[U-Boot-Users] MCF5271 Port.

[Adarsh Babu <adarshrbpin@yahoo.co.in>]

Adarsh Babu <adarshrbpin <at> yahoo.co.in> writes:

> 
> Zachary P. Landau <kapheine <at> gmail.com> writes:
> 
> > 
> > On 1/29/07, Wolfgang Denk <wd <at> denx.de> wrote:
> > > In message <371814.45747.qm <at> web8321.mail.in.yahoo.com> you wrote:
> > > > I am new to U-Boot. I downloaded u-boot-1.1.6 and plan
> > > > to use the same on the MCF5271 EVB. My host system has
> > > > Red Hat 6.
> > >
> > > Sounds as if you have a favour for old code. Be aware  that  problems
> > > may be lurking in that corner.
> > >
> > > > m68k-elf-gcc: hello_world.o: No such file or directory
> > > > m68k-elf-gcc: unrecognized option `-MQ'
> > > > m68k-elf-gcc: stubs.o: No such file or directory
> > > > m68k-elf-gcc: unrecognized option `-MQ'
> > > ...
> > > Seems your toolchain is not working. Try another one.
> > 
> > As Wolfgang says, old toolchains will do this.  When trying to compile a 
> recent
> > checkout using the 20010318 Snapgear toolchain, I got the same error.  
When I
> > upgraded to the 20060615 release, it worked.
> > 
> > Also note that someone recently had a different problem with compiling the 
> 5271
> > port using the 20060615 toolchain.  Here's a link to his post and someone's
> > reply on how to fix it:
> > 
> > 
> 
http://comments.gmane.org/gmane.comp.hardware.motorola.microcontrollers.coldfir
> e/7212.
> > I haven't looked at the issue yet.  If you (or anyone) gets a chance, it'd 
be
> > helpful to know what the issue is and if this is a real fix or just a
> > workaround.
> > 
> 
> 
Hi Zachary,

Well thanks a lot. The 20060615 tool chain along with the suggestion in the 
link that you sent me did the trick. But now I face a different problem. I did 
get a neat build and the u-boot.bin file. I flashed the same onto the EVB. But 
i can't get a u-boot prompt on Minicom. Its just blank and nothing else. I 
opened the Srec file and compared it with the Srec file I got for MCF5272 with 
u-boot1.1.2 and seemed pretty ok. Do I have to do something to get it on the 
console ? is there any other modifications that i need to do other than make 
M5271EVB_config and make ??? 

Please help me out.

Regards,
Adarsh.