[U-Boot] [U-Boot, v2, 1/1] board: arm: Add support for Broadcom BCM7445

[Thomas Fitzsimmons <fitzsim@fitzsim.org>]

Tom Rini <trini@konsulko.com> writes:

> On Wed, May 23, 2018 at 09:24:03PM -0400, Thomas Fitzsimmons wrote:
>
>> Add support for loading U-Boot on the Broadcom 7445 SoC.  This port
>> assumes Broadcom's BOLT bootloader is acting as the second stage
>> bootloader, and U-Boot is acting as the third stage bootloader, loaded
>> as an ELF program by BOLT.
>> 
>> Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
>> Cc: Stefan Roese <sr@denx.de>
>> Cc: Tom Rini <trini@konsulko.com>
>> Cc: Florian Fainelli <f.fainelli@gmail.com>
>
> Please rebase this to master.  While I can fixup the SPDX tags (and some
> formatting issues from checkpatch.pl)

I think I fixed all of these in v3 (just posted), by adding an entry to
top-level MAINTAINERS and using the new SPDX formatting rules.

> I also run in to: +(bcm7445) In file included from
> ../arch/arm/include/asm/system.h:6:0, +(bcm7445) from
> ../arch/arm/include/asm/cache.h:11, +(bcm7445) from
> ../include/net.h:15, +(bcm7445) from ../include/common.h:519,
> +(bcm7445) from ../lib/asm-offsets.c:14: +(bcm7445)
> ../arch/arm/include/asm/barriers.h:32:24: error: operator '>=' has no
> left operand +(bcm7445) #if __LINUX_ARM_ARCH__ >= 7 +(bcm7445) ^~
> +(bcm7445) ../arch/arm/include/asm/barriers.h:36:26: error: operator
> '==' has no left operand +(bcm7445) #elif __LINUX_ARM_ARCH__ == 6
> +(bcm7445) ^~ +(bcm7445) make[2]: *** [.././Kbuild:44:
> lib/asm-offsets.s] Error 1 +(bcm7445) make[1]: *** [Makefile:1433:
> prepare0] Error 2
>
> Please look into, thanks!

This was caused by a Kconfig option being renamed on master (CPU_V7 to
CPU_V7A).  Fixed in v3.

Thanks,
Thomas