From mboxrd@z Thu Jan  1 00:00:00 1970
From: Detlev Zundel <dzu@denx.de>
Date: Wed, 13 Aug 2008 11:54:06 +0200
Subject: [U-Boot] U-Boot Boot Count Limit
In-Reply-To: <20080811154620.GA19080@lisa> ("Markus =?utf-8?Q?Klotzb=C3=BC?=
	=?utf-8?Q?cher=22's?= message of
	"Mon, 11 Aug 2008 17:46:20 +0200")
References: <op.ufp6c7uht06gyn@beierlein-pc> <20080811154620.GA19080@lisa>
Message-ID: <m2myjhs0jl.fsf@ohwell.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Axel,

> On Mon, Aug 11, 2008 at 03:56:57PM +0200, Axel Beierlein wrote:
>
>> does U-Boot support the Boot Count Limit functionality for a MPC5200?
>
> AFAIK no.
>
>> My last information was that is only supported for MPC8xxx and MPC82xx PPC.
>
> Not quite, e.g. a quick grep turns up support for mpc8260, 4xx, ixp,
> ... but not for MPC5200. Implementing it should not be very diffcult
> though, I would assume.

Yes, use the "breadcrumb register" and I'm serious about that (chapter
5-14) ;)

Cheers
  Detlev

-- 
Der Kluge tue gleich anfangs, was der Dumme erst am Ende.
                                    --- Baltasar Gracian
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de