[U-Boot] [PATCH] AT91: reset.c: fix comments, add option

[Detlev Zundel <dzu@denx.de>]

Hi Reinhard,

> - The comment was wrong/misleading
> - One would assume that a u-boot "reset" command should also
> reset the external hardware outside the SoC. Since its unknown
> whether some boards rely on that NOT being so, asserting the
> external reset signal is optional
>
> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
> ---
>  arch/arm/cpu/arm926ejs/at91/reset.c |   17 ++++++++---------
>  1 files changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/cpu/arm926ejs/at91/reset.c b/arch/arm/cpu/arm926ejs/at91/reset.c
> index 1b67e77..22f3277 100644
> --- a/arch/arm/cpu/arm926ejs/at91/reset.c
> +++ b/arch/arm/cpu/arm926ejs/at91/reset.c
> @@ -27,18 +27,17 @@
>  #include <asm/arch/at91_rstc.h>
>  #include <asm/arch/io.h>
>  
> -/*
> - * Reset the cpu by setting up the watchdog timer and let him time out.
> - */
> +/* Reset the cpu by telling the reset controller to do so */
>  void reset_cpu(ulong ignored)
>  {
>  	at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE;
>  
> -	/* this is the way Linux does it */
> -
> -	writel(AT91_RSTC_KEY | AT91_RSTC_CR_PROCRST | AT91_RSTC_CR_PERRST,
> -		&rstc->cr);
> -
> +	writel(AT91_RSTC_KEY
> +		| AT91_RSTC_CR_PROCRST	/* Processor Reset */
> +		| AT91_RSTC_CR_PERRST	/* Peripheral Reset */
> +#ifdef CONFIG_AT91RESET_EXTRST
> +		| AT91_RSTC_CR_EXTRST	/* External Reset (assert nRST pin) */
> +#endif
> +		, &rstc->cr);
>  	while (1);

While you're at it, please put the semi-colon in the next line to clearly
show the empty command.

> -	/* Never reached */

Was this comment misleading?  Why not leave it in?

Cheers
  Detlev

-- 
Restrict Digital Restrictions Management:
If you can't copy it - don't buy it
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de