* [U-Boot] espressobin u-boot firmware @ 2017-11-12 10:36 Matwey V. Kornilov 2017-11-12 11:07 ` Matwey V. Kornilov 0 siblings, 1 reply; 3+ messages in thread From: Matwey V. Kornilov @ 2017-11-12 10:36 UTC (permalink / raw) To: u-boot Hello, I am trying to follow this thread: https://www.mail-archive.com/u-boot at lists.denx.de/msg257116.html to boot espressobin from SATA device. Currently, the only thing what I see when try to boot is the following: TIM-1.0 After some time, I see > from UART bootloader. How could I figure out what I did wrong? ^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] espressobin u-boot firmware 2017-11-12 10:36 [U-Boot] espressobin u-boot firmware Matwey V. Kornilov @ 2017-11-12 11:07 ` Matwey V. Kornilov 2017-11-13 15:49 ` Matwey V. Kornilov 0 siblings, 1 reply; 3+ messages in thread From: Matwey V. Kornilov @ 2017-11-12 11:07 UTC (permalink / raw) To: u-boot SATA image from here: http://wiki.espressobin.net/tiki-index.php?page=Boot+ESPRESSObin+from+SATA+drive doesn't even print "TIM-1.0" for me 12.11.2017 13:36, Matwey V. Kornilov пишет: > Hello, > > I am trying to follow this thread: > https://www.mail-archive.com/u-boot at lists.denx.de/msg257116.html to boot > espressobin from SATA device. > > Currently, the only thing what I see when try to boot is the following: > > TIM-1.0 > > After some time, I see > from UART bootloader. > > How could I figure out what I did wrong? > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot > ^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] espressobin u-boot firmware 2017-11-12 11:07 ` Matwey V. Kornilov @ 2017-11-13 15:49 ` Matwey V. Kornilov 0 siblings, 0 replies; 3+ messages in thread From: Matwey V. Kornilov @ 2017-11-13 15:49 UTC (permalink / raw) To: u-boot When I use ATF tools from armada-17.08 release everything builds and boots fine. armaba-17.10 seems to be broken(?) 12.11.2017 14:07, Matwey V. Kornilov пишет: > > SATA image from here: > > http://wiki.espressobin.net/tiki-index.php?page=Boot+ESPRESSObin+from+SATA+drive > > doesn't even print "TIM-1.0" for me > > 12.11.2017 13:36, Matwey V. Kornilov пишет: >> Hello, >> >> I am trying to follow this thread: >> https://www.mail-archive.com/u-boot at lists.denx.de/msg257116.html to boot >> espressobin from SATA device. >> >> Currently, the only thing what I see when try to boot is the following: >> >> TIM-1.0 >> >> After some time, I see > from UART bootloader. >> >> How could I figure out what I did wrong? >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot at lists.denx.de >> https://lists.denx.de/listinfo/u-boot >> > > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-11-13 15:49 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-11-12 10:36 [U-Boot] espressobin u-boot firmware Matwey V. Kornilov 2017-11-12 11:07 ` Matwey V. Kornilov 2017-11-13 15:49 ` Matwey V. Kornilov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox