ 7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10
+};
+
+#define LZMA_DIC_MIN (1 << 12)
+
+/* First LZMA-symbol is always decoded.
+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
+Out:
+ Result:
+ SZ_OK - OK
+ SZ_ERROR_DATA - Error
+ p->remainLen:
+ < kMatchSpecLenStart : normal remain
+ = kMatchSpecLenStart : finished
+ = kMatchSpecLenStart + 1 : Flush marker
+ = kMatchSpecLenStart + 2 : State Init Marker
+*/
+
+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
+{
+ CLzmaProb *probs = p->probs;
+
+ unsigned state = p->state;
+ UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
+ unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
+ unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
+ unsigned lc = p->prop.lc;
+
+ Byte *dic = p->dic;
+ SizeT dicBufSize = p->dicBufSize;
+ SizeT dicPos = p->dicPos;
+
+ UInt32 processedPos = p->processedPos;
+ UInt32 checkDicSize = p->checkDicSize;
+ unsigned len = 0;
+
+ const Byte *buf = p->buf;
+ UInt32 range = p->range;
+ UInt32 code = p->code;
+
+ do
+ {
+ CLzmaProb *prob;
+ UInt32 bound;
+ unsigned ttt;
+ unsigned posState = processedPos & pbMask;
+
+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
+ IF_BIT_0(prob)
+ {
+ unsigned symbol;
+ UPDATE_0(prob);
+ prob = probs + Literal;
+ if (checkDicSize != 0 || processedPos != 0)
+ prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
+ (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
+
+ if (state < kNumLitStates)
+ {
+ symbol = 1;
+ do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
+ }
+ else
+ {
+ unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
+ unsigned offs = 0x100;
+ symbol = 1;
+ do
+ {
+ unsigned bit;
+ CLzmaProb *probLit;
+ matchByte <<= 1;
+ bit = (matchByte & offs);
+ probLit = prob + offs + bit + symbol;
+ GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
+ }
+ while (symbol < 0x100);
+ }
+ dic[dicPos++] = (Byte)symbol;
+ processedPos++;
+
+ state = kLiteralNextStates[state];
+ /* if (state < 4) state = 0; else if (state < 10) state -= 3; else state -= 6; */
+ continue;
+ }
+ else
+ {
+ UPDATE_1(prob);
+ prob = probs + IsRep + state;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ state += kNumStates;
+ prob = probs + LenCoder;
+ }
+ else
+ {
+ UPDATE_1(prob);
+ if (checkDicSize == 0 && processedPos == 0)
+ return SZ_ERROR_DATA;
+ prob = probs + IsRepG0 + state;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
+ dicPos++;
+ processedPos++;
+ state = state < kNumLitStates ? 9 : 11;
+ continue;
+ }
+ UPDATE_1(prob);
+ }
+ else
+ {
+ UInt32 distance;
+ UPDATE_1(prob);
+ prob = probs + IsRepG1 + state;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ distance = rep1;
+ }
+ else
+ {
+ UPDATE_1(prob);
+ prob = probs + IsRepG2 + state;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ distance = rep2;
+ }
+ else
+ {
+ UPDATE_1(prob);
+ distance = rep3;
+ rep3 = rep2;
+ }
+ rep2 = rep1;
+ }
+ rep1 = rep0;
+ rep0 = distance;
+ }
+ state = state < kNumLitStates ? 8 : 11;
+ prob = probs + RepLenCoder;
+ }
+ {
+ unsigned limit, offset;
+ CLzmaProb *probLen = prob + LenChoice;
+ IF_BIT_0(probLen)
+ {
+ UPDATE_0(probLen);
+ probLen = prob + LenLow + (posState << kLenNumLowBits);
+ offset = 0;
+ limit = (1 << kLenNumLowBits);
+ }
+ else
+ {
+ UPDATE_1(probLen);
+ probLen = prob + LenChoice2;
+ IF_BIT_0(probLen)
+ {
+ UPDATE_0(probLen);
+ probLen = prob + LenMid + (posState << kLenNumMidBits);
+ offset = kLenNumLowSymbols;
+ limit = (1 << kLenNumMidBits);
+ }
+ else
+ {
+ UPDATE_1(probLen);
+ probLen = prob + LenHigh;
+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
+ limit = (1 << kLenNumHighBits);
+ }
+ }
+ TREE_DECODE(probLen, limit, len);
+ len += offset;
+ }
+
+ if (state >= kNumStates)
+ {
+ UInt32 distance;
+ prob = probs + PosSlot +
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
+ TREE_6_DECODE(prob, distance);
+ if (distance >= kStartPosModelIndex)
+ {
+ unsigned posSlot = (unsigned)distance;
+ int numDirectBits = (int)(((distance >> 1) - 1));
+ distance = (2 | (distance & 1));
+ if (posSlot < kEndPosModelIndex)
+ {
+ distance <<= numDirectBits;
+ prob = probs + SpecPos + distance - posSlot - 1;
+ {
+ UInt32 mask = 1;
+ unsigned i = 1;
+ do
+ {
+ GET_BIT2(prob + i, i, ; , distance |= mask);
+ mask <<= 1;
+ }
+ while (--numDirectBits != 0);
+ }
+ }
+ else
+ {
+ numDirectBits -= kNumAlignBits;
+ do
+ {
+ NORMALIZE
+ range >>= 1;
+
+ {
+ UInt32 t;
+ code -= range;
+ t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
+ distance = (distance << 1) + (t + 1);
+ code += range & t;
+ }
+ /*
+ distance <<= 1;
+ if (code >= range)
+ {
+ code -= range;
+ distance |= 1;
+ }
+ */
+ }
+ while (--numDirectBits != 0);
+ prob = probs + Align;
+ distance <<= kNumAlignBits;
+ {
+ unsigned i = 1;
+ GET_BIT2(prob + i, i, ; , distance |= 1);
+ GET_BIT2(prob + i, i, ; , distance |= 2);
+ GET_BIT2(prob + i, i, ; , distance |= 4);
+ GET_BIT2(prob + i, i, ; , distance |= 8);
+ }
+ if (distance == (UInt32)0xFFFFFFFF)
+ {
+ len += kMatchSpecLenStart;
+ state -= kNumStates;
+ break;
+ }
+ }
+ }
+ rep3 = rep2;
+ rep2 = rep1;
+ rep1 = rep0;
+ rep0 = distance + 1;
+ if (checkDicSize == 0)
+ {
+ if (distance >= processedPos)
+ return SZ_ERROR_DATA;
+ }
+ else if (distance >= checkDicSize)
+ return SZ_ERROR_DATA;
+ state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
+ /* state = kLiteralNextStates[state]; */
+ }
+
+ len += kMatchMinLen;
+
+ if (limit == dicPos)
+ return SZ_ERROR_DATA;
+ {
+ SizeT rem = limit - dicPos;
+ unsigned curLen = ((rem < len) ? (unsigned)rem : len);
+ SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
+
+ processedPos += curLen;
+
+ len -= curLen;
+ if (pos + curLen <= dicBufSize)
+ {
+ Byte *dest = dic + dicPos;
+ ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
+ const Byte *lim = dest + curLen;
+ dicPos += curLen;
+ do
+ *(dest) = (Byte)*(dest + src);
+ while (++dest != lim);
+ }
+ else
+ {
+ do
+ {
+ dic[dicPos++] = dic[pos];
+ if (++pos == dicBufSize)
+ pos = 0;
+ }
+ while (--curLen != 0);
+ }
+ }
+ }
+ }
+ while (dicPos < limit && buf < bufLimit);
+ NORMALIZE;
+ p->buf = buf;
+ p->range = range;
+ p->code = code;
+ p->remainLen = len;
+ p->dicPos = dicPos;
+ p->processedPos = processedPos;
+ p->reps[0] = rep0;
+ p->reps[1] = rep1;
+ p->reps[2] = rep2;
+ p->reps[3] = rep3;
+ p->state = state;
+
+ return SZ_OK;
+}
+
+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
+{
+ if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
+ {
+ Byte *dic = p->dic;
+ SizeT dicPos = p->dicPos;
+ SizeT dicBufSize = p->dicBufSize;
+ unsigned len = p->remainLen;
+ UInt32 rep0 = p->reps[0];
+ if (limit - dicPos < len)
+ len = (unsigned)(limit - dicPos);
+
+ if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
+ p->checkDicSize = p->prop.dicSize;
+
+ p->processedPos += len;
+ p->remainLen -= len;
+ while (len-- != 0)
+ {
+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
+ dicPos++;
+ }
+ p->dicPos = dicPos;
+ }
+}
+
+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
+{
+ do
+ {
+ SizeT limit2 = limit;
+ if (p->checkDicSize == 0)
+ {
+ UInt32 rem = p->prop.dicSize - p->processedPos;
+ if (limit - p->dicPos > rem)
+ limit2 = p->dicPos + rem;
+ }
+ RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
+ if (p->processedPos >= p->prop.dicSize)
+ p->checkDicSize = p->prop.dicSize;
+ LzmaDec_WriteRem(p, limit);
+ }
+ while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
+
+ if (p->remainLen > kMatchSpecLenStart)
+ {
+ p->remainLen = kMatchSpecLenStart;
+ }
+ return 0;
+}
+
+typedef enum
+{
+ DUMMY_ERROR, /* unexpected end of input stream */
+ DUMMY_LIT,
+ DUMMY_MATCH,
+ DUMMY_REP
+} ELzmaDummy;
+
+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
+{
+ UInt32 range = p->range;
+ UInt32 code = p->code;
+ const Byte *bufLimit = buf + inSize;
+ CLzmaProb *probs = p->probs;
+ unsigned state = p->state;
+ ELzmaDummy res;
+
+ {
+ CLzmaProb *prob;
+ UInt32 bound;
+ unsigned ttt;
+ unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
+
+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK
+
+ /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
+
+ prob = probs + Literal;
+ if (p->checkDicSize != 0 || p->processedPos != 0)
+ prob += (LZMA_LIT_SIZE *
+ ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
+ (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
+
+ if (state < kNumLitStates)
+ {
+ unsigned symbol = 1;
+ do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
+ }
+ else
+ {
+ unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
+ ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
+ unsigned offs = 0x100;
+ unsigned symbol = 1;
+ do
+ {
+ unsigned bit;
+ CLzmaProb *probLit;
+ matchByte <<= 1;
+ bit = (matchByte & offs);
+ probLit = prob + offs + bit + symbol;
+ GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
+ }
+ while (symbol < 0x100);
+ }
+ res = DUMMY_LIT;
+ }
+ else
+ {
+ unsigned len;
+ UPDATE_1_CHECK;
+
+ prob = probs + IsRep + state;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ state = 0;
+ prob = probs + LenCoder;
+ res = DUMMY_MATCH;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ res = DUMMY_REP;
+ prob = probs + IsRepG0 + state;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ NORMALIZE_CHECK;
+ return DUMMY_REP;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ }
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ prob = probs + IsRepG1 + state;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ prob = probs + IsRepG2 + state;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ }
+ }
+ }
+ state = kNumStates;
+ prob = probs + RepLenCoder;
+ }
+ {
+ unsigned limit, offset;
+ CLzmaProb *probLen = prob + LenChoice;
+ IF_BIT_0_CHECK(probLen)
+ {
+ UPDATE_0_CHECK;
+ probLen = prob + LenLow + (posState << kLenNumLowBits);
+ offset = 0;
+ limit = 1 << kLenNumLowBits;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ probLen = prob + LenChoice2;
+ IF_BIT_0_CHECK(probLen)
+ {
+ UPDATE_0_CHECK;
+ probLen = prob + LenMid + (posState << kLenNumMidBits);
+ offset = kLenNumLowSymbols;
+ limit = 1 << kLenNumMidBits;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ probLen = prob + LenHigh;
+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
+ limit = 1 << kLenNumHighBits;
+ }
+ }
+ TREE_DECODE_CHECK(probLen, limit, len);
+ len += offset;
+ }
+
+ if (state < 4)
+ {
+ unsigned posSlot;
+ prob = probs + PosSlot +
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
+ kNumPosSlotBits);
+ TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
+ if (posSlot >= kStartPosModelIndex)
+ {
+ int numDirectBits = ((posSlot >> 1) - 1);
+
+ /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
+
+ if (posSlot < kEndPosModelIndex)
+ {
+ prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
+ }
+ else
+ {
+ numDirectBits -= kNumAlignBits;
+ do
+ {
+ NORMALIZE_CHECK
+ range >>= 1;
+ code -= range & (((code - range) >> 31) - 1);
+ /* if (code >= range) code -= range; */
+ }
+ while (--numDirectBits != 0);
+ prob = probs + Align;
+ numDirectBits = kNumAlignBits;
+ }
+ {
+ unsigned i = 1;
+ do
+ {
+ GET_BIT_CHECK(prob + i, i);
+ }
+ while (--numDirectBits != 0);
+ }
+ }
+ }
+ }
+ }
+ NORMALIZE_CHECK;
+ return res;
+}
+
+
+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
+{
+ p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
+ p->range = 0xFFFFFFFF;
+ p->needFlush = 0;
+}
+
+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
+{
+ p->needFlush = 1;
+ p->remainLen = 0;
+ p->tempBufSize = 0;
+
+ if (initDic)
+ {
+ p->processedPos = 0;
+ p->checkDicSize = 0;
+ p->needInitState = 1;
+ }
+ if (initState)
+ p->needInitState = 1;
+}
+
+void LzmaDec_Init(CLzmaDec *p)
+{
+ p->dicPos = 0;
+ LzmaDec_InitDicAndState(p, True, True);
+}
+
+static void LzmaDec_InitStateReal(CLzmaDec *p)
+{
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
+ UInt32 i;
+ CLzmaProb *probs = p->probs;
+ for (i = 0; i < numProbs; i++)
+ probs[i] = kBitModelTotal >> 1;
