From: Detlev Zundel <dzu@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] latest-git, mpc8540 targets: ld: u-boot: section `.bootpg' can't be allocated in segment 1
Date: Wed, 19 Sep 2007 15:56:33 +0200 [thread overview]
Message-ID: <m28x7269ny.fsf@ohwell.denx.de> (raw)
In-Reply-To: <46EFE821.40707@anagramm.de> (Clemens Koller's message of "Tue\, 18 Sep 2007 17\:00\:49 +0200")
Hi Clemens,
> I just checked out the latest u-boot git HEAD and did a
>
> $ make PM854_config
> or a
> $ make TQM8540_config
> followed by a
> $ make all
> using binutils-2.18, gcc-4.2.1, kernel 2.6.21 on a native mpc8540 environment.
I checked PM854 with gcc-4.2.0 and binutils-2.17.50.0.12 working as a
cross-compiler (ELDK 4.2 alpha) and only see warnings (maybe they help
you daignose the problem):
make[1]: Leaving directory `/.automount/castor-vlab/root/home/dzu/src/git/u-boot/libfdt'
UNDEF_SYM=`ppc_85xx-objdump -x lib_generic/libgeneric.a board/pm854/libpm854.a cpu/mpc85xx/libmpc85xx.a lib_ppc/libppc.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/bios_emulator/libatibiosemu.a drivers/nand/libnand.a drivers/nand_legacy/libnand_legacy.a drivers/net/libnet.a drivers/qe/qe.a drivers/serial/libserial.a drivers/sk98lin/libsk98lin.a post/libpost.a post/drivers/libpostdrivers.a post/lib_ppc/libpostppc.a post/lib_ppc/fpu/libpostppcfpu.a common/libcommon.a libfdt/libfdt.a |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
cd /.automount/castor-vlab/root/home/dzu/src/git/u-boot && ppc_85xx-ld -Bstatic -T /.automount/castor-vlab/root/home/dzu/src/git/u-boot/board/pm854/u-boot.lds -Ttext 0xfff80000 -n $UNDEF_SYM cpu/mpc85xx/start.o cpu/mpc85xx/resetvec.o \
--start-group lib_generic/libgeneric.a board/pm854/libpm854.a cpu/mpc85xx/libmpc85xx.a lib_ppc/libppc.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/bios_emulator/libatibiosemu.a drivers/nand/libnand.a drivers/nand_legacy/libnand_legacy.a drivers/net/libnet.a drivers/qe/qe.a drivers/serial/libserial.a drivers/sk98lin/libsk98lin.a post/libpost.a post/drivers/libpostdrivers.a post/lib_ppc/libpostppc.a post/lib_ppc/fpu/libpostppcfpu.a common/libcommon.a libfdt/libfdt.a --end-group -L /opt/eldk-4.2-2007-08-22/usr/bin/../lib/gcc/powerpc-linux/4.2.0/m8540/pic -lgcc \
-Map u-boot.map -o u-boot
ppc_85xx-ld: warning: dot moved backwards before `.bootpg'
ppc_85xx-ld: warning: dot moved backwards before `.rela.text'
ppc_85xx-ld: warning: dot moved backwards before `.bootpg'
ppc_85xx-ld: warning: dot moved backwards before `.rela.text'
ppc_85xx-ld: warning: dot moved backwards before `.text'
ppc_85xx-objcopy --gap-fill=0xff -O srec u-boot u-boot.srec
ppc_85xx-objcopy --gap-fill=0xff -O binary u-boot u-boot.bin
[dzu at pollux u-boot]$
ELDK 4.1 (gcc-4.0.0 + binutils 2.16.1) doesn't even throw warnings, so
I'd say check for changes in binutil (once more).
Cheers
Detlev
--
Q: What do you get when you cross an elephant and a banana?
A: |elephant| * |banana| * sin(theta)
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
next prev parent reply other threads:[~2007-09-19 13:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-18 15:00 [U-Boot-Users] latest-git, mpc8540 targets: ld: u-boot: section `.bootpg' can't be allocated in segment 1 Clemens Koller
2007-09-19 13:56 ` Detlev Zundel [this message]
2007-09-19 14:29 ` Clemens Koller
2007-09-19 14:39 ` Grant Likely
2007-09-19 15:44 ` Clemens Koller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m28x7269ny.fsf@ohwell.denx.de \
--to=dzu@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox