[U-Boot] my u-boot freezing at Uncompress Linux...

[U-Boot] my u-boot freezing at Uncompress Linux...

[SlinceArm]

Hi. dear all

my u-boot-2008.03 use tftp download my kernel , 

but my u-boot was frezzing at Uncompressing Linux ...

and show nothing anymore in my console

i try another way to start my kernel : nfs , but there is the same issue in
my u-boot .


//here are is u-boot information in my console 

TFTP from server 192.168.1.3; our IP address is 192.168.1.8                     
Filename 'uImage'.                                                              
Load address: 0x31000000                                                        
Loading: #################################################################      
         ###############################                                        
done                                                                            
Bytes transferred = 1403736 (156b58 hex)                                        
## Booting kernel from Legacy Image at 31000000 ...                             
   Image Name:   slincearm_bootloader                                           
   Created:      2009-05-19   5:11:32 UTC                                       
   Image Type:   ARM Linux Kernel Image (uncompressed)                          
   Data Size:    1403672 Bytes =  1.3 MB                                        
   Load Address: 31000000                                                       
   Entry Point:  31000040                                                       
   Verifying Checksum ... OK                                                    
   XIP Kernel Image ... OK                                                      
OK                                                                              
                                                                                
Starting kernel ...                                                             
                                                                                
Uncompressing
Linux.............................................................

-- 
View this message in context: http://www.nabble.com/my-u-boot-freezing-at-Uncompress-Linux...-tp23610073p23610073.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

[U-Boot] my u-boot freezing at Uncompress Linux...

[Detlev Zundel]

Hi SlinceArm,

> my u-boot-2008.03 use tftp download my kernel , 
>
> but my u-boot was frezzing at Uncompressing Linux ...

I doubt that.  Actually your Linux kernel freezes - U-Boots last message
is the "Starting kernel .." message.  It's all Linux from there.

So start troubleshooting your kernel.  Searching the archieve for this
mailing list will probably be a good start point.

Cheers
  Detlev

-- 
"Win32 sucks so hard it could pull matter out of a Black Hole."
                                          -- Pohl Longsine
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de

[U-Boot] my u-boot freezing at Uncompress Linux...

[SlinceArm]

>I doubt that.  Actually your Linux kernel freezes - U-Boots last message
>is the "Starting kernel .." message.  It's all Linux from there.
>So start troubleshooting your kernel.  Searching the archieve for this
>mailing list will probably be a good start point.

thanks for your reply , Detlev  : )

i rebuild a new kernel-2.6.24 and my console  freezes at "Starting
kernel..."
and i will search  this issue in forum .

but i still confuse 
in my case , it mean my u-boot setting is "correct" and my kernel cause this
issue ??



-- 
View this message in context: http://www.nabble.com/-U-boot-my-u-boot-freezing-at-Uncompress-Linux...-tp23610073p23650633.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

[U-Boot] my u-boot freezing at Uncompress Linux...

[Detlev Zundel]

Hi SlinceArm,

> i rebuild a new kernel-2.6.24 and my console freezes at "Starting
> kernel..."  and i will search this issue in forum .

Good luck.

> but i still confuse in my case , it mean my u-boot setting is
> "correct" and my kernel cause this issue ??

I'm not sure what you mean by "U-Boot settings", but as you can see,
U-Boot loads a kernel and transfers control to it, so I don't know what
should be wrong in U-Boot _itself_.  

Of course on the other hand, U-Boot transfers a commandline (bootargs)
and the mystical a-tags to a Linuxkernel which interprets them, so this
is also something you should check.

Cheers
  Detlev

-- 
Bacchus, n. A convenient deity invented by the ancients as an excuse for
getting drunk.
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de