+ p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
+ p->state = 0;
+ p->needInitState = 0;
+}
+
+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
+ ELzmaFinishMode finishMode, ELzmaStatus *status)
+{
+ SizeT inSize = *srcLen;
+ (*srcLen) = 0;
+ LzmaDec_WriteRem(p, dicLimit);
+
+ *status = LZMA_STATUS_NOT_SPECIFIED;
+
+ while (p->remainLen != kMatchSpecLenStart)
+ {
+ int checkEndMarkNow;
+
+ if (p->needFlush != 0)
+ {
+ for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
+ p->tempBuf[p->tempBufSize++] = *src++;
+ if (p->tempBufSize < RC_INIT_SIZE)
+ {
+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
+ return SZ_OK;
+ }
+ if (p->tempBuf[0] != 0)
+ return SZ_ERROR_DATA;
+
+ LzmaDec_InitRc(p, p->tempBuf);
+ p->tempBufSize = 0;
+ }
+
+ checkEndMarkNow = 0;
+ if (p->dicPos >= dicLimit)
+ {
+ if (p->remainLen == 0 && p->code == 0)
+ {
+ *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
+ return SZ_OK;
+ }
+ if (finishMode == LZMA_FINISH_ANY)
+ {
+ *status = LZMA_STATUS_NOT_FINISHED;
+ return SZ_OK;
+ }
+ if (p->remainLen != 0)
+ {
+ *status = LZMA_STATUS_NOT_FINISHED;
+ return SZ_ERROR_DATA;
+ }
+ checkEndMarkNow = 1;
+ }
+
+ if (p->needInitState)
+ LzmaDec_InitStateReal(p);
+
+ if (p->tempBufSize == 0)
+ {
+ SizeT processed;
+ const Byte *bufLimit;
+ if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
+ {
+ int dummyRes = LzmaDec_TryDummy(p, src, inSize);
+ if (dummyRes == DUMMY_ERROR)
+ {
+ memcpy(p->tempBuf, src, inSize);
+ p->tempBufSize = (unsigned)inSize;
+ (*srcLen) += inSize;
+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
+ return SZ_OK;
+ }
+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
+ {
+ *status = LZMA_STATUS_NOT_FINISHED;
+ return SZ_ERROR_DATA;
+ }
+ bufLimit = src;
+ }
+ else
+ bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
+ p->buf = src;
+ if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
+ return SZ_ERROR_DATA;
+ processed = (SizeT)(p->buf - src);
+ (*srcLen) += processed;
+ src += processed;
+ inSize -= processed;
+ }
+ else
+ {
+ unsigned rem = p->tempBufSize, lookAhead = 0;
+ while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
+ p->tempBuf[rem++] = src[lookAhead++];
+ p->tempBufSize = rem;
+ if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
+ {
+ int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
+ if (dummyRes == DUMMY_ERROR)
+ {
+ (*srcLen) += lookAhead;
+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
+ return SZ_OK;
+ }
+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
+ {
+ *status = LZMA_STATUS_NOT_FINISHED;
+ return SZ_ERROR_DATA;
+ }
+ }
+ p->buf = p->tempBuf;
+ if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
+ return SZ_ERROR_DATA;
+ lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
+ (*srcLen) += lookAhead;
+ src += lookAhead;
+ inSize -= lookAhead;
+ p->tempBufSize = 0;
+ }
+ }
+ if (p->code == 0)
+ *status = LZMA_STATUS_FINISHED_WITH_MARK;
+ return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
+}
+
+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
+{
+ SizeT outSize = *destLen;
+ SizeT inSize = *srcLen;
+ *srcLen = *destLen = 0;
+ for (;;)
+ {
+ SizeT inSizeCur = inSize, outSizeCur, dicPos;
+ ELzmaFinishMode curFinishMode;
+ SRes res;
+ if (p->dicPos == p->dicBufSize)
+ p->dicPos = 0;
+ dicPos = p->dicPos;
+ if (outSize > p->dicBufSize - dicPos)
+ {
+ outSizeCur = p->dicBufSize;
+ curFinishMode = LZMA_FINISH_ANY;
+ }
+ else
+ {
+ outSizeCur = dicPos + outSize;
+ curFinishMode = finishMode;
+ }
+
+ res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
+ src += inSizeCur;
+ inSize -= inSizeCur;
+ *srcLen += inSizeCur;
+ outSizeCur = p->dicPos - dicPos;
+ memcpy(dest, p->dic + dicPos, outSizeCur);
+ dest += outSizeCur;
+ outSize -= outSizeCur;
+ *destLen += outSizeCur;
+ if (res != 0)
+ return res;
+ if (outSizeCur == 0 || outSize == 0)
+ return SZ_OK;
+ }
+}
+
+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
+{
+ alloc->Free(alloc, p->probs);
+ p->probs = 0;
+}
+
+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
+{
+ alloc->Free(alloc, p->dic);
+ p->dic = 0;
+}
+
+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
+{
+ LzmaDec_FreeProbs(p, alloc);
+ LzmaDec_FreeDict(p, alloc);
+}
+
+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
+{
+ UInt32 dicSize;
+ Byte d;
+
+ if (size < LZMA_PROPS_SIZE)
+ return SZ_ERROR_UNSUPPORTED;
+ else
+ dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
+
+ if (dicSize < LZMA_DIC_MIN)
+ dicSize = LZMA_DIC_MIN;
+ p->dicSize = dicSize;
+
+ d = data[0];
+ if (d >= (9 * 5 * 5))
+ return SZ_ERROR_UNSUPPORTED;
+
+ p->lc = d % 9;
+ d /= 9;
+ p->pb = d / 5;
+ p->lp = d % 5;
+
+ return SZ_OK;
+}
+
+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
+{
+ UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
+ if (p->probs == 0 || numProbs != p->numProbs)
+ {
+ LzmaDec_FreeProbs(p, alloc);
+ p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
+ p->numProbs = numProbs;
+ if (p->probs == 0)
+ return SZ_ERROR_MEM;
+ }
+ return SZ_OK;
+}
+
+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+{
+ CLzmaProps propNew;
+ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
+ p->prop = propNew;
+ return SZ_OK;
+}
+
+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+{
+ CLzmaProps propNew;
+ SizeT dicBufSize;
+ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
+ dicBufSize = propNew.dicSize;
+ if (p->dic == 0 || dicBufSize != p->dicBufSize)
+ {
+ LzmaDec_FreeDict(p, alloc);
+ p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
+ if (p->dic == 0)
+ {
+ LzmaDec_FreeProbs(p, alloc);
+ return SZ_ERROR_MEM;
+ }
+ }
+ p->dicBufSize = dicBufSize;
+ p->prop = propNew;
+ return SZ_OK;
+}
+
+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+ ELzmaStatus *status, ISzAlloc *alloc)
+{
+ CLzmaDec p;
+ SRes res;
+ SizeT inSize = *srcLen;
+ SizeT outSize = *destLen;
+ *srcLen = *destLen = 0;
+ if (inSize < RC_INIT_SIZE)
+ return SZ_ERROR_INPUT_EOF;
+
+ LzmaDec_Construct(&p);
+ res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
+ if (res != 0)
+ return res;
+ p.dic = dest;
+ p.dicBufSize = outSize;
+
+ LzmaDec_Init(&p);
+
+ *srcLen = inSize;
+ res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
+
+ if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
+ res = SZ_ERROR_INPUT_EOF;
+
+ (*destLen) = p.dicPos;
+ LzmaDec_FreeProbs(&p, alloc);
+ return res;
+}
diff --git a/lib_generic/lzma/LzmaDec.h b/lib_generic/lzma/LzmaDec.h
new file mode 100644
index 0000000..ad7d705
--- /dev/null
+++ b/lib_generic/lzma/LzmaDec.h
@@ -0,0 +1,223 @@
+/* LzmaDec.h -- LZMA Decoder
+2008-10-04 : Igor Pavlov : Public domain */
+
+#ifndef __LZMADEC_H
+#define __LZMADEC_H
+
+#include "Types.h"
+
+/* #define _LZMA_PROB32 */
+/* _LZMA_PROB32 can increase the speed on some CPUs,
+ but memory usage for CLzmaDec::probs will be doubled in that case */
+
+#ifdef _LZMA_PROB32
+#define CLzmaProb UInt32
+#else
+#define CLzmaProb UInt16
+#endif
+
+
+/* ---------- LZMA Properties ---------- */
+
+#define LZMA_PROPS_SIZE 5
+
+typedef struct _CLzmaProps
+{
+ unsigned lc, lp, pb;
+ UInt32 dicSize;
+} CLzmaProps;
+
+/* LzmaProps_Decode - decodes properties
+Returns:
+ SZ_OK
+ SZ_ERROR_UNSUPPORTED - Unsupported properties
+*/
+
+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
+
+
+/* ---------- LZMA Decoder state ---------- */
+
+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
+ Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
+
+#define LZMA_REQUIRED_INPUT_MAX 20
+
+typedef struct
+{
+ CLzmaProps prop;
+ CLzmaProb *probs;
+ Byte *dic;
+ const Byte *buf;
+ UInt32 range, code;
+ SizeT dicPos;
+ SizeT dicBufSize;
+ UInt32 processedPos;
+ UInt32 checkDicSize;
+ unsigned state;
+ UInt32 reps[4];
+ unsigned remainLen;
+ int needFlush;
+ int needInitState;
+ UInt32 numProbs;
+ unsigned tempBufSize;
+ Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
+} CLzmaDec;
+
+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
+
+void LzmaDec_Init(CLzmaDec *p);
+
+/* There are two types of LZMA streams:
+ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
+ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
+
+typedef enum
+{
+ LZMA_FINISH_ANY, /* finish at any point */
+ LZMA_FINISH_END /* block must be finished at the end */
+} ELzmaFinishMode;
+
+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
+
+ You must use LZMA_FINISH_END, when you know that current output buffer
+ covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
+
+ If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
+ and output value of destLen will be less than output buffer size limit.
+ You can check status result also.
+
+ You can use multiple checks to test data integrity after full decompression:
+ 1) Check Result and "status" variable.
+ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
+ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
+ You must use correct finish mode in that case. */
+
+typedef enum
+{
+ LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */
+ LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */
+ LZMA_STATUS_NOT_FINISHED, /* stream was not finished */
+ LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */
+} ELzmaStatus;
+
+/* ELzmaStatus is used only as output value for function call */
+
+
+/* ---------- Interfaces ---------- */
+
+/* There are 3 levels of interfaces:
+ 1) Dictionary Interface
+ 2) Buffer Interface
+ 3) One Call Interface
+ You can select any of these interfaces, but don't mix functions from different
+ groups for same object. */
+
+
+/* There are two variants to allocate state for Dictionary Interface:
+ 1) LzmaDec_Allocate / LzmaDec_Free
+ 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
+ You can use variant 2, if you set dictionary buffer manually.
+ For Buffer Interface you must always use variant 1.
+
+LzmaDec_Allocate* can return:
+ SZ_OK
+ SZ_ERROR_MEM - Memory allocation error
+ SZ_ERROR_UNSUPPORTED - Unsupported properties
+*/
+
+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
+
+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
+
+/* ---------- Dictionary Interface ---------- */
+
+/* You can use it, if you want to eliminate the overhead for data copying from
+ dictionary to some other external buffer.
+ You must work with CLzmaDec variables directly in this interface.
+
+ STEPS:
+ LzmaDec_Constr()
+ LzmaDec_Allocate()
+ for (each new stream)
+ {
+ LzmaDec_Init()
+ while (it needs more decompression)
+ {
+ LzmaDec_DecodeToDic()
+ use data from CLzmaDec::dic and update CLzmaDec::dicPos
+ }
+ }
+ LzmaDec_Free()
+*/
+
+/* LzmaDec_DecodeToDic
+
+ The decoding to internal dictionary buffer (CLzmaDec::dic).
+ You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
+
+finishMode:
+ It has meaning only if the decoding reaches output limit (dicLimit).
+ LZMA_FINISH_ANY - Decode just dicLimit bytes.
+ LZMA_FINISH_END - Stream must be finished after dicLimit.
+
+Returns:
+ SZ_OK
+ status:
+ LZMA_STATUS_FINISHED_WITH_MARK
+ LZMA_STATUS_NOT_FINISHED
+ LZMA_STATUS_NEEDS_MORE_INPUT
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+ SZ_ERROR_DATA - Data error
+*/
+
+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+/* ---------- Buffer Interface ---------- */
+
+/* It's zlib-like interface.
+ See LzmaDec_DecodeToDic description for information about STEPS and return results,
+ but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
+ to work with CLzmaDec variables manually.
+
+finishMode:
+ It has meaning only if the decoding reaches output limit (*destLen).
+ LZMA_FINISH_ANY - Decode just destLen bytes.
+ LZMA_FINISH_END - Stream must be finished after (*destLen).
+*/
+
+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+/* ---------- One Call Interface ---------- */
+
+/* LzmaDecode
+
+finishMode:
+ It has meaning only if the decoding reaches output limit (*destLen).
+ LZMA_FINISH_ANY - Decode just destLen bytes.
+ LZMA_FINISH_END - Stream must be finished after (*destLen).
+
+Returns:
+ SZ_OK
+ status:
+ LZMA_STATUS_FINISHED_WITH_MARK
+ LZMA_STATUS_NOT_FINISHED
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+ SZ_ERROR_DATA - Data error
+ SZ_ERROR_MEM - Memory allocation error
+ SZ_ERROR_UNSUPPORTED - Unsupported properties
+ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
+*/
+
+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+ ELzmaStatus *status, ISzAlloc *alloc);
+
+#endif
diff --git a/lib_generic/lzma/LzmaDecode.c b/lib_generic/lzma/LzmaDecode.c
deleted file mode 100644
index 3470e55..0000000
--- a/lib_generic/lzma/LzmaDecode.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- LzmaDecode.c
- LZMA Decoder (optimized for Speed version)
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this Code, expressly permits you to
- statically or dynamically link your Code (or bind by name) to the
- interfaces of this file without subjecting your linked Code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-#define RC_READ_BYTE (*Buffer++)
-
-#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
- { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
-
-#ifdef _LZMA_IN_CB
-
-#define RC_TEST { if (Buffer == BufferLim) \
- { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
- BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
-
-#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
-
-#else
-
-#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
-
-#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
-
-#endif
-
-#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
-
-#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
-#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
-#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
-
-#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
- { UpdateBit0(p); mi <<= 1; A0; } else \
- { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
-
-#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
-
-#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
- { int i = numLevels; res = 1; \
- do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
- res -= (1 << numLevels); }
-
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-
-
-#define kNumStates 12
-#define kNumLitStates 7
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
-{
- unsigned char prop0;
- if (size < LZMA_PROPERTIES_SIZE)
- return LZMA_RESULT_DATA_ERROR;
- prop0 = propsData[0];
- if (prop0 >= (9 * 5 * 5))
- return LZMA_RESULT_DATA_ERROR;
- {
- for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
- for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
- propsRes->lc = prop0;
- /*
- unsigned char remainder = (unsigned char)(prop0 / 9);
- propsRes->lc = prop0 % 9;
- propsRes->pb = remainder / 5;
- propsRes->lp = remainder % 5;
- */
- }
-
- #ifdef _LZMA_OUT_READ
- {
- int i;
- propsRes->DictionarySize = 0;
- for (i = 0; i < 4; i++)
- propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
- if (propsRes->DictionarySize == 0)
- propsRes->DictionarySize = 1;
- }
- #endif
- return LZMA_RESULT_OK;
-}
-
-#define kLzmaStreamWasFinishedId (-1)
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *InCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
-{
- CProb *p = vs->Probs;
- SizeT nowPos = 0;
- Byte previousByte = 0;
- UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
- UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
- int lc = vs->Properties.lc;
-
- #ifdef _LZMA_OUT_READ
-
- UInt32 Range = vs->Range;
- UInt32 Code = vs->Code;
- #ifdef _LZMA_IN_CB
- const Byte *Buffer = vs->Buffer;
- const Byte *BufferLim = vs->BufferLim;
- #else
- const Byte *Buffer = inStream;
- const Byte *BufferLim = inStream + inSize;
- #endif
- int state = vs->State;
- UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
- int len = vs->RemainLen;
- UInt32 globalPos = vs->GlobalPos;
- UInt32 distanceLimit = vs->DistanceLimit;
-
- Byte *dictionary = vs->Dictionary;
- UInt32 dictionarySize = vs->Properties.DictionarySize;
- UInt32 dictionaryPos = vs->DictionaryPos;
-
- Byte tempDictionary[4];
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
- if (len == kLzmaStreamWasFinishedId)
- return LZMA_RESULT_OK;
-
- if (dictionarySize == 0)
- {
- dictionary = tempDictionary;
- dictionarySize = 1;
- tempDictionary[0] = vs->TempDictionary[0];
- }
-
- if (len == kLzmaNeedInitId)
- {
- {
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- UInt32 i;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- rep0 = rep1 = rep2 = rep3 = 1;
- state = 0;
- globalPos = 0;
- distanceLimit = 0;
- dictionaryPos = 0;
- dictionary[dictionarySize - 1] = 0;
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
- }
- len = 0;
- }
- while(len != 0 && nowPos < outSize)
- {
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- len--;
- }
- if (dictionaryPos == 0)
- previousByte = dictionary[dictionarySize - 1];
- else
- previousByte = dictionary[dictionaryPos - 1];
-
- #else /* if !_LZMA_OUT_READ */
-
- int state = 0;
- UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
- int len = 0;
- const Byte *Buffer;
- const Byte *BufferLim;
- UInt32 Range;
- UInt32 Code;
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
-
- {
- UInt32 i;
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- }
-
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
-
- #endif /* _LZMA_OUT_READ */
-
- while(nowPos < outSize)
- {
- CProb *prob;
- UInt32 bound;
- int posState = (int)(
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & posStateMask);
-
- prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- int symbol = 1;
- UpdateBit0(prob)
- prob = p + Literal + (LZMA_LIT_SIZE *
- (((
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
- if (state >= kNumLitStates)
- {
- int matchByte;
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- matchByte = dictionary[pos];
- #else
- matchByte = outStream[nowPos - rep0];
- #endif
- do
- {
- int bit;
- CProb *probLit;
- matchByte <<= 1;
- bit = (matchByte & 0x100);
- probLit = prob + 0x100 + bit + symbol;
- RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
- }
- while (symbol < 0x100);
- }
- while (symbol < 0x100)
- {
- CProb *probLit = prob + symbol;
- RC_GET_BIT(probLit, symbol)
- }
- previousByte = (Byte)symbol;
-
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
-
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #endif
- if (state < 4) state = 0;
- else if (state < 10) state -= 3;
- else state -= 6;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRep + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- rep3 = rep2;
- rep2 = rep1;
- rep1 = rep0;
- state = state < kNumLitStates ? 0 : 3;
- prob = p + LenCoder;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG0 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos;
- #endif
- UpdateBit0(prob);
-
- #ifdef _LZMA_OUT_READ
- if (distanceLimit == 0)
- #else
- if (nowPos == 0)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- state = state < kNumLitStates ? 9 : 11;
- #ifdef _LZMA_OUT_READ
- pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
- #endif
-
- continue;
- }
- else
- {
- UpdateBit1(prob);
- }
- }
- else
- {
- UInt32 distance;
- UpdateBit1(prob);
- prob = p + IsRepG1 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep1;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG2 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep2;
- }
- else
- {
- UpdateBit1(prob);
- distance = rep3;
- rep3 = rep2;
- }
- rep2 = rep1;
- }
- rep1 = rep0;
- rep0 = distance;
- }
- state = state < kNumLitStates ? 8 : 11;
- prob = p + RepLenCoder;
- }
- {
- int numBits, offset;
- CProb *probLen = prob + LenChoice;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenLow + (posState << kLenNumLowBits);
- offset = 0;
- numBits = kLenNumLowBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenChoice2;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenMid + (posState << kLenNumMidBits);
- offset = kLenNumLowSymbols;
- numBits = kLenNumMidBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenHigh;
- offset = kLenNumLowSymbols + kLenNumMidSymbols;
- numBits = kLenNumHighBits;
- }
- }
- RangeDecoderBitTreeDecode(probLen, numBits, len);
- len += offset;
- }
-
- if (state < 4)
- {
- int posSlot;
- state += kNumLitStates;
- prob = p + PosSlot +
- ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
- kNumPosSlotBits);
- RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
- if (posSlot >= kStartPosModelIndex)
- {
- int numDirectBits = ((posSlot >> 1) - 1);
- rep0 = (2 | ((UInt32)posSlot & 1));
- if (posSlot < kEndPosModelIndex)
- {
- rep0 <<= numDirectBits;
- prob = p + SpecPos + rep0 - posSlot - 1;
- }
- else
- {
- numDirectBits -= kNumAlignBits;
- do
- {
- RC_NORMALIZE
- Range >>= 1;
- rep0 <<= 1;
- if (Code >= Range)
- {
- Code -= Range;
- rep0 |= 1;
- }
- }
- while (--numDirectBits != 0);
- prob = p + Align;
- rep0 <<= kNumAlignBits;
- numDirectBits = kNumAlignBits;
- }
- {
- int i = 1;
- int mi = 1;
- do
- {
- CProb *prob3 = prob + mi;
- RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
- i <<= 1;
- }
- while(--numDirectBits != 0);
- }
- }
- else
- rep0 = posSlot;
- if (++rep0 == (UInt32)(0))
- {
- /* it's for stream version */
- len = kLzmaStreamWasFinishedId;
- break;
- }
- }
-
- len += kMatchMinLen;
- #ifdef _LZMA_OUT_READ
- if (rep0 > distanceLimit)
- #else
- if (rep0 > nowPos)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- #ifdef _LZMA_OUT_READ
- if (dictionarySize - distanceLimit > (UInt32)len)
- distanceLimit += len;
- else
- distanceLimit = dictionarySize;
- #endif
-
- do
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- len--;
- outStream[nowPos++] = previousByte;
- }
- while(len != 0 && nowPos < outSize);
- }
- }
- RC_NORMALIZE;
-
- #ifdef _LZMA_OUT_READ
- vs->Range = Range;
- vs->Code = Code;
- vs->DictionaryPos = dictionaryPos;
- vs->GlobalPos = globalPos + (UInt32)nowPos;
- vs->DistanceLimit = distanceLimit;
- vs->Reps[0] = rep0;
- vs->Reps[1] = rep1;
- vs->Reps[2] = rep2;
- vs->Reps[3] = rep3;
- vs->State = state;
- vs->RemainLen = len;
- vs->TempDictionary[0] = tempDictionary[0];
- #endif
-
- #ifdef _LZMA_IN_CB
- vs->Buffer = Buffer;
- vs->BufferLim = BufferLim;
- #else
- *inSizeProcessed = (SizeT)(Buffer - inStream);
- #endif
- *outSizeProcessed = nowPos;
- return LZMA_RESULT_OK;
-}
diff --git a/lib_generic/lzma/LzmaDecode.h b/lib_generic/lzma/LzmaDecode.h
deleted file mode 100644
index bd75525..0000000
--- a/lib_generic/lzma/LzmaDecode.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- LzmaDecode.h
- LZMA Decoder interface
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-#include "LzmaTypes.h"
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs,
- but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb UInt16
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
- int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-#define LZMA_PROPERTIES_SIZE 5
-
-typedef struct _CLzmaProperties
-{
- int lc;
- int lp;
- int pb;
- #ifdef _LZMA_OUT_READ
- UInt32 DictionarySize;
- #endif
-}CLzmaProperties;
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
-
-#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
-
-#define kLzmaNeedInitId (-2)
-
-typedef struct _CLzmaDecoderState
-{
- CLzmaProperties Properties;
- CProb *Probs;
-
- #ifdef _LZMA_IN_CB
- const unsigned char *Buffer;
- const unsigned char *BufferLim;
- #endif
-
- #ifdef _LZMA_OUT_READ
- unsigned char *Dictionary;
- UInt32 Range;
- UInt32 Code;
- UInt32 DictionaryPos;
- UInt32 GlobalPos;
- UInt32 DistanceLimit;
- UInt32 Reps[4];
- int State;
- int RemainLen;
- unsigned char TempDictionary[4];
- #endif
-} CLzmaDecoderState;
-
-#ifdef _LZMA_OUT_READ
-#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
-#endif
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
-
-#endif
diff --git a/lib_generic/lzma/LzmaTools.c b/lib_generic/lzma/LzmaTools.c
index 5ac42e5..c2a91e5 100644
--- a/lib_generic/lzma/LzmaTools.c
+++ b/lib_generic/lzma/LzmaTools.c
@@ -1,7 +1,7 @@
/*
- * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.57
+ * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.65
*
- * Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
+ * Copyright (C) 2007-2009 Industrie Dial Face S.p.A.
* Luigi 'Comio' Mantellini (luigi.mantellini at idf-hit.com)
*
* Copyright (C) 1999-2005 Igor Pavlov
@@ -40,103 +40,88 @@
#ifdef CONFIG_LZMA
#define LZMA_PROPERTIES_OFFSET 0
-#define LZMA_SIZE_OFFSET LZMA_PROPERTIES_SIZE
+#define LZMA_SIZE_OFFSET LZMA_PROPS_SIZE
#define LZMA_DATA_OFFSET LZMA_SIZE_OFFSET+sizeof(uint64_t)
#include "LzmaTools.h"
-#include "LzmaDecode.h"
+#include "LzmaDec.h"
#include <linux/string.h>
#include <malloc.h>
+static void *SzAlloc(void *p, size_t size) { p = p; return malloc(size); }
+static void SzFree(void *p, void *address) { p = p; free(address); }
+
int lzmaBuffToBuffDecompress (unsigned char *outStream, SizeT *uncompressedSize,
- unsigned char *inStream, SizeT length)
+ unsigned char *inStream, SizeT length)
{
- int res = LZMA_RESULT_DATA_ERROR;
- int i;
-
- SizeT outSizeFull = 0xFFFFFFFF; /* 4GBytes limit */
- SizeT inProcessed;
- SizeT outProcessed;
- SizeT outSize;
- SizeT outSizeHigh;
- CLzmaDecoderState state; /* it's about 24-80 bytes structure, if int is 32-bit */
- unsigned char properties[LZMA_PROPERTIES_SIZE];
- SizeT compressedSize = (SizeT)(length - LZMA_DATA_OFFSET);
-
- debug ("LZMA: Image address............... 0x%lx\n", inStream);
- debug ("LZMA: Properties address.......... 0x%lx\n", inStream + LZMA_PROPERTIES_OFFSET);
- debug ("LZMA: Uncompressed size address... 0x%lx\n", inStream + LZMA_SIZE_OFFSET);
- debug ("LZMA: Compressed data address..... 0x%lx\n", inStream + LZMA_DATA_OFFSET);
- debug ("LZMA: Destination address......... 0x%lx\n", outStream);
-
- memcpy(properties, inStream + LZMA_PROPERTIES_OFFSET, LZMA_PROPERTIES_SIZE);
-
- memset(&state, 0, sizeof(state));
- res = LzmaDecodeProperties(&state.Properties,
- properties,
- LZMA_PROPERTIES_SIZE);
- if (res != LZMA_RESULT_OK) {
- return res;
- }
-
- outSize = 0;
- outSizeHigh = 0;
- /* Read the uncompressed size */
- for (i = 0; i < 8; i++) {
- unsigned char b = inStream[LZMA_SIZE_OFFSET + i];
- if (i < 4) {
- outSize += (UInt32)(b) << (i * 8);
- } else {
- outSizeHigh += (UInt32)(b) << ((i - 4) * 8);
- }
- }
-
- outSizeFull = (SizeT)outSize;
- if (sizeof(SizeT) >= 8) {
- /*
- * SizeT is a 64 bit uint => We can manage files larger than 4GB!
- *
- */
- outSizeFull |= (((SizeT)outSizeHigh << 16) << 16);
- } else if (outSizeHigh != 0 || (UInt32)(SizeT)outSize != outSize) {
- /*
- * SizeT is a 32 bit uint => We cannot manage files larger than
- * 4GB!
