From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Tue, 19 May 2009 16:20:56 +0200 Subject: [U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6 In-Reply-To: <6fea6ac20905180726y6e27d6f5wfd98c8cd763758b4@mail.gmail.com> (vishal dahiwal's message of "Mon, 18 May 2009 19:56:55 +0530") References: <6fea6ac20905180726y6e27d6f5wfd98c8cd763758b4@mail.gmail.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Vishal, > I am new to uBoot. Welcome. > I am using the sbc2410x board. I successfully compiled the uboot-1.1.6 for > this board. But after downloading the uboot.bin to the flash, i am not > getting the uboot prompt on serial terminal. As Wolfgang said - in the long run switching to latest code is a must if you want to get free support. > I am using the NAND flash. Do i have to make the changes for NAND flash and > recompile the uboot? Actually I doubt that this board support had a NAND boot in mind - but looking at include/configs/sbc2410x.h only JinHua Luo will know for sure, so I put him on CC. Cheers Detlev -- Computers are useless. They can only give you answers. -- Pablo Picasso -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de