[U-Boot] [PATCH v2 2/2] MX31: mx31pdk: Print the cause of reset

[Detlev Zundel <dzu@denx.de>]

Hi Fabio,

> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Changes since v1:
> - Use 3 bits for rcsr mask
>
>  board/freescale/mx31pdk/mx31pdk.c |   25 ++++++++++++++++++++++++-
>  1 files changed, 24 insertions(+), 1 deletions(-)
>
> diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
> index 4ef548f..5fc6319 100644
> --- a/board/freescale/mx31pdk/mx31pdk.c
> +++ b/board/freescale/mx31pdk/mx31pdk.c
> @@ -86,7 +86,30 @@ int board_late_init(void)
>  
>  int checkboard(void)
>  {
> -	printf("Board: i.MX31 MAX PDK (3DS)\n");
> +	u32 cause;
> +	struct clock_control_regs *ccm =
> +		(struct clock_control_regs *)CCM_BASE;
> +	puts("Board: MX31PDK [");
> +
> +	cause = ccm->rcsr & 0x07;
> +	switch (cause) {
> +	case 0x0000:
> +		puts("POR");
> +		break;
> +	case 0x0001:
> +		puts("RST");
> +		break;
> +	case 0x0002:
> +		puts("WDOG");
> +		break;
> +	case 0x0006:
> +		puts("JTAG");
> +		break;
> +	default:
> +		puts("unknown");
> +	}
> +
> +	puts("]\n");
>  	return 0;
>  }

Didn't we agree to move this into CPU specific code so other i.MX31
boards will profit from it as well?  Can you remind me why this does not
happen?

Cheers
  Detlev

-- 
Don't trust everything you read, and don't assume every poster in
a thread is actually relevant to the problem.
        -- Stefan Monnier <jwvlj1gk44h.fsf-monnier+emacs@gnu.org>
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de