From mboxrd@z Thu Jan  1 00:00:00 1970
From: Detlev Zundel <dzu@denx.de>
Date: Thu, 23 Sep 2010 10:21:23 +0200
Subject: [U-Boot] [PATCH v3] ppc4xx/fdt/flash: Change
	fdt_fixup_nor_flash_node() to not rely on cs size
In-Reply-To: <1285083088-13049-1-git-send-email-sr@denx.de> (Stefan Roese's
	message of "Tue, 21 Sep 2010 17:31:28 +0200")
References: <1285083088-13049-1-git-send-email-sr@denx.de>
Message-ID: <m2y6asswe4.fsf@ohwell.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Stefan,

> This patch changes the behaviour of the fdt_fixup_nor_flash_node()
> function. Now it doesn't patch the size of the "reg" property with the
> chip-select size, but with the size returned from the new function
> flash_get_bank_size(). This function will return per weak default the
> flash size of the bank (bank = chip-select numer) detected by the flash
> driver. If this does not fit your needs, this function may be overridden
> by a board specific one.
>
> For this the parameters needed to be changed. So I intentionally squashed
> the PPC4xx stuff using this routine into this patch. Otherwise it would
> not be git-bisectable anymore.
>
> The board specific function for the AMCC/APM Ebony eval board is now
> included in this patch version.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Gerald Van Baren <vanbaren@cideas.com>
> Cc: Wolfgang Denk <wd@denx.de>
>
> ppc4xx: Add board specific function to return the detected flash size
>
> This function will be called to fixup size of the "reg" property of the
> NOR flash device tree nodes. Ebony can't use the weak default, since
> it has a special chip-select to bank-number binding.
>
> Signed-off-by: Stefan Roese <sr@denx.de>

Tested-by: Detlev Zundel <dzu@denx.de>

For the negative test yesterday I indeed used the wrong branch, sorry
for the noise.

Cheers
  Detlev

-- 
Computers are useless. They can only give you answers.
             -- Pablo Picasso
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de