From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Wed, 02 Jul 2008 20:09:55 +0200 Subject: [U-Boot-Users] Flash Initializing problem, porting u-boot-1.1.3 on mpc850 In-Reply-To: (li xuguang's message of "Sun, 29 Jun 2008 20:35:46 +0800") References: Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Li, > I am try to port u-boot-1.1.3 on a board with the processor MPC850. And i try > to change the board of TQM850. Why do you want to port such an old version od U-Boot? You will not get much support from this list, as development is only done on the current versions available from the git repositories. Also when you switch to a current U-Boot, you will see that also the TQM850 board switched over to using the CFI driver that very likely also supports your flash out of the box. So my suggestion is do not invest time in such an old version, but restart from current top of tree U-Boot. Cheers Detlev -- An elephant is a mouse with an operating system. -- Donald Knuth -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de