From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Mon, 29 Mar 2010 11:39:54 +0200 Subject: [U-Boot] [PATCH] cmd_onenand.c: moved to standard subcommand handling In-Reply-To: (Frans Meulenbroeks's message of "Mon, 29 Mar 2010 11:28:31 +0200") References: <1269706476-20496-1-git-send-email-fransmeulenbroeks@gmail.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Frans, > 2010/3/29 Detlev Zundel : >> Hi Frans, >> >>> Forgot this disclaimer, thought I added it, sry. >>> >>> NOTE: >>> This code is untested as I have no board with onenand support. >>> However, it compiles properly (tested by building opap3_evm, which uses this). >>> The changes I did are purely splitting do_onenand in separate >>> functions and add the subcommand parsing (which itself was taken from >>> i2c, on which I tested it before). >>> So I do not expect any serious issues, but I would suggest testing >>> this before integrating it. >> >> Why don't you just add the maintainer of omap3_evm board (as I did) on >> CC to your mail, so he knows that his testing would be greatly >> appreciated? >> > Will try to do so next time :-) > Actually there are more boards which utilize onenand. I just picked > this one as I have an omap3 board (and actually only discovered when I > wanted to start testing that it did not have onenand, but just regular > nand) Hm ok, then maybe add someone else from the list of boards using it, as the e-mail of the omap3_evm maintainer "Manikandan Pillai " bounces. I added Nishanth Menon from ti on CC, maybe he can tell us the whereabouts of Manikanden. Will someone else from ti be maintaining this board? If so, then a patch to MAINTAINERS is welcome :) Cheers Detlev -- Those who would trade safety for freedom deserve neither. -- Thomas Jefferson -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de