- *
- */
- debug ("LZMA: 64bit support not enabled.\n");
- return LZMA_RESULT_DATA_ERROR;
- }
-
- debug ("LZMA: Uncompresed size............ 0x%lx\n", outSizeFull);
- debug ("LZMA: Compresed size.............. 0x%lx\n", compressedSize);
- debug ("LZMA: Dynamic memory needed....... 0x%lx", LzmaGetNumProbs(&state.Properties) * sizeof(CProb));
-
- state.Probs = (CProb *)malloc(LzmaGetNumProbs(&state.Properties) * sizeof(CProb));
-
- if (state.Probs == 0
- || (outStream == 0 && outSizeFull != 0)
- || (inStream == 0 && compressedSize != 0)) {
- free(state.Probs);
- debug ("\n");
- return LZMA_RESULT_DATA_ERROR;
- }
-
- debug (" allocated.\n");
-
- /* Decompress */
-
- res = LzmaDecode(&state,
- inStream + LZMA_DATA_OFFSET, compressedSize, &inProcessed,
- outStream, outSizeFull, &outProcessed);
- if (res != LZMA_RESULT_OK) {
- return res;
- }
-
- *uncompressedSize = outProcessed;
- free(state.Probs);
- return res;
+ int res = SZ_ERROR_DATA;
+ int i;
+ ISzAlloc g_Alloc;
+
+ SizeT outSizeFull = 0xFFFFFFFF; /* 4GBytes limit */
+ SizeT inProcessed;
+ SizeT outProcessed;
+ SizeT outSize;
+ SizeT outSizeHigh;
+ ELzmaStatus state;
+ SizeT compressedSize = (SizeT)(length - LZMA_PROPS_SIZE);
+
+ debug ("LZMA: Image address............... 0x%lx\n", inStream);
+ debug ("LZMA: Properties address.......... 0x%lx\n", inStream + LZMA_PROPERTIES_OFFSET);
+ debug ("LZMA: Uncompressed size address... 0x%lx\n", inStream + LZMA_SIZE_OFFSET);
+ debug ("LZMA: Compressed data address..... 0x%lx\n", inStream + LZMA_DATA_OFFSET);
+ debug ("LZMA: Destination address......... 0x%lx\n", outStream);
+
+ memset(&state, 0, sizeof(state));
+
+ outSize = 0;
+ outSizeHigh = 0;
+ /* Read the uncompressed size */
+ for (i = 0; i < 8; i++) {
+ unsigned char b = inStream[LZMA_SIZE_OFFSET + i];
+ if (i < 4) {
+ outSize += (UInt32)(b) << (i * 8);
+ } else {
+ outSizeHigh += (UInt32)(b) << ((i - 4) * 8);
+ }
+ }
+
+ outSizeFull = (SizeT)outSize;
+ if (sizeof(SizeT) >= 8) {
+ /*
+ * SizeT is a 64 bit uint => We can manage files larger than 4GB!
+ *
+ */
+ outSizeFull |= (((SizeT)outSizeHigh << 16) << 16);
+ } else if (outSizeHigh != 0 || (UInt32)(SizeT)outSize != outSize) {
+ /*
+ * SizeT is a 32 bit uint => We cannot manage files larger than
+ * 4GB!
+ *
+ */
+ debug ("LZMA: 64bit support not enabled.\n");
+ return SZ_ERROR_DATA;
+ }
+
+ debug ("LZMA: Uncompresed size............ 0x%lx\n", outSizeFull);
+ debug ("LZMA: Compresed size.............. 0x%lx\n", compressedSize);
+
+ g_Alloc.Alloc = SzAlloc;
+ g_Alloc.Free = SzFree;
+
+ /* Decompress */
+ outProcessed = outSizeFull;
+ res = LzmaDecode(
+ outStream, &outProcessed,
+ inStream + LZMA_DATA_OFFSET, &compressedSize,
+ inStream, LZMA_PROPS_SIZE, LZMA_FINISH_ANY, &state, &g_Alloc);
+ *uncompressedSize = outProcessed;
+ if (res != SZ_OK) {
+ return res;
+ }
+
+ return res;
}
#endif
diff --git a/lib_generic/lzma/LzmaTools.h b/lib_generic/lzma/LzmaTools.h
index c91fb89..2db80fc 100644
--- a/lib_generic/lzma/LzmaTools.h
+++ b/lib_generic/lzma/LzmaTools.h
@@ -1,5 +1,5 @@
/*
- * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.57
+ * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.65
*
* Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
* Luigi 'Comio' Mantellini (luigi.mantellini at idf-hit.com)
@@ -28,7 +28,7 @@
#ifndef __LZMA_TOOL_H__
#define __LZMA_TOOL_H__
-#include "LzmaTypes.h"
+#include <lzma/LzmaTypes.h>
extern int lzmaBuffToBuffDecompress (unsigned char *outStream, SizeT *uncompressedSize,
unsigned char *inStream, SizeT length);
diff --git a/lib_generic/lzma/LzmaTypes.h b/lib_generic/lzma/LzmaTypes.h
deleted file mode 100644
index 83f96f4..0000000
--- a/lib_generic/lzma/LzmaTypes.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-LzmaTypes.h
-
-Types for LZMA Decoder
-
-This file written and distributed to public domain by Igor Pavlov.
-This file is part of LZMA SDK 4.40 (2006-05-01)
-*/
-
-#ifndef __LZMATYPES_H
-#define __LZMATYPES_H
-
-#ifndef _7ZIP_BYTE_DEFINED
-#define _7ZIP_BYTE_DEFINED
-typedef unsigned char Byte;
-#endif
-
-#ifndef _7ZIP_UINT16_DEFINED
-#define _7ZIP_UINT16_DEFINED
-typedef unsigned short UInt16;
-#endif
-
-#ifndef _7ZIP_UINT32_DEFINED
-#define _7ZIP_UINT32_DEFINED
-#ifdef _LZMA_UINT32_IS_ULONG
-typedef unsigned long UInt32;
-#else
-typedef unsigned int UInt32;
-#endif
-#endif
-
-/* #define _LZMA_NO_SYSTEM_SIZE_T */
-/* You can use it, if you don't want <stddef.h> */
-
-#ifndef _7ZIP_SIZET_DEFINED
-#define _7ZIP_SIZET_DEFINED
-#ifdef _LZMA_NO_SYSTEM_SIZE_T
-typedef UInt32 SizeT;
-#else
-#include <stddef.h>
-typedef size_t SizeT;
-#endif
-#endif
-
-#endif
diff --git a/lib_generic/lzma/Makefile b/lib_generic/lzma/Makefile
index 3400cd9..2916f21 100644
--- a/lib_generic/lzma/Makefile
+++ b/lib_generic/lzma/Makefile
@@ -30,7 +30,9 @@ LIB = $(obj)liblzma.a
SOBJS =
-COBJS-$(CONFIG_LZMA) += LzmaDecode.o LzmaTools.o
+CFLAGS += -D_LZMA_PROB32 -I$(TOPDIR)/include/linux
+
+COBJS-$(CONFIG_LZMA) += LzmaDec.o LzmaTools.o
COBJS = $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/lib_generic/lzma/README.txt b/lib_generic/lzma/README.txt
index fdb3086..23a9be2 100644
--- a/lib_generic/lzma/README.txt
+++ b/lib_generic/lzma/README.txt
@@ -7,14 +7,14 @@ Author: Igor Pavlov
The import is made using the import_lzmasdk.sh script that:
* untars the lzmaXYY.tar.bz2 file (from the download web page)
-* copies the files LzmaDecode.h, LzmaTypes.h, LzmaDecode.c, history.txt,
- LGPL.txt, and lzma.txt from source archive into the lib_lzma directory (pwd).
+* copies the files LzmaDec.h, Types.h, LzmaDec.c, history.txt,
+ and lzma.txt from source archive into the lib_lzma directory (pwd).
Example:
- ./import_lzmasdk.sh ~/lzma457.tar.bz2
+ . import_lzmasdk.sh ~/lzma465.tar.bz2
-Notice: The files from lzma sdk are not _modified_ by this script!
+Notice: The files from lzma sdk are _not modified_ by this script!
The files LzmaTools.{c,h} are provided to export the lzmaBuffToBuffDecompress()
function that wraps the complex LzmaDecode() function from the LZMA SDK. The
diff --git a/lib_generic/lzma/Types.h b/lib_generic/lzma/Types.h
new file mode 100644
index 0000000..2638196
--- /dev/null
+++ b/lib_generic/lzma/Types.h
@@ -0,0 +1,208 @@
+/* Types.h -- Basic types
+2008-11-23 : Igor Pavlov : Public domain */
+
+#ifndef __7Z_TYPES_H
+#define __7Z_TYPES_H
+
+#include <stddef.h>
+
+#ifdef _WIN32
+#include <windows.h>
+#endif
+
+#define SZ_OK 0
+
+#define SZ_ERROR_DATA 1
+#define SZ_ERROR_MEM 2
+#define SZ_ERROR_CRC 3
+#define SZ_ERROR_UNSUPPORTED 4
+#define SZ_ERROR_PARAM 5
+#define SZ_ERROR_INPUT_EOF 6
+#define SZ_ERROR_OUTPUT_EOF 7
+#define SZ_ERROR_READ 8
+#define SZ_ERROR_WRITE 9
+#define SZ_ERROR_PROGRESS 10
+#define SZ_ERROR_FAIL 11
+#define SZ_ERROR_THREAD 12
+
+#define SZ_ERROR_ARCHIVE 16
+#define SZ_ERROR_NO_ARCHIVE 17
+
+typedef int SRes;
+
+#ifdef _WIN32
+typedef DWORD WRes;
+#else
+typedef int WRes;
+#endif
+
+#ifndef RINOK
+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
+#endif
+
+typedef unsigned char Byte;
+typedef short Int16;
+typedef unsigned short UInt16;
+
+#ifdef _LZMA_UINT32_IS_ULONG
+typedef long Int32;
+typedef unsigned long UInt32;
+#else
+typedef int Int32;
+typedef unsigned int UInt32;
+#endif
+
+#ifdef _SZ_NO_INT_64
+
+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
+ NOTES: Some code will work incorrectly in that case! */
+
+typedef long Int64;
+typedef unsigned long UInt64;
+
+#else
+
+#if defined(_MSC_VER) || defined(__BORLANDC__)
+typedef __int64 Int64;
+typedef unsigned __int64 UInt64;
+#else
+typedef long long int Int64;
+typedef unsigned long long int UInt64;
+#endif
+
+#endif
+
+#ifdef _LZMA_NO_SYSTEM_SIZE_T
+typedef UInt32 SizeT;
+#else
+typedef size_t SizeT;
+#endif
+
+typedef int Bool;
+#define True 1
+#define False 0
+
+
+#ifdef _MSC_VER
+
+#if _MSC_VER >= 1300
+#define MY_NO_INLINE __declspec(noinline)
+#else
+#define MY_NO_INLINE
+#endif
+
+#define MY_CDECL __cdecl
+#define MY_STD_CALL __stdcall
+#define MY_FAST_CALL MY_NO_INLINE __fastcall
+
+#else
+
+#define MY_CDECL
+#define MY_STD_CALL
+#define MY_FAST_CALL
+
+#endif
+
+
+/* The following interfaces use first parameter as pointer to structure */
+
+typedef struct
+{
+ SRes (*Read)(void *p, void *buf, size_t *size);
+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
+ (output(*size) < input(*size)) is allowed */
+} ISeqInStream;
+
+/* it can return SZ_ERROR_INPUT_EOF */
+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
+
+typedef struct
+{
+ size_t (*Write)(void *p, const void *buf, size_t size);
+ /* Returns: result - the number of actually written bytes.
+ (result < size) means error */
+} ISeqOutStream;
+
+typedef enum
+{
+ SZ_SEEK_SET = 0,
+ SZ_SEEK_CUR = 1,
+ SZ_SEEK_END = 2
+} ESzSeek;
+
+typedef struct
+{
+ SRes (*Read)(void *p, void *buf, size_t *size); /* same as ISeqInStream::Read */
+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
+} ISeekInStream;
+
+typedef struct
+{
+ SRes (*Look)(void *p, void **buf, size_t *size);
+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
+ (output(*size) > input(*size)) is not allowed
+ (output(*size) < input(*size)) is allowed */
+ SRes (*Skip)(void *p, size_t offset);
+ /* offset must be <= output(*size) of Look */
+
+ SRes (*Read)(void *p, void *buf, size_t *size);
+ /* reads directly (without buffer). It's same as ISeqInStream::Read */
+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
+} ILookInStream;
+
+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
+
+/* reads via ILookInStream::Read */
+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
+
+#define LookToRead_BUF_SIZE (1 << 14)
+
+typedef struct
+{
+ ILookInStream s;
+ ISeekInStream *realStream;
+ size_t pos;
+ size_t size;
+ Byte buf[LookToRead_BUF_SIZE];
+} CLookToRead;
+
+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
+void LookToRead_Init(CLookToRead *p);
+
+typedef struct
+{
+ ISeqInStream s;
+ ILookInStream *realStream;
+} CSecToLook;
+
+void SecToLook_CreateVTable(CSecToLook *p);
+
+typedef struct
+{
+ ISeqInStream s;
+ ILookInStream *realStream;
+} CSecToRead;
+
+void SecToRead_CreateVTable(CSecToRead *p);
+
+typedef struct
+{
+ SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
+ /* Returns: result. (result != SZ_OK) means break.
+ Value (UInt64)(Int64)-1 for size means unknown value. */
+} ICompressProgress;
+
+typedef struct
+{
+ void *(*Alloc)(void *p, size_t size);
+ void (*Free)(void *p, void *address); /* address can be 0 */
+} ISzAlloc;
+
+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
+#define IAlloc_Free(p, a) (p)->Free((p), a)
+
+#endif
diff --git a/lib_generic/lzma/history.txt b/lib_generic/lzma/history.txt
index dad1858..9bed5eb 100644
--- a/lib_generic/lzma/history.txt
+++ b/lib_generic/lzma/history.txt
@@ -1,198 +1,236 @@
-HISTORY of the LZMA SDK
------------------------
-
- 4.57 2007-12-12
- -------------------------
- - Speed optimizations in ?++ LZMA Decoder.
- - Small changes for more compatibility with some C/C++ compilers.
-
-
- 4.49 beta 2007-07-05
- -------------------------
- - .7z ANSI-C Decoder:
- - now it supports BCJ and BCJ2 filters
- - now it supports files larger than 4 GB.
- - now it supports "Last Write Time" field for files.
- - C++ code for .7z archives compressing/decompressing from 7-zip
- was included to LZMA SDK.
-
-
- 4.43 2006-06-04
- -------------------------
- - Small changes for more compatibility with some C/C++ compilers.
-
-
- 4.42 2006-05-15
- -------------------------
- - Small changes in .h files in ANSI-C version.
-
-
- 4.39 beta 2006-04-14
- -------------------------
- - Bug in versions 4.33b:4.38b was fixed:
- C++ version of LZMA encoder could not correctly compress
- files larger than 2 GB with HC4 match finder (-mfhc4).
-
-
- 4.37 beta 2005-04-06
- -------------------------
- - Fixes in C++ code: code could no be compiled if _NO_EXCEPTIONS was defined.
-
-
- 4.35 beta 2005-03-02
- -------------------------
- - Bug was fixed in C++ version of LZMA Decoder:
- If encoded stream was corrupted, decoder could access memory
- outside of allocated range.
-
-
- 4.34 beta 2006-02-27
- -------------------------
- - Compressing speed and memory requirements for compressing were increased
- - LZMA now can use only these match finders: HC4, BT2, BT3, BT4
-
-
- 4.32 2005-12-09
- -------------------------
- - Java version of LZMA SDK was included
-
-
- 4.30 2005-11-20
- -------------------------
- - Compression ratio was improved in -a2 mode
- - Speed optimizations for compressing in -a2 mode
- - -fb switch now supports values up to 273
- - Bug in 7z_C (7zIn.c) was fixed:
- It used Alloc/Free functions from different memory pools.
- So if program used two memory pools, it worked incorrectly.
- - 7z_C: .7z format supporting was improved
- - LZMA# SDK (C#.NET version) was included
-
-
- 4.27 (Updated) 2005-09-21
- -------------------------
- - Some GUIDs/interfaces in C++ were changed.
- IStream.h:
- ISequentialInStream::Read now works as old ReadPart
- ISequentialOutStream::Write now works as old WritePart
-
-
- 4.27 2005-08-07
- -------------------------
- - Bug in LzmaDecodeSize.c was fixed:
- if _LZMA_IN_CB and _LZMA_OUT_READ were defined,
- decompressing worked incorrectly.
-
-
- 4.26 2005-08-05
- -------------------------
- - Fixes in 7z_C code and LzmaTest.c:
- previous versions could work incorrectly,
- if malloc(0) returns 0
-
-
- 4.23 2005-06-29
- -------------------------
- - Small fixes in C++ code
-
-
- 4.22 2005-06-10
- -------------------------
- - Small fixes
-
-
- 4.21 2005-06-08
- -------------------------
- - Interfaces for ANSI-C LZMA Decoder (LzmaDecode.c) were changed
- - New additional version of ANSI-C LZMA Decoder with zlib-like interface:
- - LzmaStateDecode.h
- - LzmaStateDecode.c
- - LzmaStateTest.c
- - ANSI-C LZMA Decoder now can decompress files larger than 4 GB
-
-
- 4.17 2005-04-18
- -------------------------
- - New example for RAM->RAM compressing/decompressing:
- LZMA + BCJ (filter for x86 code):
- - LzmaRam.h
- - LzmaRam.cpp
- - LzmaRamDecode.h
- - LzmaRamDecode.c
- - -f86 switch for lzma.exe
-
-
- 4.16 2005-03-29
- -------------------------
- - Bug was fixed in LzmaDecode.c (ANSI-C LZMA Decoder):
- If _LZMA_OUT_READ was defined, and if encoded stream was corrupted,
- decoder could access memory outside of allocated range.
- - Speed optimization of ANSI-C LZMA Decoder (now it's about 20% faster).
- Old version of LZMA Decoder now is in file LzmaDecodeSize.c.
- LzmaDecodeSize.c can provide slightly smaller code than LzmaDecode.c
- - Small speed optimization in LZMA C++ code
- - filter for SPARC's code was added
- - Simplified version of .7z ANSI-C Decoder was included
-
-
- 4.06 2004-09-05
- -------------------------
- - Bug in v4.05 was fixed:
- LZMA-Encoder didn't release output stream in some cases.
-
-
- 4.05 2004-08-25
- -------------------------
- - Source code of filters for x86, IA-64, ARM, ARM-Thumb
- and PowerPC code was included to SDK
- - Some internal minor changes
-
-
- 4.04 2004-07-28
- -------------------------
- - More compatibility with some C++ compilers
-
-
- 4.03 2004-06-18
- -------------------------
- - "Benchmark" command was added. It measures compressing
- and decompressing speed and shows rating values.
- Also it checks hardware errors.
-
-
- 4.02 2004-06-10
- -------------------------
- - C++ LZMA Encoder/Decoder code now is more portable
- and it can be compiled by GCC on Linux.
-
-
- 4.01 2004-02-15
- -------------------------
- - Some detection of data corruption was enabled.
- LzmaDecode.c / RangeDecoderReadByte
- .....
- {
- rd->ExtraBytes = 1;
- return 0xFF;
- }
-
-
- 4.00 2004-02-13
- -------------------------
- - Original version of LZMA SDK
-
-
-
-HISTORY of the LZMA
--------------------
- 2001-2007: Improvements to LZMA compressing/decompressing code,
- keeping compatibility with original LZMA format
- 1996-2001: Development of LZMA compression format
-
- Some milestones:
-
- 2001-08-30: LZMA compression was added to 7-Zip
- 1999-01-02: First version of 7-Zip was released
-
-
-End of document
+HISTORY of the LZMA SDK
+-----------------------
+
+4.65 2009-02-03
+-------------------------
+- Some minor fixes
+
+
+4.63 2008-12-31
+-------------------------
+- Some minor fixes
+
+
+4.61 beta 2008-11-23
+-------------------------
+- The bug in ANSI-C LZMA Decoder was fixed:
+ If encoded stream was corrupted, decoder could access memory
+ outside of allocated range.
+- Some changes in ANSI-C 7z Decoder interfaces.
+- LZMA SDK is placed in the public domain.
+
+
+4.60 beta 2008-08-19
+-------------------------
+- Some minor fixes.
+
+
+4.59 beta 2008-08-13
+-------------------------
+- The bug was fixed:
+ LZMA Encoder in fast compression mode could access memory outside of
+ allocated range in some rare cases.
+
+
+4.58 beta 2008-05-05
+-------------------------
+- ANSI-C LZMA Decoder was rewritten for speed optimizations.
+- ANSI-C LZMA Encoder was included to LZMA SDK.
+- C++ LZMA code now is just wrapper over ANSI-C code.
+
+
+4.57 2007-12-12
+-------------------------
+- Speed optimizations in ?++ LZMA Decoder.
+- Small changes for more compatibility with some C/C++ compilers.
+
+
+4.49 beta 2007-07-05
+-------------------------
+- .7z ANSI-C Decoder:
+ - now it supports BCJ and BCJ2 filters
+ - now it supports files larger than 4 GB.
+ - now it supports "Last Write Time" field for files.
+- C++ code for .7z archives compressing/decompressing from 7-zip
+ was included to LZMA SDK.
+
+
+4.43 2006-06-04
+-------------------------
+- Small changes for more compatibility with some C/C++ compilers.
+
+
+4.42 2006-05-15
+-------------------------
+- Small changes in .h files in ANSI-C version.
+
+
+4.39 beta 2006-04-14
+-------------------------
+- The bug in versions 4.33b:4.38b was fixed:
+ C++ version of LZMA encoder could not correctly compress
+ files larger than 2 GB with HC4 match finder (-mfhc4).
+
+
+4.37 beta 2005-04-06
+-------------------------
+- Fixes in C++ code: code could no be compiled if _NO_EXCEPTIONS was defined.
+
+
+4.35 beta 2005-03-02
+-------------------------
+- The bug was fixed in C++ version of LZMA Decoder:
+ If encoded stream was corrupted, decoder could access memory
+ outside of allocated range.
+
+
+4.34 beta 2006-02-27
+-------------------------
+- Compressing speed and memory requirements for compressing were increased
+- LZMA now can use only these match finders: HC4, BT2, BT3, BT4
+
+
+4.32 2005-12-09
+-------------------------
+- Java version of LZMA SDK was included
+
+
+4.30 2005-11-20
+-------------------------
+- Compression ratio was improved in -a2 mode
+- Speed optimizations for compressing in -a2 mode
+- -fb switch now supports values up to 273
+- The bug in 7z_C (7zIn.c) was fixed:
+ It used Alloc/Free functions from different memory pools.
+ So if program used two memory pools, it worked incorrectly.
+- 7z_C: .7z format supporting was improved
+- LZMA# SDK (C#.NET version) was included
+
+
+4.27 (Updated) 2005-09-21
+-------------------------
+- Some GUIDs/interfaces in C++ were changed.
+ IStream.h:
+ ISequentialInStream::Read now works as old ReadPart
+ ISequentialOutStream::Write now works as old WritePart
+
+
+4.27 2005-08-07
+-------------------------
+- The bug in LzmaDecodeSize.c was fixed:
+ if _LZMA_IN_CB and _LZMA_OUT_READ were defined,
+ decompressing worked incorrectly.
+
+
+4.26 2005-08-05
+-------------------------
+- Fixes in 7z_C code and LzmaTest.c:
+ previous versions could work incorrectly,
+ if malloc(0) returns 0
+
+
+4.23 2005-06-29
+-------------------------
+- Small fixes in C++ code
+
+
+4.22 2005-06-10
+-------------------------
+- Small fixes
+
+
+4.21 2005-06-08
+-------------------------
+- Interfaces for ANSI-C LZMA Decoder (LzmaDecode.c) were changed
+- New additional version of ANSI-C LZMA Decoder with zlib-like interface:
+ - LzmaStateDecode.h
+ - LzmaStateDecode.c
+ - LzmaStateTest.c
+- ANSI-C LZMA Decoder now can decompress files larger than 4 GB
+
+
+4.17 2005-04-18
+-------------------------
+- New example for RAM->RAM compressing/decompressing:
+ LZMA + BCJ (filter for x86 code):
+ - LzmaRam.h
+ - LzmaRam.cpp
+ - LzmaRamDecode.h
+ - LzmaRamDecode.c
+ - -f86 switch for lzma.exe
+
+
+4.16 2005-03-29
+-------------------------
+- The bug was fixed in LzmaDecode.c (ANSI-C LZMA Decoder):
+ If _LZMA_OUT_READ was defined, and if encoded stream was corrupted,
+ decoder could access memory outside of allocated range.
+- Speed optimization of ANSI-C LZMA Decoder (now it's about 20% faster).
+ Old version of LZMA Decoder now is in file LzmaDecodeSize.c.
+ LzmaDecodeSize.c can provide slightly smaller code than LzmaDecode.c
+- Small speed optimization in LZMA C++ code
+- filter for SPARC's code was added
+- Simplified version of .7z ANSI-C Decoder was included
+
+
+4.06 2004-09-05
+-------------------------
+- The bug in v4.05 was fixed:
+ LZMA-Encoder didn't release output stream in some cases.
+
+
+4.05 2004-08-25
+-------------------------
+- Source code of filters for x86, IA-64, ARM, ARM-Thumb
+ and PowerPC code was included to SDK
+- Some internal minor changes
+
+
+4.04 2004-07-28
+-------------------------
+- More compatibility with some C++ compilers
+
+
+4.03 2004-06-18
+-------------------------
+- "Benchmark" command was added. It measures compressing
+ and decompressing speed and shows rating values.
+ Also it checks hardware errors.
+
+
+4.02 2004-06-10
+-------------------------
+- C++ LZMA Encoder/Decoder code now is more portable
+ and it can be compiled by GCC on Linux.
+
+
+4.01 2004-02-15
+-------------------------
+- Some detection of data corruption was enabled.
+ LzmaDecode.c / RangeDecoderReadByte
+ .....
+ {
+ rd->ExtraBytes = 1;
+ return 0xFF;
+ }
+
+
+4.00 2004-02-13
+-------------------------
+- Original version of LZMA SDK
+
+
+
+HISTORY of the LZMA
+-------------------
+ 2001-2008: Improvements to LZMA compressing/decompressing code,
+ keeping compatibility with original LZMA format
+ 1996-2001: Development of LZMA compression format
+
+ Some milestones:
+
+ 2001-08-30: LZMA compression was added to 7-Zip
+ 1999-01-02: First version of 7-Zip was released
+
+
+End of document
diff --git a/lib_generic/lzma/import_lzmasdk.sh b/lib_generic/lzma/import_lzmasdk.sh
index 5212e48..1e0f686 100644
--- a/lib_generic/lzma/import_lzmasdk.sh
+++ b/lib_generic/lzma/import_lzmasdk.sh
@@ -17,14 +17,12 @@ fi
BASENAME=`basename $1 .tar.bz2`
TMPDIR=/tmp/tmp_lib_$BASENAME
-FILES="C/Compress/Lzma/LzmaDecode.h
- C/Compress/Lzma/LzmaTypes.h
- C/Compress/Lzma/LzmaDecode.c
+FILES="C/LzmaDec.h
+ C/Types.h
+ C/LzmaDec.c
history.txt
- LGPL.txt
lzma.txt"
-
mkdir -p $TMPDIR
echo "Untar $1 -> $TMPDIR"
tar -jxf $1 -C $TMPDIR
diff --git a/lib_generic/lzma/license.txt b/lib_generic/lzma/license.txt
new file mode 100644
index 0000000..48b9820
--- /dev/null
+++ b/lib_generic/lzma/license.txt
@@ -0,0 +1,3 @@
+ License
+
+LZMA SDK is placed in the public domain.
diff --git a/lib_generic/lzma/lzma.txt b/lib_generic/lzma/lzma.txt
index 5f1a0c9..d4f4af9 100644
--- a/lib_generic/lzma/lzma.txt
+++ b/lib_generic/lzma/lzma.txt
@@ -1,663 +1,594 @@
-LZMA SDK 4.57
--------------
-
-LZMA SDK Copyright (C) 1999-2007 Igor Pavlov
-
-LZMA SDK provides the documentation, samples, header files, libraries,
-and tools you need to develop applications that use LZMA compression.
-
-LZMA is default and general compression method of 7z format
-in 7-Zip compression program (www.7-zip.org). LZMA provides high
-compression ratio and very fast decompression.
-
-LZMA is an improved version of famous LZ77 compression algorithm.
-It was improved in way of maximum increasing of compression ratio,
-keeping high decompression speed and low memory requirements for
-decompressing.
