From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Wed, 12 Jan 2011 11:00:50 +0100 Subject: [U-Boot] [PATCH 2/2] mpc5200, digsy_mtc: add support for rev5 board version In-Reply-To: <20110112093711.35C7ACEFAB6@gemini.denx.de> (Wolfgang Denk's message of "Wed, 12 Jan 2011 10:37:11 +0100") References: <1294816806-32614-1-git-send-email-hs@denx.de> <1294816806-32614-2-git-send-email-hs@denx.de> <20110112075920.A87E2CEFAB6@gemini.denx.de> <4D2D7122.60909@denx.de> <20110112093711.35C7ACEFAB6@gemini.denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Wolfgang, > Dear Heiko Schocher, > > In message <4D2D7122.60909@denx.de> you wrote: >> >> > Global question: do we really need an CONFIG_DIGSY_REV5? Is there not >> > a way to determine the revision by probing the hardware? For example, >> > the RTC's show up at different addresses on the bus - but ther emight >> > be even easier ways? >> >> Good question ... as I know, there is no possibility to detect the >> hardware on an other way then over the RTC ... and I don;t want to >> go this way ... what if the RTC is not responding? > > Maybe you can ask the hardware guys again? We did this and we are sure that there is no better way. Cheers Detlev -- When you loosen yourself from all the obvious delusions - religion, ideology, Communism - you're still left with the myth of your own goodness. Which is the final delusion. -- Philip Roth -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de