From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Mon, 28 Mar 2011 14:49:31 +0200 Subject: [U-Boot] [Patch v2 0/2] rtc, rv3029: add support for trickle charger In-Reply-To: <1301297063-4072-1-git-send-email-hs@denx.de> (Heiko Schocher's message of "Mon, 28 Mar 2011 09:24:21 +0200") References: <1301293299-28335-1-git-send-email-hs@denx.de> <1301297063-4072-1-git-send-email-hs@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hallo Heiko, > This patchseries adds trickle charger support for the > RTC RV3029 and add it to the existing digsy_mtc board > (rev5 boards only). > > changes for v2: > - set CONFIG_SYS_RV3029_TCR to 5k Ohm > > checkpatch says: > > total: 0 errors, 0 warnings, 117 lines checked > > 20110328_2/0001-rtc-rv3029-add-trickle-charger-support.patch has no obvious style problems and is ready for submission. > total: 0 errors, 0 warnings, 8 lines checked > > 20110328_2/0002-mpc52xx-digsy_mtc-add-trickle-charger-support-for-re.patch has no obvious style problems and is ready for submission. > > Heiko Schocher (2): > rtc, rv3029: add trickle charger support. > mpc52xx, digsy_mtc: add trickle charger support for rev5 boards. > > README | 2 + > drivers/rtc/rv3029.c | 87 +++++++++++++++++++++++++++++++++++++++++++ > include/configs/digsy_mtc.h | 2 + > 3 files changed, 91 insertions(+), 0 deletions(-) Looks good, so Acked-by: Detlev Zundel Cheers Detlev -- It's like manually inflatable airbags -- people will never think to use it in time to actually get any help from it. -- Miles Bader in <20030607122005.GA1086@gnu.org> -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de