-
-
-
-LICENSE
--------
-
-LZMA SDK is available under any of the following licenses:
-
-1) GNU Lesser General Public License (GNU LGPL)
-2) Common Public License (CPL)
-3) Simplified license for unmodified code (read SPECIAL EXCEPTION)
-4) Proprietary license
-
-It means that you can select one of these four options and follow rules of that license.
-
-
-1,2) GNU LGPL and CPL licenses are pretty similar and both these
-licenses are classified as
- - "Free software licenses" at http://www.gnu.org/
- - "OSI-approved" at http://www.opensource.org/
-
-
-3) SPECIAL EXCEPTION
-
-Igor Pavlov, as the author of this code, expressly permits you
-to statically or dynamically link your code (or bind by name)
-to the files from LZMA SDK without subjecting your linked
-code to the terms of the CPL or GNU LGPL.
-Any modifications or additions to files from LZMA SDK, however,
-are subject to the GNU LGPL or CPL terms.
-
-SPECIAL EXCEPTION allows you to use LZMA SDK in applications with closed code,
-while you keep LZMA SDK code unmodified.
-
-
-SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly permits
-you to use this code under the same terms and conditions contained in the License
-Agreement you have for any previous version of LZMA SDK developed by Igor Pavlov.
-
-SPECIAL EXCEPTION #2 allows owners of proprietary licenses to use latest version
-of LZMA SDK as update for previous versions.
-
-
-SPECIAL EXCEPTION #3: Igor Pavlov, as the author of this code, expressly permits
-you to use code of the following files:
-BranchTypes.h, LzmaTypes.h, LzmaTest.c, LzmaStateTest.c, LzmaAlone.cpp,
-LzmaAlone.cs, LzmaAlone.java
-as public domain code.
-
-
-4) Proprietary license
-
-LZMA SDK also can be available under a proprietary license which
-can include:
-
-1) Right to modify code without subjecting modified code to the
-terms of the CPL or GNU LGPL
-2) Technical support for code
-
-To request such proprietary license or any additional consultations,
-send email message from that page:
-http://www.7-zip.org/support.html
-
-
-You should have received a copy of the GNU Lesser General Public
-License along with this library; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-You should have received a copy of the Common Public License
-along with this library.
-
-
-LZMA SDK Contents
------------------
-
-LZMA SDK includes:
-
- - C++ source code of LZMA compressing and decompressing
- - ANSI-C compatible source code for LZMA decompressing
- - C# source code for LZMA compressing and decompressing
- - Java source code for LZMA compressing and decompressing
- - Compiled file->file LZMA compressing/decompressing program for Windows system
-
-ANSI-C LZMA decompression code was ported from original C++ sources to C.
-Also it was simplified and optimized for code size.
-But it is fully compatible with LZMA from 7-Zip.
-
-
-UNIX/Linux version
-------------------
-To compile C++ version of file->file LZMA, go to directory
-C/7zip/Compress/LZMA_Alone
-and type "make" or "make clean all" to recompile all.
-
-In some UNIX/Linux versions you must compile LZMA with static libraries.
-To compile with static libraries, change string in makefile
-LIB = -lm
-to string
-LIB = -lm -static
-
-
-Files
----------------------
-C - C source code
-CPP - CPP source code
-CS - C# source code
-Java - Java source code
-lzma.txt - LZMA SDK description (this file)
-7zFormat.txt - 7z Format description
-7zC.txt - 7z ANSI-C Decoder description (this file)
-methods.txt - Compression method IDs for .7z
-LGPL.txt - GNU Lesser General Public License
-CPL.html - Common Public License
-lzma.exe - Compiled file->file LZMA encoder/decoder for Windows
-history.txt - history of the LZMA SDK
-
-
-Source code structure
----------------------
-
-C - C files
- Compress - files related to compression/decompression
- Lz - files related to LZ (Lempel-Ziv) compression algorithm
- Lzma - ANSI-C compatible LZMA decompressor
-
- LzmaDecode.h - interface for LZMA decoding on ANSI-C
- LzmaDecode.c - LZMA decoding on ANSI-C (new fastest version)
- LzmaDecodeSize.c - LZMA decoding on ANSI-C (old size-optimized version)
- LzmaTest.c - test application that decodes LZMA encoded file
- LzmaTypes.h - basic types for LZMA Decoder
- LzmaStateDecode.h - interface for LZMA decoding (State version)
- LzmaStateDecode.c - LZMA decoding on ANSI-C (State version)
- LzmaStateTest.c - test application (State version)
-
- Branch - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code
-
- Archive - files related to archiving
- 7z_C - 7z ANSI-C Decoder
-
-
-CPP -- CPP files
-
- Common - common files for C++ projects
- Windows - common files for Windows related code
- 7zip - files related to 7-Zip Project
-
- Common - common files for 7-Zip
-
- Compress - files related to compression/decompression
-
- LZ - files related to LZ (Lempel-Ziv) compression algorithm
-
- Copy - Copy coder
- RangeCoder - Range Coder (special code of compression/decompression)
- LZMA - LZMA compression/decompression on C++
- LZMA_Alone - file->file LZMA compression/decompression
-
- Branch - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code
-
- Archive - files related to archiving
-
- Common - common files for archive handling
- 7z - 7z C++ Encoder/Decoder
-
- Bundles - Modules that are bundles of other modules
-
- Alone7z - 7zr.exe: Standalone version of 7z.exe that supports only 7z/LZMA/BCJ/BCJ2
- Format7zR - 7zr.dll: Reduced version of 7za.dll: extracting/compressing to 7z/LZMA/BCJ/BCJ2
- Format7zExtractR - 7zxr.dll: Reduced version of 7zxa.dll: extracting from 7z/LZMA/BCJ/BCJ2.
-
- UI - User Interface files
-
- Client7z - Test application for 7za.dll, 7zr.dll, 7zxr.dll
- Common - Common UI files
- Console - Code for console archiver
-
-
-
-CS - C# files
- 7zip
- Common - some common files for 7-Zip
- Compress - files related to compression/decompression
- LZ - files related to LZ (Lempel-Ziv) compression algorithm
- LZMA - LZMA compression/decompression
- LzmaAlone - file->file LZMA compression/decompression
- RangeCoder - Range Coder (special code of compression/decompression)
-
-Java - Java files
- SevenZip
- Compression - files related to compression/decompression
- LZ - files related to LZ (Lempel-Ziv) compression algorithm
- LZMA - LZMA compression/decompression
- RangeCoder - Range Coder (special code of compression/decompression)
-
-C/C++ source code of LZMA SDK is part of 7-Zip project.
-
-You can find ANSI-C LZMA decompressing code at folder
- C/7zip/Compress/Lzma
-7-Zip doesn't use that ANSI-C LZMA code and that code was developed
-specially for this SDK. And files from C/7zip/Compress/Lzma do not need
-files from other directories of SDK for compiling.
-
-7-Zip source code can be downloaded from 7-Zip's SourceForge page:
-
- http://sourceforge.net/projects/sevenzip/
-
-
-LZMA features
--------------
- - Variable dictionary size (up to 1 GB)
- - Estimated compressing speed: about 1 MB/s on 1 GHz CPU
- - Estimated decompressing speed:
- - 8-12 MB/s on 1 GHz Intel Pentium 3 or AMD Athlon
- - 500-1000 KB/s on 100 MHz ARM, MIPS, PowerPC or other simple RISC
- - Small memory requirements for decompressing (8-32 KB + DictionarySize)
- - Small code size for decompressing: 2-8 KB (depending from
- speed optimizations)
-
-LZMA decoder uses only integer operations and can be
-implemented in any modern 32-bit CPU (or on 16-bit CPU with some conditions).
-
-Some critical operations that affect to speed of LZMA decompression:
- 1) 32*16 bit integer multiply
- 2) Misspredicted branches (penalty mostly depends from pipeline length)
- 3) 32-bit shift and arithmetic operations
-
-Speed of LZMA decompressing mostly depends from CPU speed.
-Memory speed has no big meaning. But if your CPU has small data cache,
-overall weight of memory speed will slightly increase.
-
-
-How To Use
-----------
-
-Using LZMA encoder/decoder executable
---------------------------------------
-
-Usage: LZMA <e|d> inputFile outputFile [<switches>...]
-
- e: encode file
-
- d: decode file
-
- b: Benchmark. There are two tests: compressing and decompressing
- with LZMA method. Benchmark shows rating in MIPS (million
- instructions per second). Rating value is calculated from
- measured speed and it is normalized with AMD Athlon 64 X2 CPU
- results. Also Benchmark checks possible hardware errors (RAM
- errors in most cases). Benchmark uses these settings:
- (-a1, -d21, -fb32, -mfbt4). You can change only -d. Also you
- can change number of iterations. Example for 30 iterations:
- LZMA b 30
- Default number of iterations is 10.
-
-<Switches>
-
-
- -a{N}: set compression mode 0 = fast, 1 = normal
- default: 1 (normal)
-
- d{N}: Sets Dictionary size - [0, 30], default: 23 (8MB)
- The maximum value for dictionary size is 1 GB = 2^30 bytes.
- Dictionary size is calculated as DictionarySize = 2^N bytes.
- For decompressing file compressed by LZMA method with dictionary
- size D = 2^N you need about D bytes of memory (RAM).
-
- -fb{N}: set number of fast bytes - [5, 273], default: 128
- Usually big number gives a little bit better compression ratio
- and slower compression process.
-
- -lc{N}: set number of literal context bits - [0, 8], default: 3
- Sometimes lc=4 gives gain for big files.
-
- -lp{N}: set number of literal pos bits - [0, 4], default: 0
- lp switch is intended for periodical data when period is
- equal 2^N. For example, for 32-bit (4 bytes)
- periodical data you can use lp=2. Often it's better to set lc0,
- if you change lp switch.
-
- -pb{N}: set number of pos bits - [0, 4], default: 2
- pb switch is intended for periodical data
- when period is equal 2^N.
-
- -mf{MF_ID}: set Match Finder. Default: bt4.
- Algorithms from hc* group doesn't provide good compression
- ratio, but they often works pretty fast in combination with
- fast mode (-a0).
-
- Memory requirements depend from dictionary size
- (parameter "d" in table below).
-
- MF_ID Memory Description
-
- bt2 d * 9.5 + 4MB Binary Tree with 2 bytes hashing.
- bt3 d * 11.5 + 4MB Binary Tree with 3 bytes hashing.
- bt4 d * 11.5 + 4MB Binary Tree with 4 bytes hashing.
- hc4 d * 7.5 + 4MB Hash Chain with 4 bytes hashing.
-
- -eos: write End Of Stream marker. By default LZMA doesn't write
- eos marker, since LZMA decoder knows uncompressed size
- stored in .lzma file header.
-
- -si: Read data from stdin (it will write End Of Stream marker).
- -so: Write data to stdout
-
-
-Examples:
-
-1) LZMA e file.bin file.lzma -d16 -lc0
-
-compresses file.bin to file.lzma with 64 KB dictionary (2^16=64K)
-and 0 literal context bits. -lc0 allows to reduce memory requirements
-for decompression.
-
-
-2) LZMA e file.bin file.lzma -lc0 -lp2
-
-compresses file.bin to file.lzma with settings suitable
-for 32-bit periodical data (for example, ARM or MIPS code).
-
-3) LZMA d file.lzma file.bin
-
-decompresses file.lzma to file.bin.
-
-
-Compression ratio hints
------------------------
-
-Recommendations
----------------
-
-To increase compression ratio for LZMA compressing it's desirable
-to have aligned data (if it's possible) and also it's desirable to locate
-data in such order, where code is grouped in one place and data is
-grouped in other place (it's better than such mixing: code, data, code,
-data, ...).
-
-
-Using Filters
--------------
-You can increase compression ratio for some data types, using
-special filters before compressing. For example, it's possible to
-increase compression ratio on 5-10% for code for those CPU ISAs:
-x86, IA-64, ARM, ARM-Thumb, PowerPC, SPARC.
-
-You can find C/C++ source code of such filters in folder "7zip/Compress/Branch"
-
-You can check compression ratio gain of these filters with such
-7-Zip commands (example for ARM code):
-No filter:
- 7z a a1.7z a.bin -m0=lzma
-
-With filter for little-endian ARM code:
- 7z a a2.7z a.bin -m0=bc_arm -m1=lzma
-
-With filter for big-endian ARM code (using additional Swap4 filter):
- 7z a a3.7z a.bin -m0=swap4 -m1=bc_arm -m2=lzma
-
-It works in such manner:
-Compressing = Filter_encoding + LZMA_encoding
-Decompressing = LZMA_decoding + Filter_decoding
-
-Compressing and decompressing speed of such filters is very high,
-so it will not increase decompressing time too much.
-Moreover, it reduces decompression time for LZMA_decoding,
-since compression ratio with filtering is higher.
-
-These filters convert CALL (calling procedure) instructions
-from relative offsets to absolute addresses, so such data becomes more
-compressible. Source code of these CALL filters is pretty simple
-(about 20 lines of C++), so you can convert it from C++ version yourself.
-
-For some ISAs (for example, for MIPS) it's impossible to get gain from such filter.
-
-
-LZMA compressed file format
----------------------------
-Offset Size Description
- 0 1 Special LZMA properties for compressed data
- 1 4 Dictionary size (little endian)
- 5 8 Uncompressed size (little endian). -1 means unknown size
- 13 Compressed data
-
-
-ANSI-C LZMA Decoder
-~~~~~~~~~~~~~~~~~~~
-
-To compile ANSI-C LZMA Decoder you can use one of the following files sets:
-1) LzmaDecode.h + LzmaDecode.c + LzmaTest.c (fastest version)
-2) LzmaDecode.h + LzmaDecodeSize.c + LzmaTest.c (old size-optimized version)
-3) LzmaStateDecode.h + LzmaStateDecode.c + LzmaStateTest.c (zlib-like interface)
-
-
-Memory requirements for LZMA decoding
--------------------------------------
-
-LZMA decoder doesn't allocate memory itself, so you must
-allocate memory and send it to LZMA.
-
-Stack usage of LZMA decoding function for local variables is not
-larger than 200 bytes.
-
-How To decompress data
-----------------------
-
-LZMA Decoder (ANSI-C version) now supports 5 interfaces:
-1) Single-call Decompressing
-2) Single-call Decompressing with input stream callback
-3) Multi-call Decompressing with output buffer
-4) Multi-call Decompressing with input callback and output buffer
-5) Multi-call State Decompressing (zlib-like interface)
-
-Variant-5 is similar to Variant-4, but Variant-5 doesn't use callback functions.
-
-Decompressing steps
--------------------
-
-1) read LZMA properties (5 bytes):
- unsigned char properties[LZMA_PROPERTIES_SIZE];
-
-2) read uncompressed size (8 bytes, little-endian)
-
-3) Decode properties:
-
- CLzmaDecoderState state; /* it's 24-140 bytes structure, if int is 32-bit */
-
- if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK)
- return PrintError(rs, "Incorrect stream properties");
-
-4) Allocate memory block for internal Structures:
-
- state.Probs = (CProb *)malloc(LzmaGetNumProbs(&state.Properties) * sizeof(CProb));
- if (state.Probs == 0)
- return PrintError(rs, kCantAllocateMessage);
-
- LZMA decoder uses array of CProb variables as internal structure.
- By default, CProb is unsigned_short. But you can define _LZMA_PROB32 to make
- it unsigned_int. It can increase speed on some 32-bit CPUs, but memory
- usage will be doubled in that case.
-
-
-5) Main Decompressing
-
-You must use one of the following interfaces:
-
-5.1 Single-call Decompressing
------------------------------
-When to use: RAM->RAM decompressing
-Compile files: LzmaDecode.h, LzmaDecode.c
-Compile defines: no defines
-Memory Requirements:
- - Input buffer: compressed size
- - Output buffer: uncompressed size
- - LZMA Internal Structures (~16 KB for default settings)
-
-Interface:
- int res = LzmaDecode(&state,
- inStream, compressedSize, &inProcessed,
- outStream, outSize, &outProcessed);
-
-
-5.2 Single-call Decompressing with input stream callback
---------------------------------------------------------
-When to use: File->RAM or Flash->RAM decompressing.
-Compile files: LzmaDecode.h, LzmaDecode.c
-Compile defines: _LZMA_IN_CB
-Memory Requirements:
- - Buffer for input stream: any size (for example, 16 KB)
- - Output buffer: uncompressed size
- - LZMA Internal Structures (~16 KB for default settings)
-
-Interface:
- typedef struct _CBuffer
- {
- ILzmaInCallback InCallback;
- FILE *File;
- unsigned char Buffer[kInBufferSize];
- } CBuffer;
-
- int LzmaReadCompressed(void *object, const unsigned char **buffer, SizeT *size)
- {
- CBuffer *bo = (CBuffer *)object;
- *buffer = bo->Buffer;
- *size = MyReadFile(bo->File, bo->Buffer, kInBufferSize);
- return LZMA_RESULT_OK;
- }
-
- CBuffer g_InBuffer;
-
- g_InBuffer.File = inFile;
- g_InBuffer.InCallback.Read = LzmaReadCompressed;
- int res = LzmaDecode(&state,
- &g_InBuffer.InCallback,
- outStream, outSize, &outProcessed);
-
-
-5.3 Multi-call decompressing with output buffer
------------------------------------------------
-When to use: RAM->File decompressing
-Compile files: LzmaDecode.h, LzmaDecode.c
-Compile defines: _LZMA_OUT_READ
-Memory Requirements:
- - Input buffer: compressed size
- - Buffer for output stream: any size (for example, 16 KB)
- - LZMA Internal Structures (~16 KB for default settings)
- - LZMA dictionary (dictionary size is encoded in stream properties)
-
-Interface:
-
- state.Dictionary = (unsigned char *)malloc(state.Properties.DictionarySize);
-
- LzmaDecoderInit(&state);
- do
- {
- LzmaDecode(&state,
- inBuffer, inAvail, &inProcessed,
- g_OutBuffer, outAvail, &outProcessed);
- inAvail -= inProcessed;
- inBuffer += inProcessed;
- }
- while you need more bytes
-
- see LzmaTest.c for more details.
-
-
-5.4 Multi-call decompressing with input callback and output buffer
-------------------------------------------------------------------
-When to use: File->File decompressing
-Compile files: LzmaDecode.h, LzmaDecode.c
-Compile defines: _LZMA_IN_CB, _LZMA_OUT_READ
-Memory Requirements:
- - Buffer for input stream: any size (for example, 16 KB)
- - Buffer for output stream: any size (for example, 16 KB)
- - LZMA Internal Structures (~16 KB for default settings)
- - LZMA dictionary (dictionary size is encoded in stream properties)
-
-Interface:
-
- state.Dictionary = (unsigned char *)malloc(state.Properties.DictionarySize);
-
- LzmaDecoderInit(&state);
- do
- {
- LzmaDecode(&state,
- &bo.InCallback,
- g_OutBuffer, outAvail, &outProcessed);
- }
- while you need more bytes
-
- see LzmaTest.c for more details:
-
-
-5.5 Multi-call State Decompressing (zlib-like interface)
-------------------------------------------------------------------
-When to use: file->file decompressing
-Compile files: LzmaStateDecode.h, LzmaStateDecode.c
-Compile defines:
-Memory Requirements:
- - Buffer for input stream: any size (for example, 16 KB)
- - Buffer for output stream: any size (for example, 16 KB)
- - LZMA Internal Structures (~16 KB for default settings)
- - LZMA dictionary (dictionary size is encoded in stream properties)
-
-Interface:
-
- state.Dictionary = (unsigned char *)malloc(state.Properties.DictionarySize);
-
-
- LzmaDecoderInit(&state);
- do
- {
- res = LzmaDecode(&state,
- inBuffer, inAvail, &inProcessed,
- g_OutBuffer, outAvail, &outProcessed,
- finishDecoding);
- inAvail -= inProcessed;
- inBuffer += inProcessed;
- }
- while you need more bytes
-
- see LzmaStateTest.c for more details:
-
-
-6) Free all allocated blocks
-
-
-Note
-----
-LzmaDecodeSize.c is size-optimized version of LzmaDecode.c.
-But compiled code of LzmaDecodeSize.c can be larger than
-compiled code of LzmaDecode.c. So it's better to use
-LzmaDecode.c in most cases.
-
-
-EXIT codes
------------
-
-LZMA decoder can return one of the following codes:
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-
-If you use callback function for input data and you return some
-error code, LZMA Decoder also returns that code.
-
-
-
-LZMA Defines
-------------
-
-_LZMA_IN_CB - Use callback for input data
-
-_LZMA_OUT_READ - Use read function for output data
-
-_LZMA_LOC_OPT - Enable local speed optimizations inside code.
- _LZMA_LOC_OPT is only for LzmaDecodeSize.c (size-optimized version).
- _LZMA_LOC_OPT doesn't affect LzmaDecode.c (speed-optimized version)
- and LzmaStateDecode.c
-
-_LZMA_PROB32 - It can increase speed on some 32-bit CPUs,
- but memory usage will be doubled in that case
-
-_LZMA_UINT32_IS_ULONG - Define it if int is 16-bit on your compiler
- and long is 32-bit.
-
-_LZMA_SYSTEM_SIZE_T - Define it if you want to use system's size_t.
- You can use it to enable 64-bit sizes supporting
-
-
-
-C++ LZMA Encoder/Decoder
-~~~~~~~~~~~~~~~~~~~~~~~~
-C++ LZMA code use COM-like interfaces. So if you want to use it,
-you can study basics of COM/OLE.
-
-By default, LZMA Encoder contains all Match Finders.
-But for compressing it's enough to have just one of them.
-So for reducing size of compressing code you can define:
- #define COMPRESS_MF_BT
- #define COMPRESS_MF_BT4
-and it will use only bt4 match finder.
-
-
----
-
-http://www.7-zip.org
-http://www.7-zip.org/support.html
+LZMA SDK 4.65
+-------------
+
+LZMA SDK provides the documentation, samples, header files, libraries,
+and tools you need to develop applications that use LZMA compression.
+
+LZMA is default and general compression method of 7z format
+in 7-Zip compression program (www.7-zip.org). LZMA provides high
+compression ratio and very fast decompression.
+
+LZMA is an improved version of famous LZ77 compression algorithm.
+It was improved in way of maximum increasing of compression ratio,
+keeping high decompression speed and low memory requirements for
+decompressing.
+
+
+
+LICENSE
+-------
+
+LZMA SDK is written and placed in the public domain by Igor Pavlov.
+
+
+LZMA SDK Contents
+-----------------
+
+LZMA SDK includes:
+
+ - ANSI-C/C++/C#/Java source code for LZMA compressing and decompressing
+ - Compiled file->file LZMA compressing/decompressing program for Windows system
+
+
+UNIX/Linux version
+------------------
+To compile C++ version of file->file LZMA encoding, go to directory
+C++/7zip/Compress/LZMA_Alone
+and call make to recompile it:
+ make -f makefile.gcc clean all
+
+In some UNIX/Linux versions you must compile LZMA with static libraries.
+To compile with static libraries, you can use
+LIB = -lm -static
+
+
+Files
+---------------------
+lzma.txt - LZMA SDK description (this file)
+7zFormat.txt - 7z Format description
+7zC.txt - 7z ANSI-C Decoder description
+methods.txt - Compression method IDs for .7z
+lzma.exe - Compiled file->file LZMA encoder/decoder for Windows
+history.txt - history of the LZMA SDK
+
+
+Source code structure
+---------------------
+
+C/ - C files
+ 7zCrc*.* - CRC code
+ Alloc.* - Memory allocation functions
+ Bra*.* - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code
+ LzFind.* - Match finder for LZ (LZMA) encoders
+ LzFindMt.* - Match finder for LZ (LZMA) encoders for multithreading encoding
+ LzHash.h - Additional file for LZ match finder
+ LzmaDec.* - LZMA decoding
+ LzmaEnc.* - LZMA encoding
+ LzmaLib.* - LZMA Library for DLL calling
+ Types.h - Basic types for another .c files
+ Threads.* - The code for multithreading.
+
+ LzmaLib - LZMA Library (.DLL for Windows)
+
+ LzmaUtil - LZMA Utility (file->file LZMA encoder/decoder).
+
+ Archive - files related to archiving
+ 7z - 7z ANSI-C Decoder
+
+CPP/ -- CPP files
+
+ Common - common files for C++ projects
+ Windows - common files for Windows related code
+
+ 7zip - files related to 7-Zip Project
+
+ Common - common files for 7-Zip
+
+ Compress - files related to compression/decompression
+
+ Copy - Copy coder
+ RangeCoder - Range Coder (special code of compression/decompression)
+ LZMA - LZMA compression/decompression on C++
+ LZMA_Alone - file->file LZMA compression/decompression
+ Branch - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code
+
+ Archive - files related to archiving
+
+ Common - common files for archive handling
+ 7z - 7z C++ Encoder/Decoder
+
+ Bundles - Modules that are bundles of other modules
+
+ Alone7z - 7zr.exe: Standalone version of 7z.exe that supports only 7z/LZMA/BCJ/BCJ2
+ Format7zR - 7zr.dll: Reduced version of 7za.dll: extracting/compressing to 7z/LZMA/BCJ/BCJ2
+ Format7zExtractR - 7zxr.dll: Reduced version of 7zxa.dll: extracting from 7z/LZMA/BCJ/BCJ2.
+
+ UI - User Interface files
+
+ Client7z - Test application for 7za.dll, 7zr.dll, 7zxr.dll
+ Common - Common UI files
+ Console - Code for console archiver
+
+
+
+CS/ - C# files
+ 7zip
+ Common - some common files for 7-Zip
+ Compress - files related to compression/decompression
+ LZ - files related to LZ (Lempel-Ziv) compression algorithm
+ LZMA - LZMA compression/decompression
+ LzmaAlone - file->file LZMA compression/decompression
+ RangeCoder - Range Coder (special code of compression/decompression)
+
+Java/ - Java files
+ SevenZip
+ Compression - files related to compression/decompression
+ LZ - files related to LZ (Lempel-Ziv) compression algorithm
+ LZMA - LZMA compression/decompression
+ RangeCoder - Range Coder (special code of compression/decompression)
+
+
+C/C++ source code of LZMA SDK is part of 7-Zip project.
+7-Zip source code can be downloaded from 7-Zip's SourceForge page:
+
+ http://sourceforge.net/projects/sevenzip/
+
+
+
+LZMA features
+-------------
+ - Variable dictionary size (up to 1 GB)
+ - Estimated compressing speed: about 2 MB/s on 2 GHz CPU
+ - Estimated decompressing speed:
+ - 20-30 MB/s on 2 GHz Core 2 or AMD Athlon 64
+ - 1-2 MB/s on 200 MHz ARM, MIPS, PowerPC or other simple RISC
+ - Small memory requirements for decompressing (16 KB + DictionarySize)
+ - Small code size for decompressing: 5-8 KB
+
+LZMA decoder uses only integer operations and can be
+implemented in any modern 32-bit CPU (or on 16-bit CPU with some conditions).
+
+Some critical operations that affect the speed of LZMA decompression:
+ 1) 32*16 bit integer multiply
+ 2) Misspredicted branches (penalty mostly depends from pipeline length)
+ 3) 32-bit shift and arithmetic operations
+
+The speed of LZMA decompressing mostly depends from CPU speed.
+Memory speed has no big meaning. But if your CPU has small data cache,
+overall weight of memory speed will slightly increase.
+
+
+How To Use
+----------
+
+Using LZMA encoder/decoder executable
+--------------------------------------
+
+Usage: LZMA <e|d> inputFile outputFile [<switches>...]
+
+ e: encode file
+
+ d: decode file
+
+ b: Benchmark. There are two tests: compressing and decompressing
+ with LZMA method. Benchmark shows rating in MIPS (million
+ instructions per second). Rating value is calculated from
+ measured speed and it is normalized with Intel's Core 2 results.
+ Also Benchmark checks possible hardware errors (RAM
+ errors in most cases). Benchmark uses these settings:
+ (-a1, -d21, -fb32, -mfbt4). You can change only -d parameter.
+ Also you can change the number of iterations. Example for 30 iterations:
+ LZMA b 30
+ Default number of iterations is 10.
