From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Thu, 02 Dec 2010 10:23:23 +0100 Subject: [U-Boot] [STATUS] v2010.12-rc2 released In-Reply-To: (Sekhar Nori's message of "Wed, 1 Dec 2010 15:16:33 +0530") References: <20101130150020.8FD9811D94FE@gemini.denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Sekhar, > Hmm, I had tested DA850 EVM yesterday with U-Boot 2010.12-rc2, > and was able to successfully boot (at least most of the times). > > ---logs---- > Booting with TI UBL > Device OPP (300MHz, 1.2V) > > U-Boot 2010.12-rc2 (Nov 30 2010 - 11:55:35) > > I2C: ready > DRAM: 128 MiB > Using default environment > > In: serial > Out: serial > Err: serial > Net: Ethernet PHY: GENERIC @ 0x00 > > DA850-evm > > -------- > > Some of the times, the boot hung after printing DRAM: 128 MiB, > but never did it hang without printing anything. And what is the reason why it hung after printing the DRAM message? In effect you say that you also see a bug, so is it correct to assume that you're looking into it? Thanks Detlev -- Perfection (in design) is achieved not when there is nothing more to add, but rather when there is nothing more to take away. -- Antoine de Saint-Exupery -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de