From: Christian Kroehnert <christian.kroehnert@avionic-design.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard
Date: Thu, 19 Apr 2012 14:41:22 +0200 [thread overview]
Message-ID: <jmp15j$1q2$1@dough.gmane.org> (raw)
In-Reply-To: <1326588449-1794-1-git-send-email-sjg@chromium.org>
On 15.01.2012 01:47, Simon Glass wrote:
> This series adds support for the Tegra2x's display peripheral. This
> supports the LCD display on Seaboard and we use this to enable console
> output in U-Boot on the LCD.
>
> Configuration is via the device tree. Proposed bindings are included
> in this series.
>
> To improve performance two optimisations are offered:
>
> 1. The LCD frame buffer is cached, with the cache being flushed after
> each call puts(). This dramatically increases performance (around 10x).
> This requires a few additions to the ARM cache support.
>
> 2. The console supports scrolling in steps of more than 1 line. This
> speeds up scrolling output considerably, particularly commands like
> 'printenv' which display a lot of output. This requires a new CONFIG
> and a change to the console_scrollup() function.
>
>
> Mayuresh Kulkarni (1):
> tegra: Enable display/lcd support on Seaboard
>
> Simon Glass (15):
> fdt: Add function to look up a phandle's register address
> fdt: Add header guard to fdtdec.h
> fdt: Correct GPIO name access in fdtdec
> tegra: Add display support to funcmux
> tegra: fdt: Add LCD definitions for Tegra
> tegra: Add support for PWFM
> tegra: Add LCD driver
> tegra: Add LCD support to Nvidia boards
> arm: Add control over cachability of memory regions
> lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU
> lcd: Add support for flushing LCD fb from dcache after update
> tegra: Align LCD frame buffer to section boundary
> tegra: Support control of cache settings for LCD
> tegra: fdt: Add LCD definitions for Seaboard
> lcd: Add CONSOLE_SCROLL_LINES option to speed console
>
> Wei Ni (1):
> tegra: Add SOC support for display/lcd
>
> README | 16 +
> arch/arm/cpu/armv7/cache_v7.c | 11 +
> arch/arm/cpu/armv7/tegra2/Makefile | 1 +
> arch/arm/cpu/armv7/tegra2/display.c | 271 +++++++++++
> arch/arm/cpu/armv7/tegra2/funcmux.c | 39 ++
> arch/arm/cpu/armv7/tegra2/pwfm.c | 40 ++
> arch/arm/dts/tegra20.dtsi | 25 +
> arch/arm/include/asm/arch-tegra2/dc.h | 544 +++++++++++++++++++++++
> arch/arm/include/asm/arch-tegra2/display.h | 133 ++++++
> arch/arm/include/asm/arch-tegra2/pwfm.h | 54 +++
> arch/arm/include/asm/system.h | 30 ++
> arch/arm/lib/cache-cp15.c | 62 +++-
> board/nvidia/common/board.c | 21 +-
> board/nvidia/dts/tegra2-seaboard.dts | 21 +
> common/cmd_echo.c | 3 +-
> common/lcd.c | 85 +++-
> doc/device-tree-bindings/video/nvidia-video.txt | 92 ++++
> drivers/video/Makefile | 1 +
> drivers/video/tegra.c | 388 ++++++++++++++++
> include/configs/seaboard.h | 12 +-
> include/configs/tegra2-common.h | 1 +
> include/fdtdec.h | 17 +
> include/lcd.h | 11 +
> lib/fdtdec.c | 15 +-
> 24 files changed, 1862 insertions(+), 31 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra2/display.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/pwfm.c
> create mode 100644 arch/arm/include/asm/arch-tegra2/dc.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/display.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/pwfm.h
> create mode 100644 doc/device-tree-bindings/video/nvidia-video.txt
> create mode 100644 drivers/video/tegra.c
>
Hi Simon,
I have added your patch sources manually into the "Prepare v2012.04-rc1
release", because I got errors at apply. Also I added a device tree
source file for Harmony.
I tested the device tree source file for Harmony and your patch sources
on our Harmony hardware and generated a new patch file:
http://poeggi.dotsec.net/nvidia/uboot-lvds-init-patch/0001-Add-display-driver-and-LCD-support-for-Harmony-board.patch
I hope it's all okay, this my first patch release.
In the display.c source file I implemented a bug fix, because I get
garbled images on the LCD without this fix.
