From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Wed, 19 Sep 2007 22:17:56 +0200 Subject: [U-Boot-Users] Debugging u-boot on a custom 8548 board In-Reply-To: <46F179A9.5030403@smiths-aerospace.com> (Jerry Van Baren's message of "Wed\, 19 Sep 2007 15\:34\:01 -0400") References: <46F179A9.5030403@smiths-aerospace.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Jerry and Robert, > You might want to telnet directly into the BDI and use the BDI > breakpoint and go commands directly. Additionally I wanted to hint at the fact that all the BDI "telnet commands" can be accessed through the "monitor" gdb command. So without switching any terminal you can easily do a "mon info" from gdb for example. The convenience of this is worth the risk of iterating well known facts :) Cheers Detlev -- Alisa Sherer (AMD) suggested that consumer demand will not follow faster clock speeds. Marketing might help with this problem, she added. -- 2004/02/20 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de