[U-Boot-Users] [PATCH] Move AT91RM9200DK board support under board/atmel

[U-Boot-Users] [PATCH] Move AT91RM9200DK board support under board/atmel

[Peter Pearse]

 

> -----Original Message-----
> From: wd at denx.de [mailto:wd at denx.de] 
> Sent: 16 March 2008 22:21
> To: Peter Pearse
> Cc: Haavard Skinnemoen
> Subject: Re: [U-Boot-Users] [PATCH] Move AT91RM9200DK board 
> support under board/atmel
> 
> Dear Peter,

-- snip ---

> 
> i. e. something or someone mangled the mail addresses.

-- snip ---
> 
> You see, while the issue looks not really impotant at first 
> glance it might leave a bad (political) aftertaste in cases 
> like here where the attribution of  contributions  from  one  
> company  (Atmel)  get  lost because  of  modifications  done 
> by another company (ARM), especially since both companies 
> have to be seen as competitors.

I believe you misunderstand the relationship between ARM and Atmel here.
However, I agree this is unacceptable, and am investigating how it occurred.

Regards

Peter

[U-Boot-Users] [PATCH] Move AT91RM9200DK board support underboard/atmel

[Peter Pearse]

 

> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net 
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf 
> Of Peter Pearse
> Sent: 17 March 2008 11:12
> To: wd at denx.de
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] [PATCH] Move AT91RM9200DK board 
> support underboard/atmel
> 
>  
> 
> > -----Original Message-----
> > From: wd at denx.de [mailto:wd at denx.de]
> > Sent: 16 March 2008 22:21
> > To: Peter Pearse
> > Cc: Haavard Skinnemoen
> > Subject: Re: [U-Boot-Users] [PATCH] Move AT91RM9200DK board support 
> > under board/atmel
> > 
> > Dear Peter,
> 
> -- snip ---
> 
> > 
> > i. e. something or someone mangled the mail addresses.
> 
> -- snip ---
> However, I agree this is unacceptable, and am investigating 
> how it occurred.
>

I believe this occurred, after I realized Outlook was reformatting 
my patches, and before I got Evolution running. I was desperate 
enough to cut and paste from the GMane list.

My apologies to Haavard.

I will make sure this doesn't happen again

Regards

Peter


-- 
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium.  Thank you.

[U-Boot-Users] [PATCH] Move AT91RM9200DK board support underboard/atmel

[Haavard Skinnemoen]

On Mon, 17 Mar 2008 11:56:57 -0000
"Peter Pearse" <Peter.Pearse@arm.com> wrote:

> I believe this occurred, after I realized Outlook was reformatting 
> my patches, and before I got Evolution running. I was desperate 
> enough to cut and paste from the GMane list.

I was suspecting something like that ;)

> My apologies to Haavard.

No problem.

> I will make sure this doesn't happen again

Good. There's an astonishing number of traps to avoid when sending
patches via e-mail...

Haavard

[U-Boot-Users] [PATCH] Move AT91RM9200DK board support underboard/atmel

[Stefan Roese]

On Wednesday 19 March 2008, Haavard Skinnemoen wrote:
> Good. There's an astonishing number of traps to avoid when sending
> patches via e-mail...

That's why I'm a big fan of "git-send-email". :)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot-Users] [PATCH] Move AT91RM9200DK board support underboard/atmel

[Detlev Zundel]

Hello Peter & Haavard,

> I believe this occurred, after I realized Outlook was reformatting 
> my patches, and before I got Evolution running. I was desperate 
> enough to cut and paste from the GMane list.
>
> My apologies to Haavard.
>
> I will make sure this doesn't happen again

Our statistics generation process now fixes up the mangled address for
Haavard and Bernhard Nemec, the only two authors being hit by this
mangling.

The next statistics will accurately reflect facts.

Cheers
  Detlev

-- 
Whatever you do will be insignificant,
but it is very important that you do it.
                                        -- Mahatma Gandhi
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de