[U-Boot] [PATCH 2/3] digsy MTC: Add SPI support.

[Detlev Zundel <dzu@denx.de>]

Hi Grzegorz,

> Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
> ---
>  board/digsy_mtc/digsy_mtc.c |   14 ++++++++++++++
>  include/configs/digsy_mtc.h |    7 +++++++
>  2 files changed, 21 insertions(+), 0 deletions(-)
>
> diff --git a/board/digsy_mtc/digsy_mtc.c b/board/digsy_mtc/digsy_mtc.c
> index 83d5864..36bbbc5 100644
> --- a/board/digsy_mtc/digsy_mtc.c
> +++ b/board/digsy_mtc/digsy_mtc.c
> @@ -186,6 +186,10 @@ int checkboard(void)
>  
>  int board_early_init_r(void)
>  {
> +#ifdef CONFIG_MPC52XX_SPI
> +	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
> +	struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt*)MPC5XXX_GPT;
> +#endif
>  	/*
>  	 * Now, when we are in RAM, enable flash write access for detection
>  	 * process.  Note that CS_BOOT cannot be cleared when executing in
> @@ -202,6 +206,16 @@ int board_early_init_r(void)
>  	/* Low level USB init, required for proper kernel operation */
>  	usb_cpu_init();
>  #endif
> +#ifdef CONFIG_MPC52XX_SPI
> +	/* SPI on Tmr2/3/4/5 pins */
> +	gpio->port_config |= 0x20000000;
> +
> +	/* GPT 6 Output Enable */
> +	gpt[6].emsr = 0x00000034 ;
> +	/* GPT 7 Output Enable */
> +	gpt[7].emsr = 0x00000034 ;
> +#endif

You want to use accessor macros here.

Cheers
  Detlev

-- 
The latest code  looks a bit similar to the old  [linux] big-reader-locks  hack
(which got dropped for good many eons ago and with which i deny any involvement
with, such as having authored it. [oh, did i say that out loud? crap.]), imple-
mented cleanly and properly.     -- Ingo Molnar <20090428124033.GA1655@elte.hu>
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de