+
+<Switches>
+
+
+ -a{N}: set compression mode 0 = fast, 1 = normal
+ default: 1 (normal)
+
+ d{N}: Sets Dictionary size - [0, 30], default: 23 (8MB)
+ The maximum value for dictionary size is 1 GB = 2^30 bytes.
+ Dictionary size is calculated as DictionarySize = 2^N bytes.
+ For decompressing file compressed by LZMA method with dictionary
+ size D = 2^N you need about D bytes of memory (RAM).
+
+ -fb{N}: set number of fast bytes - [5, 273], default: 128
+ Usually big number gives a little bit better compression ratio
+ and slower compression process.
+
+ -lc{N}: set number of literal context bits - [0, 8], default: 3
+ Sometimes lc=4 gives gain for big files.
+
+ -lp{N}: set number of literal pos bits - [0, 4], default: 0
+ lp switch is intended for periodical data when period is
+ equal 2^N. For example, for 32-bit (4 bytes)
+ periodical data you can use lp=2. Often it's better to set lc0,
+ if you change lp switch.
+
+ -pb{N}: set number of pos bits - [0, 4], default: 2
+ pb switch is intended for periodical data
+ when period is equal 2^N.
+
+ -mf{MF_ID}: set Match Finder. Default: bt4.
+ Algorithms from hc* group doesn't provide good compression
+ ratio, but they often works pretty fast in combination with
+ fast mode (-a0).
+
+ Memory requirements depend from dictionary size
+ (parameter "d" in table below).
+
+ MF_ID Memory Description
+
+ bt2 d * 9.5 + 4MB Binary Tree with 2 bytes hashing.
+ bt3 d * 11.5 + 4MB Binary Tree with 3 bytes hashing.
+ bt4 d * 11.5 + 4MB Binary Tree with 4 bytes hashing.
+ hc4 d * 7.5 + 4MB Hash Chain with 4 bytes hashing.
+
+ -eos: write End Of Stream marker. By default LZMA doesn't write
+ eos marker, since LZMA decoder knows uncompressed size
+ stored in .lzma file header.
+
+ -si: Read data from stdin (it will write End Of Stream marker).
+ -so: Write data to stdout
+
+
+Examples:
+
+1) LZMA e file.bin file.lzma -d16 -lc0
+
+compresses file.bin to file.lzma with 64 KB dictionary (2^16=64K)
+and 0 literal context bits. -lc0 allows to reduce memory requirements
+for decompression.
+
+
+2) LZMA e file.bin file.lzma -lc0 -lp2
+
+compresses file.bin to file.lzma with settings suitable
+for 32-bit periodical data (for example, ARM or MIPS code).
+
+3) LZMA d file.lzma file.bin
+
+decompresses file.lzma to file.bin.
+
+
+Compression ratio hints
+-----------------------
+
+Recommendations
+---------------
+
+To increase the compression ratio for LZMA compressing it's desirable
+to have aligned data (if it's possible) and also it's desirable to locate
+data in such order, where code is grouped in one place and data is
+grouped in other place (it's better than such mixing: code, data, code,
+data, ...).
+
+
+Filters
+-------
+You can increase the compression ratio for some data types, using
+special filters before compressing. For example, it's possible to
+increase the compression ratio on 5-10% for code for those CPU ISAs:
+x86, IA-64, ARM, ARM-Thumb, PowerPC, SPARC.
+
+You can find C source code of such filters in C/Bra*.* files
+
+You can check the compression ratio gain of these filters with such
+7-Zip commands (example for ARM code):
+No filter:
+ 7z a a1.7z a.bin -m0=lzma
+
+With filter for little-endian ARM code:
+ 7z a a2.7z a.bin -m0=arm -m1=lzma
+
+It works in such manner:
+Compressing = Filter_encoding + LZMA_encoding
+Decompressing = LZMA_decoding + Filter_decoding
+
+Compressing and decompressing speed of such filters is very high,
+so it will not increase decompressing time too much.
+Moreover, it reduces decompression time for LZMA_decoding,
+since compression ratio with filtering is higher.
+
+These filters convert CALL (calling procedure) instructions
+from relative offsets to absolute addresses, so such data becomes more
+compressible.
+
+For some ISAs (for example, for MIPS) it's impossible to get gain from such filter.
+
+
+LZMA compressed file format
+---------------------------
+Offset Size Description
+ 0 1 Special LZMA properties (lc,lp, pb in encoded form)
+ 1 4 Dictionary size (little endian)
+ 5 8 Uncompressed size (little endian). -1 means unknown size
+ 13 Compressed data
+
+
+ANSI-C LZMA Decoder
+~~~~~~~~~~~~~~~~~~~
+
+Please note that interfaces for ANSI-C code were changed in LZMA SDK 4.58.
+If you want to use old interfaces you can download previous version of LZMA SDK
+from sourceforge.net site.
+
+To use ANSI-C LZMA Decoder you need the following files:
+1) LzmaDec.h + LzmaDec.c + Types.h
+LzmaUtil/LzmaUtil.c is example application that uses these files.
+
+
+Memory requirements for LZMA decoding
+-------------------------------------
+
+Stack usage of LZMA decoding function for local variables is not
+larger than 200-400 bytes.
+
+LZMA Decoder uses dictionary buffer and internal state structure.
+Internal state structure consumes
+ state_size = (4 + (1.5 << (lc + lp))) KB
+by default (lc=3, lp=0), state_size = 16 KB.
+
+
+How To decompress data
+----------------------
+
+LZMA Decoder (ANSI-C version) now supports 2 interfaces:
+1) Single-call Decompressing
+2) Multi-call State Decompressing (zlib-like interface)
+
+You must use external allocator:
+Example:
+void *SzAlloc(void *p, size_t size) { p = p; return malloc(size); }
+void SzFree(void *p, void *address) { p = p; free(address); }
+ISzAlloc alloc = { SzAlloc, SzFree };
+
+You can use p = p; operator to disable compiler warnings.
+
+
+Single-call Decompressing
+-------------------------
+When to use: RAM->RAM decompressing
+Compile files: LzmaDec.h + LzmaDec.c + Types.h
+Compile defines: no defines
+Memory Requirements:
+ - Input buffer: compressed size
+ - Output buffer: uncompressed size
+ - LZMA Internal Structures: state_size (16 KB for default settings)
+
+Interface:
+ int LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+ ELzmaStatus *status, ISzAlloc *alloc);
+ In:
+ dest - output data
+ destLen - output data size
+ src - input data
+ srcLen - input data size
+ propData - LZMA properties (5 bytes)
+ propSize - size of propData buffer (5 bytes)
+ finishMode - It has meaning only if the decoding reaches output limit (*destLen).
+ LZMA_FINISH_ANY - Decode just destLen bytes.
+ LZMA_FINISH_END - Stream must be finished after (*destLen).
+ You can use LZMA_FINISH_END, when you know that
+ current output buffer covers last bytes of stream.
+ alloc - Memory allocator.
+
+ Out:
+ destLen - processed output size
+ srcLen - processed input size
+
+ Output:
+ SZ_OK
+ status:
+ LZMA_STATUS_FINISHED_WITH_MARK
+ LZMA_STATUS_NOT_FINISHED
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+ SZ_ERROR_DATA - Data error
+ SZ_ERROR_MEM - Memory allocation error
+ SZ_ERROR_UNSUPPORTED - Unsupported properties
+ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
+
+ If LZMA decoder sees end_marker before reaching output limit, it returns OK result,
+ and output value of destLen will be less than output buffer size limit.
+
+ You can use multiple checks to test data integrity after full decompression:
+ 1) Check Result and "status" variable.
+ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
+ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
+ You must use correct finish mode in that case. */
+
+
+Multi-call State Decompressing (zlib-like interface)
+----------------------------------------------------
+
+When to use: file->file decompressing
+Compile files: LzmaDec.h + LzmaDec.c + Types.h
+
+Memory Requirements:
+ - Buffer for input stream: any size (for example, 16 KB)
+ - Buffer for output stream: any size (for example, 16 KB)
+ - LZMA Internal Structures: state_size (16 KB for default settings)
+ - LZMA dictionary (dictionary size is encoded in LZMA properties header)
+
+1) read LZMA properties (5 bytes) and uncompressed size (8 bytes, little-endian) to header:
+ unsigned char header[LZMA_PROPS_SIZE + 8];
+ ReadFile(inFile, header, sizeof(header)
+
+2) Allocate CLzmaDec structures (state + dictionary) using LZMA properties
+
+ CLzmaDec state;
+ LzmaDec_Constr(&state);
+ res = LzmaDec_Allocate(&state, header, LZMA_PROPS_SIZE, &g_Alloc);
+ if (res != SZ_OK)
+ return res;
+
+3) Init LzmaDec structure before any new LZMA stream. And call LzmaDec_DecodeToBuf in loop
+
+ LzmaDec_Init(&state);
+ for (;;)
+ {
+ ...
+ int res = LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode);
+ ...
+ }
+
+
+4) Free all allocated structures
+ LzmaDec_Free(&state, &g_Alloc);
+
+For full code example, look at C/LzmaUtil/LzmaUtil.c code.
+
+
+How To compress data
+--------------------
+
+Compile files: LzmaEnc.h + LzmaEnc.c + Types.h +
+LzFind.c + LzFind.h + LzFindMt.c + LzFindMt.h + LzHash.h
+
+Memory Requirements:
+ - (dictSize * 11.5 + 6 MB) + state_size
+
+Lzma Encoder can use two memory allocators:
+1) alloc - for small arrays.
+2) allocBig - for big arrays.
+
+For example, you can use Large RAM Pages (2 MB) in allocBig allocator for
+better compression speed. Note that Windows has bad implementation for
+Large RAM Pages.
+It's OK to use same allocator for alloc and allocBig.
+
+
+Single-call Compression with callbacks
+--------------------------------------
+
+Check C/LzmaUtil/LzmaUtil.c as example,
+
+When to use: file->file decompressing
+
+1) you must implement callback structures for interfaces:
+ISeqInStream
+ISeqOutStream
+ICompressProgress
+ISzAlloc
+
+static void *SzAlloc(void *p, size_t size) { p = p; return MyAlloc(size); }
+static void SzFree(void *p, void *address) { p = p; MyFree(address); }
+static ISzAlloc g_Alloc = { SzAlloc, SzFree };
+
+ CFileSeqInStream inStream;
+ CFileSeqOutStream outStream;
+
+ inStream.funcTable.Read = MyRead;
+ inStream.file = inFile;
+ outStream.funcTable.Write = MyWrite;
+ outStream.file = outFile;
+
+
+2) Create CLzmaEncHandle object;
+
+ CLzmaEncHandle enc;
+
+ enc = LzmaEnc_Create(&g_Alloc);
+ if (enc == 0)
+ return SZ_ERROR_MEM;
+
+
+3) initialize CLzmaEncProps properties;
+
+ LzmaEncProps_Init(&props);
+
+ Then you can change some properties in that structure.
+
+4) Send LZMA properties to LZMA Encoder
+
+ res = LzmaEnc_SetProps(enc, &props);
+
+5) Write encoded properties to header
+
+ Byte header[LZMA_PROPS_SIZE + 8];
+ size_t headerSize = LZMA_PROPS_SIZE;
+ UInt64 fileSize;
+ int i;
+
+ res = LzmaEnc_WriteProperties(enc, header, &headerSize);
+ fileSize = MyGetFileLength(inFile);
+ for (i = 0; i < 8; i++)
+ header[headerSize++] = (Byte)(fileSize >> (8 * i));
+ MyWriteFileAndCheck(outFile, header, headerSize)
+
+6) Call encoding function:
+ res = LzmaEnc_Encode(enc, &outStream.funcTable, &inStream.funcTable,
+ NULL, &g_Alloc, &g_Alloc);
+
+7) Destroy LZMA Encoder Object
+ LzmaEnc_Destroy(enc, &g_Alloc, &g_Alloc);
+
+
+If callback function return some error code, LzmaEnc_Encode also returns that code.
+
+
+Single-call RAM->RAM Compression
+--------------------------------
+
+Single-call RAM->RAM Compression is similar to Compression with callbacks,
+but you provide pointers to buffers instead of pointers to stream callbacks:
+
+HRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+ CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+
+Return code:
+ SZ_OK - OK
+ SZ_ERROR_MEM - Memory allocation error
+ SZ_ERROR_PARAM - Incorrect paramater
+ SZ_ERROR_OUTPUT_EOF - output buffer overflow
+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
+
+
+
+LZMA Defines
+------------
+
+_LZMA_SIZE_OPT - Enable some optimizations in LZMA Decoder to get smaller executable code.
+
+_LZMA_PROB32 - It can increase the speed on some 32-bit CPUs, but memory usage for
+ some structures will be doubled in that case.
+
+_LZMA_UINT32_IS_ULONG - Define it if int is 16-bit on your compiler and long is 32-bit.
+
+_LZMA_NO_SYSTEM_SIZE_T - Define it if you don't want to use size_t type.
+
+
+C++ LZMA Encoder/Decoder
+~~~~~~~~~~~~~~~~~~~~~~~~
+C++ LZMA code use COM-like interfaces. So if you want to use it,
+you can study basics of COM/OLE.
+C++ LZMA code is just wrapper over ANSI-C code.
+
+
+C++ Notes
+~~~~~~~~~~~~~~~~~~~~~~~~
+If you use some C++ code folders in 7-Zip (for example, C++ code for .7z handling),
+you must check that you correctly work with "new" operator.
+7-Zip can be compiled with MSVC 6.0 that doesn't throw "exception" from "new" operator.
+So 7-Zip uses "CPP\Common\NewHandler.cpp" that redefines "new" operator:
+operator new(size_t size)
+{
+ void *p = ::malloc(size);
+ if (p == 0)
+ throw CNewException();
+ return p;
+}
+If you use MSCV that throws exception for "new" operator, you can compile without
+"NewHandler.cpp". So standard exception will be used. Actually some code of
+7-Zip catches any exception in internal code and converts it to HRESULT code.
+So you don't need to catch CNewException, if you call COM interfaces of 7-Zip.
+
+---
+
+http://www.7-zip.org
+http://www.7-zip.org/sdk.html
+http://www.7-zip.org/support.html
--
1.6.0.4
^ permalink raw reply related [flat|nested] 20+ messages in thread