From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Fri, 21 May 2010 10:57:20 +0200 Subject: [U-Boot] Support for MB86R01 cpu In-Reply-To: <438D4C5EFBCC4EE3B5EB73773E2B37DE@itd210> (Thirumalai's message of "Wed, 19 May 2010 12:17:40 +0530") References: <4BF22A31.3070903@arcor.de> <1238804852F24724A07DBA8AE25FC385@itd210> <4BF2D30D.7090903@arcor.de> <438D4C5EFBCC4EE3B5EB73773E2B37DE@itd210> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Thirumalai, > Hi Matthias, > >> Hi Thirumalai >> >> Am 18.05.2010 08:29, schrieb Thirumalai: >>> Hi Matthias, >>> I am going to use u-boot alone for my development. Which debugger >>> is >>> suitable for debugging u-boot and initial board bringup activity? >>> My choice is BDI2000. Is it ok. >> >> Yes. As I said. But I never used it to debug u-boot together together >> with GDB. After the serial console was up I used printf-like debugging. >> And before that point I could live quite good with simple BDI commands. >> > > Whether source level debugging is possible with BDI2000? Yes of course this is possible. It's even in the documentation: http://www.denx.de/wiki/view/DULG/DebuggingUBoot Cheers Detlev -- Wenn ein Kopf und ein Buch zusammenstossen und es klingt hohl; ist denn das allemal im Buche? - Lichtenberg -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de