[U-Boot] [PATCH 2/7] AT49BV322A Flash: the erase regions are in the wrong order.

[David Wu <davidwu@arcturusnetworks.com>]

Hi Stefan,

I am new here and I am not quite clear about how to split this patch.
Any suggestion?

Regards,
David
On Thu, 08 Apr 2010 05:35:35 -0400, Stefan Roese <sr@denx.de> wrote:

> On Thursday 08 April 2010 02:00:23 David Wu wrote:
>>     The device id for this Flash is 0xc8.
>>
>> Signed-off-by: David Wu <davidwu@arcturusnetworks.com>
>> ---
>>   drivers/mtd/cfi_flash.c |    4 +++-
>>   1 files changed, 3 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
>> index fdba297..af86f99 100644
>> --- a/drivers/mtd/cfi_flash.c
>> +++ b/drivers/mtd/cfi_flash.c
>> @@ -1690,8 +1690,10 @@ static void flash_fixup_atmel(flash_info_t *info,
>> struct cfi_qry *qry)
>>   	/* AT49BV6416(T) list the erase regions in the wrong order.
>>   	 * However, the device ID is identical with the non-broken
>>   	 * AT49BV642D they differ in the high byte.
>> +	 * AT49BV322A is also in the wrong order.
>>   	 */
>> -	if (info->device_id == 0xd6 || info->device_id == 0xd2)
>> +	if (info->device_id == 0xd6 || info->device_id == 0xd2 ||
>> +	    info->device_id == 0xc8)
>>   		reverse_geometry = !reverse_geometry;
>>
>>   	if (reverse_geometry)
>
> Could you please split this patch from the patch series. I'll push it  
> via the
> CFI git repository then. Thanks.
>
> Cheers,
> Stefan
>
> --
> DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
>
>