[U-Boot] Board Support for Quantum (Eurotech Ltd)

[U-Boot] Board Support for Quantum (Eurotech Ltd)

[A. Geisreiter]

Hello,

 

I need U-Boot support for the Quantum Board (XScale PXA270 CPU) from
EuroTech Ltd. Does anybody know if it exist a patch for this board? In the
U-Boot configs is a patch for a Quantum board, but I think this is for
another one.

 

Thank you,

Andreas

______________________________________________________________

Andreas Geisreiter

Development Department

DH electronics GmbH - Am Anger 8 - 83346 Bergen - Germany 

HRB Traunstein 9602 - Ust ID Nr.: DE 174 205 805 

Gesch?ftsf?hrung Dipl.-Ing. Stefan Daxenberger, Dipl.-Ing. Helmut Henschke

Email:  <blocked::mailto:ageisreiter@dh-electronics.de>
ageisreiter at dh-electronics.de 

Web: www.dh-electronics.de <blocked::www.dh-electronics.de> 

 

[U-Boot] Board Support for Quantum (Eurotech Ltd)

[Detlev Zundel]

Hi Andreas,

> I need U-Boot support for the Quantum Board (XScale PXA270 CPU) from
> EuroTech Ltd. Does anybody know if it exist a patch for this board? In the
> U-Boot configs is a patch for a Quantum board, but I think this is for
> another one.

In include/configs/quantum.h:

#define CONFIG_MPC850           1       /* This is a MPC850 CPU */

So this is indeed not what you are looking for.

If I grep for "PXA" in the same directory I also cannot find something
resembling what you are looking for, so I'm sorry I cannot help you.

Cheers
  Detlev

-- 
A zen-buddhist walked into a pizza shop and
said, "Make me one with everything."
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de

[U-Boot] MPC8548: U-boot "Got error 4" while receiving packets

[Ajeesh Kumar]

 
Hi, 

We are using u-boot for our custom board having MPC8548. Board is able to
come up properly.
MPC connected to DSP via (MPC : RGMII)-SGMII-SGMII-(RGMII : DSP).
We are able to send packets from MPC to DSP successfully, but when DSP
intern sends back to MPC 
we are getting below error on u-boot console.
       Got error 4
       Got error 4.

I came to know, 
"Got error 4" is a CRC error indication in the status bits of the receive
buffer descriptor (tsec.h).

What might be the problem, Why is it happening so?? Is there a way to get
break through.
Please help us in regard at the earliest.

Thanks & Regards
Ajeesh Kumar