Greetings
Christian
Changes:
- Add device tree source file for Harmony board
- Add bug fix in display.c
- Patch based on the "Prepare v2012.04-rc1" release
---
README | 7 +
arch/arm/cpu/armv7/cache_v7.c | 11 +
arch/arm/cpu/armv7/tegra2/Makefile | 1 +
arch/arm/cpu/armv7/tegra2/display.c | 282 ++++++++++++
arch/arm/cpu/armv7/tegra2/funcmux.c | 41 ++
arch/arm/cpu/armv7/tegra2/pwfm.c | 45 ++
arch/arm/dts/tegra20.dtsi | 26 ++
arch/arm/include/asm/arch-tegra2/dc.h | 544
+++++++++++++++++++++++
arch/arm/include/asm/arch-tegra2/display.h | 133 ++++++
arch/arm/include/asm/arch-tegra2/pwfm.h | 54 +++
arch/arm/include/asm/system.h | 30 ++
arch/arm/lib/cache-cp15.c | 61 +++-
board/nvidia/common/board.c | 20 +
board/nvidia/dts/tegra2-harmony.dts | 97 ++++
board/nvidia/dts/tegra2-seaboard.dts | 21 +
common/cmd_echo.c | 2 +-
common/lcd.c | 86 +++-
doc/device-tree-bindings/video/nvidia-video.txt | 92 ++++
drivers/video/Makefile | 1 +
drivers/video/tegra.c | 397 +++++++++++++++++
dts/Makefile | 2 +-
include/configs/harmony.h | 39 ++-
include/configs/tegra2-common.h | 218 +++++++++-
include/fdtdec.h | 19 +-
include/lcd.h | 12 +
lib/fdtdec.c | 12 +
26 files changed, 2206 insertions(+), 47 deletions(-)
create mode 100644 arch/arm/cpu/armv7/tegra2/display.c
create mode 100644 arch/arm/cpu/armv7/tegra2/pwfm.c
create mode 100644 arch/arm/include/asm/arch-tegra2/dc.h
create mode 100644 arch/arm/include/asm/arch-tegra2/display.h
create mode 100644 arch/arm/include/asm/arch-tegra2/pwfm.h
create mode 100644 board/nvidia/dts/tegra2-harmony.dts
create mode 100644 doc/device-tree-bindings/video/nvidia-video.txt
create mode 100644 drivers/video/tegra.c
next prev parent reply other threads:[~2012-04-19 12:41 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-15 0:47 [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 01/17] fdt: Add function to look up a phandle's register address Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 02/17] fdt: Add header guard to fdtdec.h Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 03/17] fdt: Correct GPIO name access in fdtdec Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 04/17] tegra: Add display support to funcmux Simon Glass
2012-01-15 1:36 ` Mike Frysinger
2012-06-13 12:15 ` Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 05/17] tegra: fdt: Add LCD definitions for Tegra Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 06/17] tegra: Add support for PWFM Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 07/17] tegra: Add SOC support for display/lcd Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 08/17] tegra: Add LCD driver Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 09/17] tegra: Add LCD support to Nvidia boards Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 10/17] arm: Add control over cachability of memory regions Simon Glass
2012-02-10 20:38 ` Albert ARIBAUD
2012-03-04 6:20 ` Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 11/17] lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU Simon Glass
2012-01-15 1:38 ` Mike Frysinger
2012-06-13 12:23 ` Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update Simon Glass
2012-01-15 1:42 ` Mike Frysinger
2012-01-15 1:57 ` Simon Glass
2012-01-15 2:16 ` Mike Frysinger
2012-06-13 12:25 ` Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 13/17] tegra: Align LCD frame buffer to section boundary Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 14/17] tegra: Support control of cache settings for LCD Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 15/17] tegra: fdt: Add LCD definitions for Seaboard Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 16/17] lcd: Add CONSOLE_SCROLL_LINES option to speed console Simon Glass
2012-01-15 0:47 ` [U-Boot] [PATCH 17/17] tegra: Enable display/lcd support on Seaboard Simon Glass
2012-04-19 12:41 ` Christian Kroehnert [this message]
2012-07-14 8:03 ` [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard Simon Glass
2012-07-17 16:11 ` Thierry Reding
2012-07-18 6:51 ` Simon Glass
2012-07-19 12:01 ` Christian Kroehnert
2012-07-24 19:16 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='jmp15j$1q2$1@dough.gmane.org' \
--to=christian.kroehnert@avionic-design.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox