From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Wed, 12 Jan 2011 11:20:20 +0100 Subject: [U-Boot] [PATCH 2/2] mpc5200, digsy_mtc: add support for rev5 board version In-Reply-To: <4D2D7122.60909@denx.de> (Heiko Schocher's message of "Wed, 12 Jan 2011 10:15:14 +0100") References: <1294816806-32614-1-git-send-email-hs@denx.de> <1294816806-32614-2-git-send-email-hs@denx.de> <20110112075920.A87E2CEFAB6@gemini.denx.de> <4D2D7122.60909@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Heiko, [...] >>> diff --git a/boards.cfg b/boards.cfg >>> index 94b8745..9e1fc14 100644 >>> --- a/boards.cfg >>> +++ b/boards.cfg >>> @@ -241,6 +241,9 @@ cm5200 powerpc mpc5xxx >>> digsy_mtc powerpc mpc5xxx digsy_mtc >>> digsy_mtc_LOWBOOT powerpc mpc5xxx digsy_mtc - - >>> digsy_mtc:SYS_TEXT_BASE=0xFF000000 >>> digsy_mtc_RAMBOOT powerpc mpc5xxx digsy_mtc - - >>> digsy_mtc:SYS_TEXT_BASE=0x00100000 >>> +digsy_mtc_rev5 powerpc mpc5xxx digsy_mtc - - digsy_mtc:DIGSY_REV5 >>> +digsy_mtc_rev5_LOWBOOT powerpc mpc5xxx digsy_mtc - - >>> digsy_mtc:SYS_TEXT_BASE=0xFF000000,DIGSY_REV5 >>> +digsy_mtc_rev5_RAMBOOT powerpc mpc5xxx digsy_mtc - - >>> digsy_mtc:SYS_TEXT_BASE=0x00100000,DIGSY_REV5 >> >> Do we really need all these 6 configurations for the digsy_mtc board? >> Are all of them actively being used? > > Good question, I just used digsy_mtc_rev5, digsy_mtc_rev5_RAMBOOT, > maybe the LOWBOOT case could be deleted. Yes, the LOWBOOT cases can be removed. The hardware can not be configured in a way to use them. Cheers Detlev -- We can forgive a man for making a useful thing as long as he does not admire it. The only excuse for making a useless thing is that one admires it intensely. --- Oscar Wilde -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de